Abstract
The precipitation behavior of V-N microalloyed steel during normalizing process was studied by physicochemical phase analysis and transmission electron microscopy (TEM). The effect of precipitation behavior on mechanical properties was investigated by theoretical calculations. The results showed that 32.9% of V(C,N) precipitates remained undissolved in the austenite during the soaking step of the normalizing process. These precipitates prevented the growth of the austenite grains. During the subsequent cooling process, the dissolved V(C,N) re-precipitated and played a role in precipitation strengthening. The undissolved V(C,N) induced intragranular ferrite nucleation and refined the ferrite grains. Consequently, compared with hot-rolled steel, the normalized steel exhibited increased grain-refining strengthening but diminished precipitation strengthening, leading to an improvement of the impact energy at the expense of about 40 MPa yield strength.
Similar content being viewed by others
References
J. G. Li, The Mechanical Theory of Pressure Vessel Design and Its Application of Standard, China Machine Press, Beijing, 2004.
D. R. Moss, Y. Z. Chen, Pressure Vessel Design Manual, China Petrochemical Press, Beijing, 2006.
C. F. Yang, Y. Q. Zhang, R. Z. Wang, Principle and Application of Vanadium-microalloyed Steel Metallurgy, Metallurgical Industry Press, Beijing, 2012.
R. Lagneborg, T. Siwecki, S. Zajac, B. Hutchinson, Scand. J. Metall. 28 (1999) No.5, 186–241.
S. F. Medina, M. Gómez, L. Rancel, Scripta Mater. 58 (2008) 1110–1113.
C.Y. Yang, Q. L. Wang, J. Iron Steel Res. Int. 15 (2008) No.2, 81–86.
T. Gladman, The Physical Metallurgy of Microalloyed Steels, Institute of Materials, London, 1997.
L. Pindor, V. Matejka, P. Kozelsky, K. Michalek, G. Gigacher, Ironmak. Steelmak. 35 (2008) 124–128.
C. F. Yang, Iron and Steel 45 (2010) No.11, 1–11.
X. P. Mao, Q. L. Chen, D.Y. Zhu, Iron and Steel 43 (2008) No. 4, 1–9.
D. Cheng, Y. Q. Zhang, C. F. Yang, Iron and Steel 43 (2008) No.6, 97–100.
E. Ubici, W. Chiapparoli, D. Cavaleri, in: 4th IAS Conference on Uses of Steel, Rosario, 2008, pp. 175–184.
Q. L.Yong, Second Phases in Structural Steels, Metallurgical Industry Press, Beijing, 2006.
G. W. Yang, X. J. Sun, Q. L. Yong, Z. D. Li, X. X. Li, J. Iron Steel Res. Int. 21 (2014) No.8, 757–764.
T. Pan, C. Zhang, Z. G. Yang, H. Takeda, J. Iron Steel Res. Int. 17 (2010) No.5, 74–78.
Z. X. Xia, C. Zhang, Z. G. Yang, Mater. Sci. Eng. A 528 (2011) 6764–6768.
T. Pan, C. F. Yang, Y. Ma, D. M. Xue, Y. Q. Zhang, J. Iron Steel Res. Int. 17 (2010) No. 3, 72–78.
S. Zajac, in: Proceedings International Symposium 2001 on Vanadium Application Technology, Beijing, 2001, pp. 62–82.
T. Gladman, Mater. Sci. Technol. 15 (1999) 30–36.
T. Gladman, Mathemat. Physic. Sci. 294 (1966) 298–309.
G. W. Yang, Z. D. Li, X. J. Sun, X. Yong, Q. L. Yong, J. Iron Steel Res. Int. 20 (2013) No. 4, 64–69.
A. Ohmori, Tetsu-to-Hagane 84 (1998) No.11, 35–41.
W. M. Gong, C. F. Yang, Y. Q. Zhang, J. Iron Steel Res. 18 (2006) No.1, 49–53.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by National Science and Technology Pillar Program of China (2011BAE25B01)
Rights and permissions
About this article
Cite this article
Pan, T., Chai, Xy., Wang, Jg. et al. Precipitation Behavior of V-N Microalloyed Steels during Normalizing. J. Iron Steel Res. Int. 22, 1037–1042 (2015). https://doi.org/10.1016/S1006-706X(15)30109-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(15)30109-6