Skip to main content
Log in

Microstructure and Mechanical Properties of Ductile Cast Iron in Lost Foam Casting with Vibration

  • Published:
Journal of Iron and Steel Research International Aims and scope Submit manuscript

Abstract

The microstructures and mechanical properties of the ductile cast iron (DI) specimens obtained by lost foam casting ( LFC) with and without vibration were investigated. The results indicate that the number of the graphite nodule increases from 175 mm−2 of the specimens produced by LFC without vibration to 334 mm−2 of the specimens produced by LFC with vibration, and the thickness of the ferrite shell increases. Meanwhile, the amount of the carbides decreases in the specimens produced by LFC with vibration and the granule structure then forms. These are mainly attributed to the “crystal shower” caused by the vibration. In addition, the tensile strength and elongation of DI specimens produced by LFC with vibration are improved due to the dispersion-strengthening of refined carbide and pearlite colony, uniform distribution of the graphite nodule, and increase of the amount of dimples and tearing edges.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. S. Shivkumar, X. Yao, M. Makhlouf, Scripta Metal. Mater. 33 (1995) 39–46.

    Article  Google Scholar 

  2. M. Mehdi Hejazi, M. Divandari, E. Taghaddos, Mater. Des. 30 (2009) 1085–1092.

    Article  Google Scholar 

  3. F. J. Li, H. F. Shen, B. C. Liu, J. Mater. Sci. Technol. 19 (2003) 395–397.

    Google Scholar 

  4. F. Taghavi, H. Saghafian, Y. H. K. Kharrazi, Mater. Des. 30 (2009) 115–121.

    Article  Google Scholar 

  5. L. Mingjun, T. Takuya, O. Naoki, M. Kenji, J. Alloys Compd. 487 (2009) 187–193.

    Article  Google Scholar 

  6. J. Jasiński, P. Podsiad, J. Jasiński, A. Bul, A. Kaczmarczyk, J. Iron Steel Res. Int. 18 (2011) sl, 541–545.

  7. J. Z. Li, J. G. Li, J. Alloys Compd. 509 (2011) 4242–4246.

    Article  Google Scholar 

  8. Z. Zhao, Z. T. Fan, X. P. Dong, B. Tang, D. Pan, J. Q. Li, China Foundry 7 (2010) 24–29.

    Google Scholar 

  9. J. Q. Li, Z. T. Fan, X. P. Dong, W. Liu, X. Y. Li. Adv. Mater. Res. 213 (2011) 5–8.

    Article  Google Scholar 

  10. J. N. Wong, M. B. Chul, J. Oh Sei, S. J. Kwon, Scripta Mater. 42 (2000) 457–463.

    Article  Google Scholar 

  11. H. R. Abedi, A. Fareghi, H. Saghafian, S. H. Kheirandish, Wear 268 (2010) 622–629.

    Article  Google Scholar 

  12. N. S. Tiedje, Mater. Sci. Technol. 26 (2010) 505–514.

    Article  Google Scholar 

  13. J. Campbell, Int. Metal. Rev. 26 (1981) 71–108.

    Google Scholar 

  14. J. V. Dawson, Modern Cast Iron 2 (1981) 53–57.

    Google Scholar 

  15. N. Ridley, Metal. Trans. A 15 (1984) 1019–1036.

    Article  Google Scholar 

  16. K. Edalati, F. Akhlaghi, M. Nili-Ahmadabadi, J. Mater. Process. Technol. 160 (2005) 183–187.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Bo-tao Xiao or Zi-tian Fan.

Additional information

Foundation Item: Item Sponsored by National High Technology Research and Development Program (863 Program) of China (2007AA03Z113)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Xiao, Bt., Fan, Zt., Jiang, Wm. et al. Microstructure and Mechanical Properties of Ductile Cast Iron in Lost Foam Casting with Vibration. J. Iron Steel Res. Int. 21, 1049–1054 (2014). https://doi.org/10.1016/S1006-706X(14)60182-5

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1016/S1006-706X(14)60182-5

Key words

Navigation