Geotechnical & Geological Engineering

, Volume 18, Issue 3, pp 175–192 | Cite as

Floor failure analysis at a longwall mining face based on the multiple sliding block model

  • J. A. Nemcik
  • B. Indraratna
  • W. Gale


This paper presents an analytical model of a floor failure at a longwall coal mining face based on the multiple sliding block model. During longwall mining, stresses and displacements of strata are constantly changing. High stress concentrations at the coal face can exceed the rock strength and initiate fractures in the strata that can, under unfavourable conditions, lead to large floor displacements and disruption of mining operations. Underground observations of the rock floor and the computational modelling of the longwall face indicate that two types of fracture dominate floor failure. Extensive lateral fracturing often develops along the numerous weak bedding planes that are typically present in the sedimentary strata while sub-vertical fractures form in response to changing stress abutments ahead of the longwall coal face. The fractures that initially develop ahead of the longwall face are subject to a “secondary” movement when exposed ahead of the longwall supports. In response to the stress relief as the coal is mined from above, strata move towards the opening and bending of the floor occurs. If fractures in the floor exist, the floor blocks will displace in response to the floor movement and interact at the fractured surfaces. This analysis attempts to explain how the stress distribution develops within the broken floor during an active movement of floor strata leading to high stress concentrations at the floor level. The analytical formulation in this paper is supplemented by numerical modelling, and results are presented to verify that the analytical solutions are in accordance with the numerical predictions.

coal mining floor failure fracture planes numerical analysis sliding block model 


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. Brady, B.H.G and Brown, E.T. (1985) Rock Mechanics for Underground Mining, Second Edition, Chapman and Hale, London, p. 527.Google Scholar
  2. Gale, W.J. and Nemcik, J.A. (1998) Prediction of strata caving characteristics and its impact on longwall operation, COAL98 Conference, University of Wollongong Press, pp. 156–166.Google Scholar
  3. Hoek E. and Bray J.W. (1981) Rock Slope Engineering, Revised 3rd Edn, p. 357.Google Scholar
  4. Itasca, (1993) Universal Distinct Element Code, UDEC User Manual, Version 2.0, Itasca Consulting Group Inc., Minneapolis, Minnesota, USA.Google Scholar
  5. Karabin, G. and Evanto, M. (1999) Experience with the Boundary-Element Method of Numerical Modelling to resolve Complex Ground Control Problems., Proceedings of the Second International Workshop on Coal Pillar Mechanics and design, pp. 89–113.Google Scholar
  6. Kelly, M., Gale, W.J., Hatherly, P., Basulu, R. and Luo, X. (1998) Combining modern assess-ment methods to improve understanding of longwall geomechanics, COAL98 Conference, University of Wollongong Press, pp 52–535.Google Scholar
  7. Nemcik, J.A., Indraratna, B., Aziz, N. and Gale, W.J. (1998) Numerical modelling of £oor deformation mode at longwall face, International Conference on Geomechanics/Ground Control in Mining and Underground Construction, University of Wollongong Press, pp. 967–978.Google Scholar
  8. Nguyen, V. and Welsh, T. (1981) Characteristics of spoil pile failures in a strip coal mine in tertiary and permian sediments. Proceedings of the International Symposiumof Weak Rock, Tokyo, pp 1451–1460.Google Scholar
  9. Peng, S. and Chiang, H. (1985) Longwall Mining, A Wiley-Interscience Publication, John Wiley and Sons, New York, p. 708Google Scholar
  10. Terzaghi, K. and Peck, R. (1967) Soi lMechanics in Engineering Practice, 2nd Edn, John Wiley and Sons, Inc. New York, p. 729.Google Scholar

Copyright information

© Kluwer Academic Publishers 2000

Authors and Affiliations

  • J. A. Nemcik
    • 1
  • B. Indraratna
    • 2
  • W. Gale
    • 3
  1. 1.Strata Control Technology, Wollongong and Doctoral CandidateUniversity of WollongongAustralia
  2. 2.Civil and Mining DepartmentUniversity of WollongongAustralia
  3. 3.Managing Director of Strata Control TechnologyWollongongAustralia

Personalised recommendations