Abstract
The solubility product formulae of CuS and Cu2S in ferrite and in austenite have been obtained via thermodynamic method, according to the formation energy of CuS and Cu2S and the solubility formulae of elements Cu and S in ferrite and in austenite. By comparing the solubility products for CuS and Cu2S in iron, it is found that Cu2S instead of CuS should be precipitated in iron due to competitative precipitation, in the view of thermodynamics. The formulae of CuS and Cu2S deduced from thermodynamic method would play an important role in related theoretical research and practical production.
Similar content being viewed by others
References
LI Jun, SUN Ying, ZHAO Yu, et al. Development of Low Temperature Slab Reheating Technique for Grain-Oriented Silicon Steel [J]. Iron and Steel, 2007, 42(10), 72 (in Chinese).
XIANG Li, YUE Er-bin, QIU Sheng-tao, et al. The Precipitated Characteristics of Inhibitor (Cu2S) in the Experimental Grain Oriented Silicon Steel Produced by TSCR Process [J]. Journal of Iron and Steel Research, International, 2009, 16 (Supplement 1): 209.
PEI Ying-hao, ZHANG Jian-ping, ZHU Tao, et al. Influence of Si and Al Content on Precipitates in CSP Hot Rolled Strip of Non-Oriented Electrical Steel [J]. Iron and Steel, 2007, 42 (8): 64 (in Chinese).
SUN Zhen-bao. Alloy Steel Handbook [M]. Beijing: Metallurgical Industry Press, 1984 (in Chinese).
WENG Yu-qing. Ultrafine Grained Steel [M]. Beijing, Metallurgical Industry Press, 2003 (in Chinese).
YE Da-lun, HU Jian-hua. The Handbook of Inorganic Thermodynamic Data [M]. 2nd ed. Beijing: Metallurgical Industry Press, 2002.
LIU Zhong-zhu, Kobayashi Yoshinao, Nagai Kotobu. Morphology Control of Copper Sulfide in Strip Casting of Low Carbon Steel [J]. Tetsu-to-Hagane, 2007, 93(11), 655 (in Japanese).
Liu Z, Kobayashi Y, Nakai K. Effect of Nano-Scale Copper Sulfide Particles on the Yield Strength and Work Hardening Ability in Strip Casting Low Carbon Steel [J]. Materials Trans, 2004, 45: 479.
Chikuma Kentaro, Shimazu Takahide, Sakai Tomohiko. Cold Rolling Reduction and Magnetic Properties: Improvement of Magnetic Properties by Cu Addition in Grain-Oriented Silicon Steel [J]. Tetsu-to-Hagane, 1984, 70(5): 568 (in Japanese).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Qi, Hq., Yong, Ql. Solubility Product for CuS and Cu2S in Iron. J. Iron Steel Res. Int. 17, 36–38 (2010). https://doi.org/10.1016/S1006-706X(10)60125-2
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(10)60125-2