Abstract
The as-cast microstructure of H13 ESR ingot and the influence of high temperature diffusion treatment on the structure and impact toughness have been investigated. The results show that the dendrite arm spacing gradually becomes wide from the surface to the center of ingot, and the large primary carbide particles always exist in interdendritic segregation areas; by means of high temperature diffusion treatment of ingot prior to hot forging, the banded segregation is nearly eliminated, the annealed structure is more uniform and the isotropic properties have been improved remarkably.
Similar content being viewed by others
References
Eliasson I., Sandberg O. Effect of Different Parameters on Heat-Checking Properties of Hot Work Tool Steel [A]. Berns H, Nordberg H, Fleischer H, eds. New Materials and Processes for Tooling [C]. Bochum: Verlag Schurmann and Klaggers KG, 1989, 3.
Charlie R Brooks. Principles of the Austenitization of Steels [M]. London and New York: Elsevier Science Publishers LTD, 1992.
Erdmann-Jesnitzer F. Prozens V. Hannover, et al. Influence of Nucleic-Forming Agents Upon the Formation of Crystalline Structure and Segregation in the ES Remelting of Steel [A]. Chairman of Organising and Executive Committee. Proceedings of the Fifth International Conference on Vacuum Metallurgy and Electroslag Remelting Process [C]. Hanau: Leybold-Heraeus GmbH and Co KG. 1977. 11.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by National Key Technology Research and Development Program of China (2007BAE51B04)
Rights and permissions
About this article
Cite this article
Ma, Ds., Zhou, J., Chen, Zz. et al. Influence of thermal homogenization treatment on structure and impact toughness of H13 ESR steel. J. Iron Steel Res. Int. 16, 56–60 (2009). https://doi.org/10.1016/S1006-706X(10)60011-8
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(10)60011-8