Abstract
Thickness deviation of hot strip rolling needs to be strictly controlled in the computer system. An adaptive threading technique was researched, in which the measured data from threaded stands were used to predict thickness and material hardness errors, to modify the setup for the remaining unthreaded stands. After the adaptive threading model was used online on the hot strip mill of the Panzhihua Iron and Steel Group Co Ltd, the thickness deviation was decreased obviously. The hit rate of thickness control of different steel grades increases.
Similar content being viewed by others
References
William L Roberts. Hot Rolling of Steel [M]. New York: Marrcel Dekker Inc, 1983.
Kimura K, Nakagawa S, Haraguchi A, et al. Advanced Gauge Control Technology for Hot Strip Mill ( Hot Strip Rolling) [J]. Tetsu-to-Hagane, 1993, 79(3): 352 (in Japanese).
Ishiii T, Wada S, Miyokawa M, et al. Recent Technology in Hot Strip Mill [A]. The Iron and Stool Institute of Japan, eds. Proceedings of the 7th International Conference on Steel Rolling [C]. Chiba: The Iron and Steel Institute of Japan, 1998. 711.
WANG Tong, LIU Xiang-hua, WANG Guo-dong, et al. Im provement of Thickness Accuracy of Hot Strip at the Ends b Dynamical Modification of Mill Stretch [J]. Journal of Iron a Steel Research, 1999, 11(2): 135 (in Chinese).
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by National Natural Science Foundation of China (50104004)
Rights and permissions
About this article
Cite this article
Ding, Jg., Hu, Xl., Jiao, Jm. et al. Application of adaptive threading technique to hot strip mill. J. Iron Steel Res. Int. 15, 29–31 (2008). https://doi.org/10.1016/S1006-706X(08)60244-7
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(08)60244-7