Abstract
The history of the developments and applications of standard reference materials (SRMs) in the former Soviet Union and Russia (late in the 19th and early in the 20th centuries), as well as in other countries, were considered. Data on the organization of research, on methodological concepts of the SRM quality assurance, and on the optimization of a triad—normative documents (standards) regulating the composition of materials (substances), standards for the procedures of quantitative analysis, and required SRMs—were given. Persons who primarily contributed to solving the problem under discussion were mentioned. As immediate tasks of importance, the development of international SRMs, the intercomparison of national SRMs for determining their interchangeability, and the optimization of the assortment (number of types) of SRMs indispensable and sufficient (irredundant) for the analysis of particular samples were considered.
Similar content being viewed by others
REFERENCES
Shaevich, A.B., Izmerenie i normirovanie khimicheskogo sostava veshchestv (Measurement and Regulation of Chemical Composition of Substances), Moscow: Izd. Standartov, 1971.
Shaevich, A.B., Standartnye obraztsy dlya analiticheskikh tselei (Standard Samples for Analytical Purposes), Moscow: Khimiya, 1987.
Namias, R., Stahl und Eisen, 1890, no. 12.
Über die Arbeiten der Ausschüsse zun Herstelung Internationallen Leitpoben für Eisen, 1884, no. 10.
Vossauer, A., Chem. Zeitung, 1889, p. 695.
Hampe, F., Stahl und Eisen, 1892, no. 3.
Langlei, J.W., Stahl und Eisen, 1891, no. 1.
Romanov, L., Ural'skoe gornoe obozrenie, 1901, nos. 10, 11.
Shadrin, N., Ural'skoe gornoe obozrenie, 1901, no. 14.
Die Erste Conferenz der Uralchemiker, Stahl und Eisen, 1902, p. 441.
Bericht über die Arbeiten der Komission zur Einführung Einheitlichen Untersuchungsmetoden, Stahl und Eisen, 1891, no. 5.
Kling, A., Rev. Metall., 1924, no. 4.
Echantillions Types D'Acier, IRSID, 1968.
Lipin, S.V., Tr. Vses. Nauchno-Issled. Instit. Metrol., 1947, issue 5(60), p. 65.
Solov'ev, V.M., Zavod. Lab., 1939, vol. 7, no. 2, p. 202.
Solov'ev, V.M.,Kuklin, N.M.,Stepin, V.V., andTsekhanskii, M.I., Tr. Vses. Nauchno-Issled. Instit. Stand. Obraztsov, 1965, p. 3.
Shaevich, A.B., Zavod. Lab., 1953, vol. 19, no. 10, p. 1189; 1995, vol. 21, no. 3, p. 330.
Alimarin, I.P.,Shaevich, A.B., andBogoraz, A.E., Sots. Industriya, 1969, no. 26, p. 2.
Oleinik, B.N.,Simin, A.I., andShaevich, A.B., Izmer. Tekh., 1967, no. 11, p. 199.
Shaevich, A.B.,Babushkina, Z.N., andShpakova, S.P., Med. Gazeta, 1972, no. 96, p. 3.
Shaevich, A.B.,Simin, A.I., andSemakov, B.V., Izmer. Tekh., 1968, no. 9, p. 22.
Shaevich, A.B., Tr. Metrol. Inst. SSSR, 1974, issue 175 (235), p. 4.
Shaevich, A.B., Izmer. Tekh., 1969, no. 9, p. 65; 1971, no. 6, p. 15.
Shaevich, A.B., Materialy XV konferentsii Evropeiskoi organizatsii po kontrolyu kachestva. Sessiya I (Proc. XV Conf. of European Organization on Quality Assurance, Session 1), Moscow: Izd. Standartov, 1972, p. 123.
Shaevich, A.B., Analiticheskaya sluzhba kak sistema (Analytical Service As a System), Moscow: Khimiya, 1981.
Shaevich, A.B., CRC Crit. Rev. Anal. Chem., 1985, vol. 15, issue 3, p. 223.
