Skip to main content
Log in

Flow visualization and modelling of a filter-press type electrochemical reactor

  • Published:
Journal of Applied Electrochemistry Aims and scope Submit manuscript

Abstract

A study of flow visualization and residence time distribution is provided in order to model the flow between two electrodes in a commercial filter-press reactor, the ElectroSynCell® from Electrocell AB. Flow visualization indicates that both axial and lateral dispersion phenomena occur and a global plug flow behaviour is observed. The flow distribution is asymmetric due to the design of the inlet system in the active zone. The flow throughout the cell is described by a dispersed plug flow model for which the mean residence time and the Pe´clet number are determined. The reaction area and the inlet system are separately analysed by locating conductimetric probes inside the electrochemical cell. The reaction area is also well described by a dispersed plug flow model, and characterized by high dispersion. The inlet system is, respectively, described by a dispersed plug flow model and by a cascade of continuous stirred tank reactors. The high number of reactors in the cascade denotes a quasi plug flow behaviour. The results are confirmed by two cascades of continuously stirred tank reactors in series. The dispersion coefficients obtained throughout the reaction area of the cell are not constant. This shows that the flow is not well established at the entrance of the reaction zone and depends on the entrance conditions.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Electrocell AB, PO Box 34, S 18400, Akesberga, Sweden.

  2. L. Carlsson, B. Sandegren, D. Simonsson and M. Rihovsky, J. Electrochem. Soc. 130 (1983) 342.

    Google Scholar 

  3. A. Montillet, J. Legrand, J. Comiti, M. M. Letord and J. M. Jud, `Electrochemical Engineering and Energy', Plenum Press (1994), p.81.

  4. A. Montillet, J. Comiti and J. Legrand, J. Appl. Electrochem. 23 (1993) 1045.

    Google Scholar 

  5. A. Montillet, PhD. thesis, Université de Nantes, Ecole Centrale de Nantes, France (1992).

  6. J. H. Gerard, J. Fluid. Mech. 46 (1971) 43.

    Google Scholar 

  7. P. Legentilhomme, J. Legrand and J. Comiti, J. Appl. Electrochem. 19 (1989) 263.

    Google Scholar 

  8. P. Feron and G. S. Solt, Desalination 84 (1991) 137.

    Google Scholar 

  9. M. A. Fahim and N. Wakao, Chem. Eng. J. 25 (1982) 1.

    Google Scholar 

  10. N. Wakao and S. Kaguei, `Heat transfer in packed beds', Gordon & Breach, New York (1992).

    Google Scholar 

  11. W. C. Clements, Chem. Eng. Soc. 24 (1992) 957.

    Google Scholar 

  12. G. S. G. Beveridge and R. S. Schechter, `Optimization: Theory and Practice', McGraw-Hill, New York (1992).

    Google Scholar 

  13. P. Trinidad and F. C. Walsh, Electrochim. Acta 41 (1996) 493.

    Google Scholar 

  14. C. J. Brown, D. Pletcher, F.C. Walsh, J. K. Hammond and D. Robinson, J. Appl. Electrochem. 22 (1992) 613.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

BENGOA, C., MONTILLET , A., LEGENTILHOMME , P. et al. Flow visualization and modelling of a filter-press type electrochemical reactor. Journal of Applied Electrochemistry 27, 1313–1322 (1997). https://doi.org/10.1023/A:1018456609059

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1023/A:1018456609059

Keywords

Navigation