Abstract
In order to build high accuracy integral dynamic models of cold rolling mill system, by analyzing the vibration process of cold rolling, the dynamic model of 4-h mill, including the rolling process model, the mill roll stand structure model and the hydraulic servo system model is built. These three models are coupled and linearized, then the multiple input and multiple output (MIMO) linear transfer function model of single stand 4-h cold mill system is obtained. The model with the proposed data proves its validity, meanwhile the effects of different working conditions on the stability of cold rolling mill system have been discussed. Simulation resulsts show that the model accords with former models and has its own advancement. It contributes to the further study and supression of coupling vibraiton.
Similar content being viewed by others
References
ZOU Jia-xiang, XU Le-jiang. Vibration Control of Cold Tandem Rolling Mill [M]. Bejing: Metallurgical Industry Press, 1998 (in Chinese).
Tlusty J, Chandra G, Critchley S. Chatter in Cold Rolling [J]. Annals of the CIRP, 1982, 31(1): 195.
HU Pei-hua, ZHAO Hu-yue, Ehmann K F. Third-Octave-Mode Chatter in Rolling. Part 1: Chatter Model [J]. Journal of Engineering Manufacture, 2006, 220B(8): 1267.
Nizoil J, Swiatoniowski A. Numerical Analysis of Vertical Vibrations of Rolling Mills and Their Negative Effect on the Sheet Quality [J]. Journal of Materials Process Technology, 2005, 162–163: 546.
Kimura Y, Sodani Y, Nishiura N, et al. Analysis of Chatter in Tandem Cold Rolling Mills [J]. 1SIJ International, 2003, 61: 338.
CHEN Yong-hui, SHI Tie-lin, YANG Shu-zi. Study on Third-Octave-Mode Chatter on 4-h Cold Rolling Mills [J]. Chinese Journal of Mechanical Engineering, 2003, 39(6): 118 (in Chinese).
ZHONG Jue, TANG Hua-ping. Vibration Problems of High Speed Rolling Mill-Study of Dynamics of Complex Electromechanically Coupled System [J]. Journal of Vibration, Measurement and Diagnosis, 2002, 22(1): 1 (in Chinese).
YAN Xiao-qiang, SHI Can. Research on Coupled Vertical-Torsion Vibration of Mill-Stand of CSP Mill [J]. Journal of Vibration, Measurement and Diagnosis, 2008, 28(4): 377 (in Chinese).
TAN Xin-cai, YAN Xiu-tian, Juster Neal P, et al. Dynamic Friction Model and Its Application in Flat Rolling [J]. Journal of Materials Processing Technology, 2008, 207(1–3): 222.
Andreas K, Kurt S, Rainer N. Nonlinear Control in Rolling Mills; A New Perspective [J]. IEEE Transactions on Industry Application, 2001, 37(5): 1394.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by National Natural Science Foundation of China (60374032); Beijing Municipal Education Commission Key Discipline Control Theory and Control Engineering of China (XK100080537)
Rights and permissions
About this article
Cite this article
Yang, X., Tong, Cn., Yue, Gf. et al. Coupling dynamic model of chatter for cold rolling. J. Iron Steel Res. Int. 17, 30–34 (2010). https://doi.org/10.1016/S1006-706X(10)60193-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(10)60193-8