Abstract
Handled stainless steel (SS) structures often need accurate passivating treatments before use. Until now the most frequently used passivating pastes have been based on nitric (fluoridric) acid and, as a result, are responsible for consequent environmental problems. This work addresses the SS passivation quality of two low environmental impact pastes, based on peroximonosulfate (P2) or sodium perborate (P3). Tests were conducted on various materials using electrochemical tests (cyclic voltammetry, anodic potentiostatic transients, open-circuit potential (E) decay), Microscopic and Inductively Coupled Plasma (ICP) measurements. The results, when compared with those obtained on the same materials by using a conventional nitric acid paste (P1), indicate that the proposed pastes P2 and P3 are time stable, non toxic and as efficient as the P1 paste. Moreover, the protection of the tested SS can be further enhanced by adding small amounts of citric acid to, in particular, the P3 paste.
Similar content being viewed by others
References
R. Ramasubramanian, N. Preocanin and R.D. Davidson, J. Elec-trochem. Soc. 134 (1985) 739.
J. Gallus-Olender, B. Franc, A. Lanowy, M. Szlezak, J. Francuz, G. Ratka and B. Kapko, POL. PL 158, 060 (CI. C23F11/04) (31 July 1992), Appl. 272, 551 (17 May 1988), 3 pp.
I. Magyar, D. Titkos, F. Magyar, and T. Szoke (Vas Megyei Kemenysepro es Tuzelestechnikai Vallalat, Szombathely), Hung. Teljes HU 47, 651 (CI. C23G1/02) (28 Mar. 1989), Appl. 87/1, 685 (16 Apr. 1987), 7 pp.
Z. Kizkova, Z. Marcanova and J. Dostal, Czech, CS 218, 389 (CI. C23G1/18) (15 Feb. 1985), Appl. 81/2, 588 (6 Apr. 1981), 3 pp.
Z. Svobodny, J. Kos, J Nemcova, V. Stradova, P. Andel and F. Kalny, (SVU Ochrani Materialu G.V. Akinova), Czech. Rep. CZ 278, 566 (CI. C23G1/00) (16 Mar. 1994), Appl. 6, 186 (1 Nov. 1989), 5 pp.
W. Wiedner, R. Bielecki, R. Heuber, G. Meissner, G. Petzold and H.W. Wolf (VEB Chemiecombinat Bitterfeld), Ger (East) DD 248, 379 (CI. 23G1/108) (5 Aug. 1987), Appl. 289, 458 (22 April 1986).
X. Deng and X. Xu (Damin steel works) Faming Zhuanli Shenqing Gongkai Shuomingshu CN 86, 101, 522 (CI. C23G1/04) (27 Jan 1988), Appl. (7 July 1986), 6 pp.
‘Handbook of Metals’ Vol. 5, ASM International (1987) pp. 558-61.
UNI 3666, Italy (1954).
A. J. Bard, ‘Electroanalytical chemistry’ (Dekker, New York 1996).
F. Graham and H. Brookes, Electrochim. Acta 33 (1988) 1475.
K. Ogura and T. Majima, Electrochim. Acta 25 (1979) 325.
K. Ogura and K. Sato, Electrochim. Acta 25 (1980) 857.
A. Rauscher, H. Konno and M. Nagayama, Electrochim. Acta 22 (1977) 823.
K. Ogura and Y. Miwa, J. Electroanal. Chem. 130 (1981) 189.
J. Kruger, Corros. Sci. 29 (1989) 149.
J.A. Bardwell, B. Macdougall and M.J. Graham, J. Electrochem. Soc. 135 (1988) 413.
C.P. Dillon, Mater. Performa., 33 (5) (1994) 62.
P. Ippoliti, E. Ippoliti, C. Zeggioululy and A. Mascioli, ‘Analisi Chimica Quantitativa’ (Signorelli Editore, Napoli-Italy, 1986). 1322.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Capobianco, G., Faccin, G., Gambirasi, A. et al. New passivating pastes for stainless steel without nitric acid. Journal of Applied Electrochemistry 29, 1317–1322 (1999). https://doi.org/10.1023/A:1003729126524
Issue Date:
DOI: https://doi.org/10.1023/A:1003729126524