Advertisement

Journal of Materials Science

, Volume 32, Issue 8, pp 2107–2113 | Cite as

Preparation of pure superconductors from polymer chelate YBa2Cu3O7-x precursors using poly[(N, N-dicarboxymethyl)allylamine]

  • K NAKA
  • M YOSHIMOTO
  • K HAGIHARA
  • A OHKI
  • S MAEDA
Article

Abstract

Bulk Yba2Cu3O7-x (YBCO) was prepared by a polymer chelate precursor method using poly[(N,N-dicarboxymethyl)allylamine] (PDAA) as a chelating polymer. An aqueous solution containing PDAA and 1/2 or 1/4 equivalent molar amount of metal nitrates (Y : Ba : Cu=1 : 2 : 3) to the repeating unit of PDAA at pH 8 was poured into ethanol to precipitate the polymer-metal chelate precursor. The precursor containing 1/2 equivalent molar amount of metal ions was calcined at 880°C for 10 h, sintered at 920°C for 2 h, and annealed at 600°C for 5 h. The product exhibited a pure superconducting orthorhombic phase. However, the precursor containing 1/4 equivalent molar amount of metal ions gave a mixture of orthorhombic and tetragonal phases under the same conditions. The influence of a purification process for PDAA on the preparation of YBCO was also examined. The electrical resistance and susceptibility of the YBCO sample prepared by optimum conditions were measured. The sintered sample showed superconductivity with Tc (onset) at 93 K and Tc (end) at 91 K. The narrow superconducting transition demonstrated here is attributed to the high purity and homogeneity of the sample prepared from optimized polymer chelate precursor technique.

Keywords

Metal Chelate Sintered Sample Molar Amount Metal Nitrate Allylamine 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    M. H. KAYSER, B. BORGLUM, G. ANTONY, S. G. SHYU and R. C. BUCHANAN, Mater. Res. Soc. Symp. Proc. 99 (1988) 159.CrossRefGoogle Scholar
  2. 2.
    Y. G. METLINE and Y. D. TRETYAKOV, J. Mater. Chem. 4 (1994) 1659.CrossRefGoogle Scholar
  3. 3.
    H. KOZUKA, T. UMEDA, J. JIN, T. MONDE and S. SAKKA, Bull. Inst. Chem. Res., Kyoto Univ. 66 (1988) 80.Google Scholar
  4. 4.
    M. KAKIHANA, L. BÖRJESSON, S. ERIKSSON and P. SVEDINDTH, J. Appl. Phys. 69 (1991) 867.CrossRefGoogle Scholar
  5. 5.
    M. KAKIHANA, M. YOSHIMURA, H. MAZAKI, H. YASUOKA and L. BÖRJESSON, J. Appl. Phys. 71 (1992) 3904.CrossRefGoogle Scholar
  6. 6.
    S. MAEDA, Y. TSURUSAKI, Y. TACHIYAMA, K. NAKA, A. OHKI, T. OHGUSHI and T. TAKESHITA, J. Polym. Sci. Part A: Polym. Chem. 32 (1994) 1729.CrossRefGoogle Scholar
  7. 7.
    K. NAKA, Y. TACHIYAMA, A. OHKI and S. MAEDA, J. Polym. Sci. Part A: Polym. Chem., 34 (1996) 1003.CrossRefGoogle Scholar
  8. 8.
    J. C. W. CHIEN, B. M. GONG, Y. S. YANG, J. M. MADSEN, W. M. TIERNAN and R. B. HALLOCK, Physica C 165 (1990) 279.CrossRefGoogle Scholar
  9. 9.
    J. C. W. CHIEN, B. M. GONG, X. MU, and Y. YANG, J. Polym. Sci. Part A: Polym. Chem. 28 (1990) 1999.CrossRefGoogle Scholar
  10. 10.
    I. LAMPE, M. WASCHE and H. J. LORKOWSKI, Acta Polym. 44 (1993) 148.CrossRefGoogle Scholar
  11. 11.
    J. D. TWEED, J. C. McDOWELL and N. M. D. BROWN, J. Mater. Sci. Lett. 12 (1993) 461.CrossRefGoogle Scholar
  12. 12.
    K. NAKA, Y. TACHIYAMA, K. HAGIHARA, Y. TANAKA, A. OHKI and S. MAEDA, Polym. Bull. 35 (1995) 659.CrossRefGoogle Scholar

Copyright information

© Chapman and Hall 1997

Authors and Affiliations

  • K NAKA
    • 1
  • M YOSHIMOTO
    • 1
  • K HAGIHARA
    • 1
  • A OHKI
    • 1
  • S MAEDA
    • 1
  1. 1.Department of Applied Chemistry and Chemical Engineering, Faculty of EngineeringKagoshima UniversityKagoshimaJapan

Personalised recommendations