Abstract
In flatness measuring system, the flatness measuring signal can be affected by the deflection of flatness measuring roll. The stress on flatness measuring roll was analyzed and a deflection model for the flatness measuring roll was obtained by using the influence function method. The model was developed on the basis of the deformation of flatness measuring roll in rolling process and compensation curve was obtained. The results indicated that the set curve of flatness is in good agreement with the online measured curve of flatness, and good strip flatness can be obtained.
Similar content being viewed by others
References
WANG Guo-dong. Flatness Control and Flatness Theory [M]. Beijing: Metallurgy Industry Press, 1986 (in Chinese).
Carlstedt A G, Keijser O. Modern Approach to Flatness Measurement and Control in Cold Rolling [J]. Iron and Steel Engineer, 1991, 68(4): 18.
ZHENG Gang, XIE Yun-peng, LIU Ding. The Method of Flatness Measurement and Control [J]. Heavy Machinery, 2002(4): 2 (in Chinese).
LIANG Xun-guo, JIAO Zhi-jie, WANG Guo-dong, et al. The Technology of Flatness Measurement in Cold Rolling [J]. Metallurgical Equipment, 2006, 27(6): 36 (in Chinese).
ZHONG Chun-sheng, PANG Yu-hua, MAO Xiao-chun, et al. Brief to the Trend of Studying the Methods for Profile Measuring and Control [J]. Heavy Machinery, 1998, 45(6): 1 (in Chinese).
PANG Yu-hua, ZHONG Chun-sheng, WANG Jing-tao. Trend of Research and Development of Strip Flatness Measuring Apparatus [J]. Research on Iron and Steel, 2000, 116(5): 59 (in Chinese).
LI Jin. Profile Measurement and Control of Cold Strip [J]. China Instrumentation, 1999, 18(4): 27 (in Chinese).
YU Bing-qiang, SUN Ya-bo, LIU Höng-min, et al. Compensation Model for Shape Measuring of Cold Strip Rolling [J]. Journal of Iron and Steel Research, International, 2010, 17 (6): 21.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by National Natural Science Foundation of China (50534020)
Rights and permissions
About this article
Cite this article
Liu, Jw., Zhang, Dh., Wang, Js. et al. Deflection compensation model for flatness measuring roll. J. Iron Steel Res. Int. 17, 35–37 (2010). https://doi.org/10.1016/S1006-706X(10)60194-X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(10)60194-X