Abstract
Debonding processes in model composites under tensile deformation were investigated by acoustic emission analysis. The composites were prepared from epoxy and polyethylene matrix filled with glass beads of various sizes and with different coatings. The detected acoustic emission signals were identified as debonding processes at the filler–matrix interphase, and are discussed as a rupture process on the basis of the Weibull probability distribution function. For the model composites, the effect of the filler size is discussed using a theory based on Griffith’s criterion of rupture.
Similar content being viewed by others
References
A. V. ZHUK, V. G. KNUNYANTS, V. G. OSHMYAN and V. A. TOPOLKARAEV, J. Mater. Sci. 28 (1993) 4595.
A. A. GRIFFITH, Trans. R. Soc. Lond. A221 (1920) 163.
A. N. GENT, J. Mater. Sci. 15 (1980) 2884.
A. N. GENT and BYOUNGKYEU PARK, ibid. 19 (1984) 1947.
W. WEIBULL, J. Appl. Mech. 18 (1951) 293.
S. S. MINKO, I. LUZINOV, A. VORONOV and R. MUSIY, Ukrain. Chemich. Z. 60 (1994) 727.
S. S. MINKO, I. LUZINOV, A. VORONOV and V. TOKAREV, “Polymer at Interphase, Synthesis, Adsorption, Conformation and Reactivity”, a report. State University Lvivska Polytechnika (1994).
R. KRAUS, A. ZHUK, I. LUZINOV, S. MINKO and W. WILKE, in “ECCM CTS2 2nd European Conference on Composite Materials, Composite Testing and Standardisation”, Hamburg edited by P. J. Hogg, K. Schulta and H. Wittich (Woodhead, Cambridge, 1994).
L. LORENZO and H. T. HAHN, J. Acoust. Emission 5 (1986) 15.
M. FAUDREE, E. BAER, A. HILTNER and J. COLLISTER, J. Compos. Mater. 22 (1988) 1170.
S. SHIROUZU, S. SHICHIJYO, S. TAKI, K. MATSUSHIGE, K. TAKAHASHI and T. TAKEMURA, Polym. J. 16 (1984) 223.
M. BRATRICH, B. HEISE, R. KRAUS, G. VOLSWINKLER, W. WILKE, G. BODOR and A. KALLÓ, Müanyag és Gumi 28 (1991) 273.
A. PAYER, Doctoral thesis, University of Ulm, in preparation (1997).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
KRAUS, R., WILKE, W., ZHUK, A. et al. Investigation of debonding processes in particle-filled polymer materials by acoustic emission: Part I Acoustic emission and debonding stress. Journal of Materials Science 32, 4397–4403 (1997). https://doi.org/10.1023/A:1018684225784
Issue Date:
DOI: https://doi.org/10.1023/A:1018684225784