High Temperature

, Volume 41, Issue 3, pp 404–407 | Cite as

The Optimal Control by Heat Flux in Solidifying Metal in a Multiphase State for the Purpose of Improving the Characteristics of the Solid Phase

  • V. K. Tolstykh
  • N. A. Volodin
  • V. E. Chernonog
Article
  • 13 Downloads

Abstract

This paper deals with the problem of optimal cooling of a multiphase, continuously cast vertical cylindrical metal ingot in order to improve the characteristics of the solid phase. For the purpose of determining the optimal values of heat removal, a direct extreme approach is applied based on calculating the gradient of the ingot quality criterion. The criterion includes the effect of thermal stresses and of the degree of dispersity of dendritic structure on the quality of the cooling ingot.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

REFERENCES

  1. 1.
    Efimov, V.A., Razlivka i kristallizatsiya stali (Casting and Crystallization of Steel), Moscow: Metallurgiya, 1976.Google Scholar
  2. 2.
    Manokhin, A.I., Urazaev, R.A., Matevosyan, E.P., et al., Metalloved. Term. Obrab. Met., 1972, no. 11, p. 56.Google Scholar
  3. 3.
    Sobolev, V.V. and Trefilov, P.M., Teplofizika zatverde-vaniya metalla pri nepreryvnom lit'e (The Thermophys-ics of Solidification of Metals in Continuous Casting), Moscow: Metallurgiya, 1988.Google Scholar
  4. 4.
    Tolstykh, V.K., Pryamoi ekstremal'nyi podkhod dlya sistem s raspredelennymi parametrami (Direct Extremal Approach for Systems with Distributed Parameters), Donetsk: Yugo-Vostok, 1997.Google Scholar
  5. 5.
    Ogurtsov, A.P., Nedopekin, F.V., Tolstykh, V.K., and Volodin, N.A., Pryamaya optimizatsiya teplofizicheskikh protsessov (Direct Optimization of Thermophysical Pro-cesses), Donetsk: Yugo-Vostok, 1997.Google Scholar
  6. 6.
    Tolstykh, V.K., Abstracts of Papers, Tezisy 1-i Mezhdun-arodnoi konferentsii "Chislennye metody v gidravlike i gidrodinamike"(1st Int. Conf. on Numerical Methods in Hydraulics and Hydrodynamics), 1994, p. 112.Google Scholar
  7. 7.
    Dyudkin, D.A., Kachestvo nepreryvnolitoi stal'noi zag-otovki (The Quality of Continuously Cast Steel Blank), Kiev: Tekhnika, 1988.Google Scholar
  8. 8.
    Tolstykh, V.K. and Volodin, N.A., Optimal Control by Heat Flow in Continuous Casting Steel, Proc. Symp. on Operations Research, Braunschweig, 1996, p. 480.Google Scholar

Copyright information

© MAIK “Nauka/Interperiodica” 2003

Authors and Affiliations

  • V. K. Tolstykh
    • 1
  • N. A. Volodin
    • 1
  • V. E. Chernonog
    • 1
  1. 1.Donetsk National UniversityDonetskUkraine

Personalised recommendations