Abstract
Three-dimensional finite element flow field model of spraying pipe of roller-type quenching machine is built. The flow field with different structural parameters is computed. After grouping the nozzles, the spraying uniformity is analyzed under the conditions of different water inlet pipe diameter, different water inlet pipe distance, nozzle diameter and nozzle distance. And the spraying intensity absolute deviation and relative deviation are computed under different conditions. The effect of different structural parameters on cooling uniformity is obtained. The results provide theoretical basis for improving production quality and optimizing cooling device design.
Similar content being viewed by others
References
SHAO Zheng-wei. Development Tendency of Process and Equipment of Heat Treatment for Medium and Heavy Plate [J]. Steel Rolling, 2006, 23(4): 37 (in Chinese).
HAN Li-xin. On Constructing Heat Treatment Assembly of Medium and Heavy Plate in Jigang [J]. Heat Treatment, 2003, 18(4): 22 (in Chinese).
ZOU Hong, HAN Xue-hao. Modern Plate Heat Treating Unit and Its Application Effect [J]. China Metallurgy, 2006, 16 (4): 40 (in Chinese).
TANG Zhi-yu, YANG Yun-qing, LIU Jun. Exploration of Type Choice of Process Equipment in Heat Treatment Area for Wide and Heavy Plate in Xiangtan Steelworks [J]. Wide and Heavy Plate, 2005, 11(4): 36 (in Chinese).
ZHU Dong-mei, LIU Guo-yong, LI Mou-wei. Effect of Cooling Technical Parameter on Uniform Cooling of Steel Plate [J]. Journal of Iron and Steel Research, 2005, 11(4): 36 (in Chinese).
ZHU Dong-mei, LIU Guo-yong, LI Mou-wei. Heat Residual Stress Control During Steel Plate Controlled-Cooling Process [J]. Journal of University of Science and Technology Beijing, 2008, 30(8): 947 (in Chinese).
WANG Guo-dong. Strip Shape Control and Homogeneous Cooling Technique [J]. Shanghai Metals, 2007, 29(6): 1 (in Chinese).
CAI Jin-biao, SONG Yao-hua. Modern Plate Heat Treating Unit and Its Application Effect [J]. Steel Rolling, 1997, 14 (6):3 (in Chinese).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhu, Dm., Liu, Gy., Zhang, Sj. et al. Flow Uniformity of Roller-Type Quenching Machine. J. Iron Steel Res. Int. 17, 24–27 (2010). https://doi.org/10.1016/S1006-706X(10)60151-3
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(10)60151-3