Abstract
The SEN clogging is a serious problem for continuous casting operation and steel quality. The kinetics mathematic model of SEN clogging during steel continuous casting is discussed. The fluid flow and inclusions motion are calculated by means of mathematic model. Effects of diameters of inclusions, roughness of nozzle, diameter of nozzle and casting speed on the entrapment probability are calculated and evaluated. The result shows that inclusions are more easily to attach to the nozzle by the following condition: smaller inclusion size, larger roughness of the wall and the smaller bulk velocity in the nozzle.
Similar content being viewed by others
References
BEI Hai, Thomas B B. Effects of Clogging, Argon Injection and Continuous Casting Conditions on Flow and Air Aspiration in Submerged Entry Nozzles [J]. Metallurgical and Materials Transaction, 1995, 26B(4): 885.
Taniguchi S, Brimacombe J K. Application of Pinch Force to the Separation of Inclusion Particles From Liquid Steel [J]. ISIJ International, 1992, 34(8): 10.
Sinha A K, Sahai Y. Mathematic Modeling of Inclusion Transport and Removal in Continuous Casting Tundishes [J]. ISIJ International, 1993, 33(5): 556.
Diter Janke, Peter Valentin, Andreas Heinen. Improvement of Castability and Quality of Continously Cast Steel [J]. ISIJ International, 2000, 40(1): 31.
Uemura K. Filtration Mechanism of Non-Metallic Inclusions in Steel by Ceramic Loop Filter [J]. ISIJ International, 1992, 32 (1): 150.
Bessho N. Numerical Analysis of Fluid Flow in the Continuous Casting Mold by A Bubble Dispersion Model [J]. Iron and Steelmaker, 1991(6): 39.
Nakanishi K. Japanese State of the Art Continuous Casting Process [J]. ISIJ International, 1996, 18(4): 534.
Rocabois P, Gatellier C, Teres J P. Non-Metallic Inclusion Entrapment by Slags Laboratory Investigation [J]. Ironmaking and Steelmaking, 2003, 30(2): 95.
Rpbert B, Kent D Pleaslee. Interaction of Alumina Inclusions in Steel With Calcium-Containing Materials [J]. Metallurgical and Materials Transaction, 2005, 36B(6): 885.
Mukao Kusuhiro, Tsujino Ryoji, Sawada Ikuo, et al. Effect of Refractory Materials on Inclusion Deposition of Immersion Nozzle in Continuous Casting and Mathematical Modeling of Inclusion Deposition [J]. CAMP-ISIJ, 1999, 85(4): 19.
Wu S, Wang Y, Zhang L, et al. Thermodynamic and Kinetics Investigation on SEN Clogging During Steel Continuous Casting [C] //Proceedings of AISTech 2009, Vol. II. St. Louis: AIST, 2009: 543.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by National Natural Science Foundation of China and Shanghai Baoshan Steel Group(50674013)
Rights and permissions
About this article
Cite this article
Wu, Sz., Zhang, Jm. & Li, Zz. Mathematic Model of SEN Clogging During Continuous Casting of Steel. J. Iron Steel Res. Int. 17, 6–9 (2010). https://doi.org/10.1016/S1006-706X(10)60119-7
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(10)60119-7