Abstract
A model for the capacitance of anode foil used in aluminium electrolytic capacitors is compared with experimental data for commercial foils from two different manufacturers. These foils are obtained by anodic electrochemical etching to produce a porous tunnel etched structure, followed by formation of a layer of dielectric aluminium oxide in the pores. Data for the density and size of tunnels is obtained by sectioning the foil parallel to its surface with an ultramicrotome to several depths. In this paper the internal structure is modelled as a spatially random collection of hollow dielectric cylinders. Comparison of the measured capacitance with that calculated from the dimensional data and the model are in good agreement. The model predicts optimum values for tunnel size and density as a function of oxide thickness.
Similar content being viewed by others
References
A.R. Morley and D.S. Campbell, Radio Electron. Eng. 43 (1973) 421.
C.K. Dyer and R.S. Alwitt, J. Electrochem. Soc. 128 (1981) 300.
H. Uchi, R. Yonemori, H. Sugiyama and A. Yamada, Japan J. Technol. Educ. 2 (1993) 33.
D. Goad, J. Electrochem. Soc. 144 (1997) 1965.
B.J. Wiersma and K.R. Hebert, J. Electrochem. Soc. 138 (1991) 48.
R.S. Alwitt, H. Uchi, T.R. Beck and R.C. Alkire, J. Electrochem. Soc. 131 (1984) 13.
A. Kioke, H. Fujiwara and M. Manabu, Japanese patent 2 303 018 (1990).
KDK Corporation, Tokyo, Japan, Catalog EF-153, section 11, test methods (1996).
C.G. Dunn, R.B. Bolon, A.S. Alwan and A.W. Stirling, J. Electrochem. Soc. 118 (1971) 381.
L.A. Kostelova, R.A. Mirziev, I.T. Rosin and E.V. Kharitonov, Elektrokhimiya 15 (1979) 648.
K. Shimizu, G.M. Brown, K. Kobayashi, P. Skeldon, G.E. Thompson and G.C. Wood, ATB Metallurgie 27 (1997) 188.
N. Reid and J.E. Beesley, ‘Sectioning and Cryosectioning for Electron Microscopy’, (Elsevier, Oxford, 1991).
D. Halliday and R. Resnick, ‘Physics’, 2nd edn, (J. Wiley & Sons, New York, 1966), chapter 30.
C.K. Dyer and R.S. Alwitt, Electrochim. Acta 23 (1978) 347.
G.E.P. Box, W.G. Hunter and J.S. Hunter, ‘Statistics for Experimenters’ (J. Wiley & Sons, New York, 1978).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Goad, D.G.W., Uchi, H. Modelling the capacitance of d.c. etched aluminium electrolytic capacitor foil. Journal of Applied Electrochemistry 30, 285–291 (2000). https://doi.org/10.1023/A:1003527316173
Issue Date:
DOI: https://doi.org/10.1023/A:1003527316173