Skip to main content
Log in

Effect of Linear Electromagnetic Stirring on Behavior of Liquid Metal and Rate of Slag-Metal Interfacial Reactions

  • Published:
Journal of Iron and Steel Research International Aims and scope Submit manuscript

Abstract

The internal flow, free surface shape, and level fluctuation of liquid metal exposed to linear electromagnetic stirring were measured and analyzed against the background of an actual metallurgical equipment with linear electromagnetic stirring system. The desulphurization process, with or without imposition of linear electromagnetic stirring, was also studied experimentally. The changes in sulfur content of hot metal with respect to time were obtained, and the volumetric mass transfer coefficients corresponding to different stirring currents were determined. The results showed that linear electromagnetic stirring can effectively promote internal flow, effectively increase the level fluctuation, and significantly improve the kinetic condition of liquid metal. The internal flow and level fluctuation of liquid metal increase in line with the increase in electromagnetic stirring intensity. The desulphurization experiments show that linear electromagnetic stirring can significantly promote the desulphurization process of hot metal, and that the technology has wide application potential in promoting various slag-metal reactions.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Fautrelle Y, Sneyd A D. Surface Waves Created by Low-Frequency Magnetic Fields [J]. European Journal of Mechanics B/Fluids, 2005, 24(1): 91.

    Article  MathSciNet  Google Scholar 

  2. Alexis J, Jönsson P, Jonsson L. Heating and Electromagnetic Stirring in a Ladle Furnace—A Simulation Model [J]. ISIJ International, 2000, 40(11): 1098.

    Article  Google Scholar 

  3. Alexis J, Jönsson P, Jonsson L. A Model of an Induction-Stirred Ladle Accounting for Slag and Surface Deformation [J]. .ISIJ International, 1999, 39(8): 772.

    Article  Google Scholar 

  4. Sato S, Fujisaki K. Responsiveness of Free Surface Flow to MEMS Exciting Frequency [J]. IEEE Transactions on Magnetics, 2005, 41(10): 3451.

    Article  Google Scholar 

  5. Cramer A, Zhang C, Eckert S. Local Flow Structures in Liquid Metals Measured by Ultrasonic Doppler Velocimetry [J]. Flow Measurement and Instrumentation, 2004, 15(3): 145.

    Article  Google Scholar 

  6. Brito D, Nataf H C, Cardin P, et al. Ultrasonic Doppler Velocimetry in Liquid Gallium [J]. Experiments in Fluids, 2001, 31(6): 653.

    Article  Google Scholar 

  7. Eckert S, Gerbeth G, Melnikov V I. Velocity Measurements at High Temperatures by Ultrasound Doppler Velocimetry Using an Acoustic Wave Guide [J]. Experiments in Fluids, 2003, 35 (5): 381.

    Article  Google Scholar 

  8. HUANG Jun, WANG Bao-feng, LI Jian-chao, et al. Numerical Simulation of Magnetic Field and Flow Field in Electromagnetic Stirring in Ladle Furnace [J]. Steelmaking, 2008, 24(5): 33 (in Chinese).

    Google Scholar 

  9. Su Z J, Iwai K, Asai S. Characteristics of Liquid Metal Motion Driven by Quasi-Sinusoidal Magnetic Fields [J]. ISIJ International, 1999, 39(12): 1224.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yan-hua Li.

Additional information

Foundation Item: Item Sponsored by National Natural Science Foundation of China (50302004, 50674021)

Rights and permissions

Reprints and permissions

About this article

Cite this article

Li, Yh., Su, Zj. & He, Jc. Effect of Linear Electromagnetic Stirring on Behavior of Liquid Metal and Rate of Slag-Metal Interfacial Reactions. J. Iron Steel Res. Int. 17, 10–14 (2010). https://doi.org/10.1016/S1006-706X(10)60120-3

Download citation

  • Revised:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1016/S1006-706X(10)60120-3

Key words

Navigation