Advertisement

Numerical modeling of fracture coalescence in a model rock material

  • Antonio Bobet
  • Herbert H. Einstein
Article

Abstract

The crack pattern, as well as crack initiation, -propagation and -coalescence observed in experiments on gypsum specimens with pre-existing fractures in uniaxial, biaxial, and tensile loading are satisfactorily predicted with the numerical model presented in this paper. This was achieved with a new stress-based crack initiation criterion which is incorporated in FROCK, a Hybridized Indirect Boundary Element method first developed by Chan et al. (1990). The basic formulation of FROCK is described, and the code verified for both open and closed pre-existing fractures either with only friction or with friction and cohesion. The new initiation criterion requires only three material properties: σcrit, the critical strength of the material in tension; τcrit, the critical strength of the material in shear; r0, the size of the plastic zone. The three parameters can be determined with the results from only one test. Predictions using this model are compared with experiments on gypsum specimens with pre-existing fractures loaded in uniaxial and biaxial compression performed by the authors. Specifically, wing crack and shear crack initiation, crack propagation, coalescence stress and -type as well as the crack pattern up to coalescence can be modeled. The model can also duplicate experimental results in compression and tension obtained by other researchers. These results show that stress-based criteria can be effectively used in modeling crack initiation and crack coalescence.

Displacement discontinuity method brittle material crack initiation criterion crack coalescence modeling uniaxial compression biaxial compression 

References

  1. ABAQUS. Finite element program, from Hibbit, Karlson & Sorensen, Inc. 1080 Main Street, Pawtucket, RI, USA.Google Scholar
  2. Bathe, K. (1982). Finite Element Procedures in Engineering Analysis. Prentice-Hall, Inc., Englewood Cliffs, New Jersey, USA.zbMATHGoogle Scholar
  3. Bobet, A. and Einstein, H.H. (1996). Fracture coalescence in rock material under uniaxial and biaxial loading. Proceedings of the 2nd North American Rock Mechanics Symposium: NARMS'96, Montreal, 1603-1609.Google Scholar
  4. Bobet, A. (1997). Fracture Coalescence in Rock Materials: Experimental Observations and Numerical Predictions. Sc.D. Thesis, Massachusetts Institute of Technology, Cambridge, Massachusetts.Google Scholar
  5. Bobet, A. and Einstein, H.H. (1998). Fracture coalescence in rock-type materials under uniaxial and biaxial compression. International Journal of Rock Mechanics, Min. Sci. and Geomechanics Abstract 35(7), 863-889.CrossRefGoogle Scholar
  6. Bocca, P., Carpinteri, A. and Valente, S. (1990). Size effects in the mixed mode crack propagation: softening and snap-back analysis. Engineering Fracture Mechanics 35, 159-170.CrossRefGoogle Scholar
  7. Chan, H.C.M., Li, V. and Einstein, H.H. (1990). A hybridized displacement discontinuity and indirect boundary element method to model fracture propagation. International Journal of Fracture 45, 263-282.CrossRefGoogle Scholar
  8. Crouch, S.L. (1976). Solution of plain elastic problems by the displacement discontinuity method. International Journal of Numerical Methods in Engineering 10, 301-343.zbMATHMathSciNetCrossRefGoogle Scholar
  9. Einstein, H.H., Nelson, R.A., Barton, R.W. and Hirschfeld, R.C. (1969). Model Studies of Jointed Rock Behavior. Proc. 11th U.S. Symposium on Rock Mechanics, 83-103.Google Scholar
  10. Erdogan, F. and Sih, G.C. (1963). On the crack extension in plates under loading and transverse shear. Journal of Basic Engineering 85, 519-527.Google Scholar
  11. Griffith, A.A. (1921). The phenomenon of rupture and flow in solids. Philosophical Transactions of the Royal Society of London Series A 221, 163-198.ADSGoogle Scholar
  12. Ingraffea, A.R., Heuze, F.E., Ko, H. and Gerstle, K. (1977). An analysis of discrete fracture propagation in rock loaded in compression. Proceedings of the 18th. U.S. Symposium on Rock Mechanics, Keystone, Colorado, 2A4-1-2A4-7.Google Scholar
  13. Ingraffea, R.A. and Manu, C. (1984). Stress intensity factor computation in three dimensions with quarter point elements. International Journal of Numerical Methods in Engineering 15, 1427-1445.MathSciNetCrossRefGoogle Scholar
  14. Maji, A.K. and Wang, J.L. (1992). Experimental study of fracture processes in rock. Rock Mechanics and Rock Engineering 25, 25-47.CrossRefADSGoogle Scholar
  15. Maugis, D. (1992). Stresses and displacements around cracks and elliptical cavities: exact solutions. Engineering Fracture Mechanics 43(2), 217-255.CrossRefADSGoogle Scholar
  16. Olson, J.E. and Pollard, D.D. (1988). Inferring stress states from detailed joint geometry. Proceedings: 29th US Symposium on Rock Mechanics, A.A. Balkema, Rotterdam, 159-167.Google Scholar
  17. Olson, J.E. and Pollard, D.D. (1989). Inferring paleostresses from natural fracture patterns: A new method. Geology 17, 345-348.CrossRefADSGoogle Scholar
  18. Olson, J.E. and Pollard, D.D. (1991). The initiation of en échelon veins. Journal of Structural Geology 13(5), 595-608.CrossRefADSGoogle Scholar
  19. Pollard, D.D., Zeller, S., Olson, J. and Thomas, A. (1990). Understanding the process of jointing in brittle rock masses. Proceedings: 31st US Symposium on Rock Mechanics, A.A. Balkema, Rotterdam, 447-454.Google Scholar
  20. Reyes, O. and Einstein, H.H. (1991). Failure mechanism of fractured rock — A fracture coalescence model. Proceedings 7th International Congress of Rock Mechanics 1, 333-340.Google Scholar
  21. Scavia, C. (1995). A method for the study of crack propagation in rock structures. Géotechnique 45(3), 447-463.CrossRefGoogle Scholar
  22. Shen, B. and Stephansson, O. (1994). Modification of the G-criterion for crack propagation subjected to compression. Engineering Fracture Mechanics 47(2), 177-189.CrossRefGoogle Scholar
  23. Sih, G.C. (1974). Strain-energy density factor applied to mixed mode crack problems. International Journal of Fracture 10(3), 305-321.CrossRefGoogle Scholar
  24. Takeuchi, K. (1991). Mixed-Mode Fracture Initiation in Granular Brittle Materials. M.S. Thesis, Massachusetts Institute of Technology, Cambridge.Google Scholar
  25. Tasdemir, M.A., Maji, A.K. and Shah, S.P. (1990). Crack propagation in concrete under compression. Journal of Engineering Mechanics 116(5), 1058-1076.Google Scholar
  26. Whittaker, B.N. Singh, R.N. and Sun, G. (1992). Rock Fracture Mechanics: Principles, Design and Applications. Elsevier Science Publishers, Amsterdam.Google Scholar
  27. Xu, C. and Fowell, R.J. (1994). Stress intensity factors evaluation for cracked chevron notched Brazilian disk specimens. International Journal of Rock Mechanics, Min. Sci. and Geomechanics Abstract 31(2), 157-162.CrossRefGoogle Scholar
  28. Zeller, S.S. and Pollard, D.D. (1992). Boundary conditions for rock fracture analysis using the boundary element method. Journal of Geophysical Research 97(B2), 1991-1997.ADSGoogle Scholar

Copyright information

© Kluwer Academic Publishers 1998

Authors and Affiliations

  • Antonio Bobet
  • Herbert H. Einstein

There are no affiliations available

Personalised recommendations