Abstract
Samples of alumina, zirconia and their mixtures were prepared using powders produced by two different processes. The first process only involved the flo-deflocculation of diluted suspensions whereas the second required two steps, first flo-deflocculation and then ball milling of the slurries. Materials comprising a matrix containing a relatively small quantity of the dispersed phase (20 vol% and 80 vol% ZrO2) show better properties when they are produced from flo-deflocculated powders. When samples contain a large quantity of the dispersed phase, milling after flo-deflocculation is beneficial because it provides better homogeneity, which provides greater density and strength although toughness is not significantly improved.
Similar content being viewed by others
References
M. Ruhle, N. Claussen and A. H. Heuer, J. Amer. Ceram. Soc. 69 (3) (1986) 195.
B. Kibbel and A. H. Heuer, ibid 69 (3) (1986) 231.
N. Claussen, R. L. Cox and S. J. Wallace, ibid 65 (11) (1982) C190.
S. Hori, M. Yoshimura, S. Somiya, R. Kurita and H. Kaji J. Mater. Sci. Lett. 4, (1985) 413.
A. H. Chokshi, T. G. Nieh and J. Wadsworth, J. Amer. Ceram. Soc. 74 (4) (1991) 869.
T. Masaki and K. Sinjo, Ceram. Int. 13 (1987) 109.
T. G. Nieh, C. M. McNally and J. Wadsworth, Scripta Metall. 23 (4) (1989) 457.
K. Tsukuma, K. Ueda and M. Shimada, J. Amer. Ceram. Soc. 68 (1) (1985) C4.
P. Homerin, F. Thevenot, G. Orange, G. Fantozzi, V. Vandeneede, A. Leriche and F. Cambier, J. de. Physique, 47 (1986) C717.
F. F. Lange and M. M. Hirlinger, J. Amer. Ceram. Soc. 67 (3) (1984) 164.
I. A. Aksay, F. F. Lange and B. I. Davis, ibid 66 (10) (1983) C190.
R. K. Roeder, G. A. Steinlage, K. P. Trumble and K. J. Bowman, ibid 78(9) (1995) 2367.
E. Beylier, R. L. Pober and M. J. Cima, in “Ceramic transactions, vol. 12, ceramic powder science III,” edited by G. L. Messing, S. Hirano and H. Hausner, (American Ceramic Society Westerville, OH, 1990) pp. 529–36.
W. Hutsman, T. Graule and L. J. gauckler, Eur. Ceram. Soc. 13 (1994) 33.
M. D. Sacks, H. W. Lee and O. E. Rojas, in “Ceramic transactions, vol. 1, ceramic powder science II”, edited by G. L. Messing, E. Fuller and H. Hausner, (American Ceramic Society, Westerville, OH, 1988) pp. 440–51.
M. D. Sacks, H. W. Lee and O. E. Rojas, J. Amer. Ceram. Soc. 71(5) (1988) 370.
M. J. Lokett and H. M. Habbooby, Trans. Inst. Chem. Engng. 51 (1973) 281.
F. F. Lange, J. Amer. Ceram. Soc. 72(1) (1989) 3.
P. Chantikul, G. R. Anstis, B. R. Lawn and D. B. Marshall, ibid 64(9) (1981) 539.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Burelli, M., Maschio, S. & Meriani, S. Mechanical properties of flo-deflocculated and milled powders in the Al2O3/ZrO2(CeO2) system. Journal of Materials Science 33, 441–444 (1998). https://doi.org/10.1023/A:1004388217317
Issue Date:
DOI: https://doi.org/10.1023/A:1004388217317