Abstract
Combined with the parameters of the production process of a steel factory, numerical simulations for a new ladle from preheating to turnover are conducted using the finite element analysis system software (ANSYS). The measured data proved that the simulated results are reliable. The effects of preheating time, thermal cycling times, and empty package time on steel temperature are calculated, an ideal preheating time is provided, besides, based on the analysis of a single factor and use the nonlinear analysis method, a steel temperature compensating model with diversified coupling factors is proposed, with the largest error of the present coupling model at 1.462 °C, and the errors between actual and target steel temperature in tundish after the model is applied to practical production are basically controlled within ± 6 °C, which can meet the accuracy of the manufacturer and has a practical guiding significance for the production in steelmaking workshops.
Similar content being viewed by others
References
HUANG Hong-bin, et al. Simulation of Ladle Temperature Court and Calculation of Store Efficiency [J]. Journal of Wuhan University of Science and Technology: Natural Science, 2010, 33(1): 28.
Taddeo M, Chan W. Analysis of the Relationship Between Shell Temperature and Liquid Steel Temperature Loss on Casting Ladles [J]. SEAIS I Q, 2008, 37(4): 22.
YANG Zhi-li, ZHU Guang-jun, CHANG Chang-zhi. Finite Element Simulation of Stable State Temperature Field of Ladle [J]. Special Steel, 2007, 28(3): 41.
WANG Zhi-gang, LI Nan, KONG Jian-yi, et al. Numerical Simulation of Temperature and Stress Field of Ladle Lining on the Bottom [J]. Energy of Metallurgy, 2004, 23(4): 16.
WU Xiao-dong, LIU Qing, XU An-jun, et al. Research on the Heat Turnover of 300 t Ladle in Bao Steel Industry [J]. Journal of University of Science and Technology Beijing, 2001, 23(5): 418.
Vasile P, Ana Josan, Lucia Vilceanu. Mathematical Modelling of Thermal Stratification Phenomena Steel Ladles [J]. Journal of Engineering, 2009, 3: 390.
Dorcak L, Terpak J. Monitoring and Prediction of the Liquid Steel Temperature in the Ladle and Tundish [J]. Metalurgija, 2006, 45(2): 93.
LIU Zhan-zeng, JIANG Yang-hu, GUO Hong-zhi. Research on Numerical Simulation of Ladle Conduction in the Steel-Making Plant [J]. Wu gang Technology, 2007, 45(4): 20.
Andre Zimmer, Alvaro Niedersberg Correia Lima, et al. Heat Transfer in Steelmaking Ladle. Jounal of Iron and Steel Research [J]. International, 2008, 15(3): 11.
HE Dong-feng, XU An-jun, WU Peng-fei, et al. Ladle Thermal Tracking Model in a Steelmaking Workshop [J], Journal of University of Science and Technology Beijing, 2011, 33 (1): 110.
Unal Camdali, Murat Tun, Steady State Heat Transfer of Ladle Furnace During Steel Production Process [J], Journal of Iron and Steel Research, International, 2006, 13(3); 18.
Cui J J, Zhang L. Three Dimensional Numerical Simulation for Temperature Field and Stress Field of Whole New Type Ladle [J]. Steelmaking, 2006, 22(5), 16.
Gaston A, Medina M. Thermal Modeling of Casting Ladles High-Alumina, Dolomite, Magnesite and Magnesia-Graphite Refractories [J]. Iron Steelmaker, 1996, 23(1): 29.
TIAN Nai-yuan, LIANG Bai-yong, JING Liang-cai, et al. Heat Test on Firing Process of 210 t Ladle of Qian Steel [J], Energy of Metallurgy, 2009, 28(6): 54.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by Technology Supporting Program During the 11th Five-Year Plan Period (BAE03A07)
Rights and permissions
About this article
Cite this article
Wu, Pf., Xu, Aj., Tian, Ny. et al. Steel Temperature Compensating Model With Multi-Factor Coupling Based on Ladle Thermal State. J. Iron Steel Res. Int. 19, 9–16 (2012). https://doi.org/10.1016/S1006-706X(12)60093-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(12)60093-4