Abstract
Phosphoric acid fuel cells (PAFCs) had been developed for cogeneration plants based on natural gas as fuel. Operation of phosphoric acid fuel cells on hydrogen requires recycling of unspent hydrogen from the anode exhaust for obtaining highest efficiency. But recycling rates are limited due to accumulation of inert gases. Theoretical calculations and experimental data on optimizing this operation mode with respect to highest electrical energy efficiency are compared. The results are verified in a 100 cm2 PAFC unit. From the data obtained with a Fuji 2 kW PAFC, the performance of large units with hydrogen recycling is predicted.
Similar content being viewed by others
References
F.A. Brammer, M. Kah and H. Wendt, Chem. Ing. Tech. 69 (1997) 1457–62.
F.A. Brammer, P. Biehle and M. Steiner, VDI-Ber (Germany) 1383 (1988) 83–105.
K. Kordesch and S. Simader, Fuel cells and their applications, VCH-Verlag, Weinheim, 1996.
O. Weinmann and G. Newi, VDI-Ber (Germany) 1383 (1998) 129–44.
J. Scholta, Dissertation, TH Darmstadt, Darmstadt (1993).
J. Scholta and B. Rohland, in Proc. 7th Canadian Hydrogen Workshop, 4–6 June 1995, edited by S.K. Metha, T.K. Bose, Canadian Hydrogen Association, Toronto, Canada (1998), pp. 161–9.
W. Vogel, J. Lundquist, P. Ross and P. Stonehart, Electrochim. Acta 20 (1975) 79–93.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Scholta, J., Rohland, B. & Wendt, H. Hydrogen fired PAFCs: an experimental investigation into the optimal utilization of impure, recycled hydrogen. Journal of Applied Electrochemistry 30, 323–331 (2000). https://doi.org/10.1023/A:1003991420781
Issue Date:
DOI: https://doi.org/10.1023/A:1003991420781