Abstract
To investigate the macro and micro behaviors of TRIP (transformation induced plasticity) steel under biaxial loading, experiment and finite element simulation were carried out for TRIP780 steel under proportional biaxial tension with displacement ratio of 1:1, 2:1, 3:1 and 4:1, respectively. The results show that cruciform specimens of TRIP780 steel fractured under proportional biaxial stretching when effective strain was about 1.5%, and fracture was always generated on the cross arm or cross links. During biaxial tension, stress and strain components in x and y directions of the center of the samples have the same nonlinear developing tendency, decreasing in one direction and increasing in another direction. Equal biaxial stretching stress state was helpful for retained austenite-martensite transformation than the other biaxial stress state. With increasing displacement ratio (DR) from 1:1 to 4:1, corresponding stress distributed unevenly on the yield ellipse from 30° to 60° in the first quadrant of stress space and corresponding retained austenite volume fraction distributed symmetrically in bow tie format.
Similar content being viewed by others
References
F. D. Fischer, G. Reisner, K. Tanaka, G. Cailletaud, T. Antretter, Int. J. Plasticity 16 (2000) 723–748.
L. Li, P. Wollants, Y. L. He, Acta Metall. Sin. 16 (2003) 457–465.
R. Zhu, S. Li, I. Karaman, R. Arroyave, T. Niendorf, H. J. Maier, Acta Mater. 60 (2012) 3022–3033.
K. S. Choi, A. Soulami, W. N. Liu, X. Sun, M. A. Khaleel, Comput. Mater. Sci. 50 (2010) 720–730.
X. Sun, A. Soulami, K. S. Choi, O. Guzman, W. Chen, Mater. Sci. Eng. A 541 (2012) 1–7.
S. Zaefferer, J. Ohlert, W. Bleck, Acta Mater. 52 (2004) 2765–2778.
J. Chiang, B. Lawrence, J. D. Boyd, A. K. Pilkey, Mater. Sci. Eng. A 528 (2011) 4516–4521.
W. J. Dan, S. H. Li, W. G. Zhang, Z. Q. Lin, Mater. Des. 29 (2008) 604–612.
A. Nasser, A. Yadav, P. Pathak, T. Altan, J. Mater. Process. Technol. 210 (2010) 429–436.
Y. T. Fu, J. Liu, J. Shi, W. Q. Cao, H. Dong, J. Iron Steel Res. Int. 20 (2013) No. 5, 50–56.
J. L. Zhao, Y. Xi, W. Shi, L. Li, J. Iron Steel Res. Int. 19 (2012) No. 4, 57–62.
Q. Furnemont, F. Lani, T. Pardoen, F. Delannay, Acta Mater. 55 (2007) 3681–3693.
S. Zhang, K. O. Findley, Acta Mater. 61 (2013) 1895–1903.
H. Ding, H. Ding, D. Song, Z. Y. Tang, P. Yang, Mater. Sci. Eng. A 528 (2011) 868–873.
H. Y. Yu, Y. K. Gao, D. J. Meng, Mater. Sci. Eng. A 441 (2006) 331–335.
W. J. Dan, W. G. Zhang, S. H. Li, Z. Q. Lin, Comput. Mater. Sci. 39 (2007) 593–599.
J. Yan, H. L. Liu, J. M. Chen, J. F. Jullien, T. Wu, Comput. Mater. Sci. 43 (2008) 646–654.
T. Bhattacharyya, S. B. Singh, S. Das, A. Haldar, D. Bhattacharjee, Mater. Sci. Eng. A 528 (2011) 2394–2400.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by National Natural Science Foundation of China (51075034)
Rights and permissions
About this article
Cite this article
Li, Hy., Zhang, Yj., Zhao, Wj. et al. Macro and Micro Behaviors of Low Alloyed TRIP780 Steel with Different Biaxial Proportional Loading. J. Iron Steel Res. Int. 22, 256–263 (2015). https://doi.org/10.1016/S1006-706X(15)60039-5
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(15)60039-5