Abstract
A battery was constructed by including a polymer proton conductor, poly(propargyl alcohol) doped with perchloric acid, between electrodes of magnesium and gold. The characteristics of the cell, showing an open circuit voltage of 2.0–2.2V, were studied as the function of the relative humidity. It was found that the system behaves as a fuel cell and that the discharge current of the battery is due to magnesium oxidation at the anode and proton reduction at the cathode.
Similar content being viewed by others
References
B. Scrosati and R. J. Neat, Lithium-polymer batteries, in ‘Applications of Electroactive Polymers’, (edited by B. Scrosati), Chapman & Hall, London (1993), p. 182.
M.J. Yang, H. Sun, G. Casalbore-Miceli, N. Camaioni and C.-M. Mari, Synth. Met. (1996), in press.
M. Campos, G. Casalbore-Miceli, N. Camaioni and G. Chiodelli, Synth. Met. 73 (1995) 131.
F. Capuano, G. Casalbore-Miceli, G. Giro and B. Scrosati, J. Appl. Electrochem. 24 (1994) 114.
M.J. Yang, M. Zheng, A. Furlani and M.V. Russo, J. Polym. Sci., Chem. Ed. 32 (1994) 2709.
N. Bonanos, B.C.H. Steele, E.B. Butler, W.B. Johnson, W.L. Worrell, D.D. Macdonald and M.C.H. McKubre, Applications of impedance spectroscopy, in `Impedance Spectroscopy', (edited by J. Ross Macdonald), Wiley & Sons, New York (1987).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
CAMAIONI , N., CASALBORE-MICELI , G., MARTELLI , A. et al. A novel solid state battery based on a polymer proton conductor: poly(propargyl alcohol) doped with perchloric acid. Journal of Applied Electrochemistry 27, 862–866 (1997). https://doi.org/10.1023/A:1018485131407
Issue Date:
DOI: https://doi.org/10.1023/A:1018485131407