Advertisement

Atomic Energy

, Volume 92, Issue 4, pp 301–305 | Cite as

Temperature Standard for VVÉR-440

  • S. Shtants
  • M. Slanina
Article
  • 20 Downloads

Abstract

The properties and advantages of using a measurement system intended for monitoring the coolant temperature at the exit and entrance of the reactor are compared. The error in measuring the coolant temperature is 0.18°C and the heating 0.14°C, respectively, with probability 0.95. The temperature sensors in the measurement system are metrologically coupled with high-order standards. The measurement error is monitored in each measurement cycle of the system. The system is intended for metrological support for design measurements of the reactor temperature and has been installed in 12 units of nuclear power plants with VVÉR-440 reactors in Slovakia, Czechoslovakia, and Bulgaria.

Keywords

Measurement Error Power Plant Reactor Temperature Measurement System Nuclear Power Plant 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Copyright information

© Plenum Publishing Corporation 2002

Authors and Affiliations

  • S. Shtants
    • 1
  • M. Slanina
    • 1
  1. 1.VUIE, Trnava, A. O. – Engineering-Design and Research OrganizationRussian

Personalised recommendations