Shaevich, A.B., Fresenius Z. Anal. Chem., 1989, vol. 335, no. 9, p. 9.
Shaevich, A.B., Prib. Sist. Upr., 1975, no. 6, p. 25.
Shaevich, A.B., Zh. Anal. Khim., 1979, vol. 34, issue 7, p. 1429.
Shaevich, A.B., Zh. Anal. Khim., 1992, vol. 47, no. 1, pp. 65, 168.
Shaevich, A.B. andSilin, A.V., Stand. Kach., 1967, no. 12, p. 5; 1968, no. 4, p. 27; 1971, no. 6, p. 25.
Paneva, V.I.,Petrova, G.A., andShaevich, A.B., Izmer. Tekh., 1975, no. 11, p. 18.
Semenko, N.G.,Lakhov, V.M., andDus'e, S.Yu., Izmer. Tekh., 1983, no. 4, p. 20.
Pliner, Yu.L.,Stepin, V.V., andUstinova, V.I., Standartnye obraztsy metallurgicheskikh materialov (Reference Materials of Metallurgical Samples), Moscow: Metallurgiya, 1976.
Arzamastsev, A.P. andSenov, P.L., Standartnye obraztsy lekarstvennykh veshchestv (Reference Materials of Medicinal Substances), Moscow: Meditsina, 1978.
Pliner, Yu.P.,Svechnikova, E.A., andOgurtsov, V.M., Upravlenie kachestvom khimicheskogo analiza v metallurgii (Monitoring of Quality of Chemical Analysis in Metallurgy), Moscow: Metallurgiya, 1979.
Gavrishin, A.I., Otsenka i kontrol' kachestva tekhnicheskoi informatsii (Estimation and Quality Assurance of Technological Information), Moscow: Nedra, 1980.
Pliner, Yu.L.,Sokolova, I.V.,Vasilevskaya, L.V., et al., Metrologicheskoe obespechenie kontrolya sostava materialov (spravochnik) (Metrological Support of Control of the Composition of Materials. Handbook), Moscow: Metallurgiya, 1981.
Kaplan, B.Ya.,Maiorov, I.A., andFilimonov, L.N., Metody analiticheskogo kontrolya v tsvetnoi metallurgii. Chasti 1 i 2 (Methods of Analytical Control in Non-Ferrous Metallurgy. Parts 1, 2), Moscow: GIREDMET, 1984.
Semenko, N.G.,Paneva, V.I., andLakhov, V.M., Standartnye obraztsy v sisteme obespecheniya edinstva izmerenii (Reference Matrials in a System of Traceability of Measurements), Moscow: Izd. Standartov, 1990.
Buitash, P.,Kuz'min, N.M., andLeistner, L., Obespechenie kachestva rezul'tatov khimicheskogo analiza (Quality Assurance of Results of Chemical Analysis), Moscow: Nauka, 1993.
Shaevich, A.B., Gosudarstvennaya sluzhba standartnykh obraztsov. Obzornaya informatsiya. Seriya “Metrologicheskoe obespechenie izmerenii” (State Service of Reference Materials. Review Information. Ser. Metrological Support of Measurements), Moscow: Izd. Standartov, 1976.
Shaevich, A.B., Zavod. Lab., 1987, vol. 53, no. 6, p. 4.
Shaevich, A.B. andSemenko, N.G., Zavod. Lab., 1978, vol. 44, no. 2, p. 241.
Alimov, Yu.I. andShaevich, A.B., Zh. Anal. Khim., 1988, vol. 43, no. 10, p. 1893.
Aleksandrov, Yu.I., Izmer. Tekh., 1991, no. 12, p. 62.
Shaevich, A.B. andPliner, Yu.L., Izmer. Tekh., 1973, no. 12, p. 63.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Shaevich, A.B. Standard Reference Materials in the Former Soviet Union and Russia: Historical Aspects. Journal of Analytical Chemistry 56, 689–695 (2001). https://doi.org/10.1023/A:1016712910291
Issue Date:
DOI: https://doi.org/10.1023/A:1016712910291