Abstract
The precision of profile and thickness is the most important target for wide strip rolling, but the coupling of profile control and thickness control is ignored in rolling schedule, which holds down the simultaneous quality improvement of profile and thickness. A cross-coupled process control model for combined shape and gauge control was developed on the basis of the fact that both controls for profile and thickness are realized by controlling the rolling gap. A dynamic decoupling controller was then proposed to decouple the model. Both the simulation results and the online production data are valid and ensure the quality of the decoupling controller.
Similar content being viewed by others
References
ZHANG Jin-zhi. Dynamic Set-Up for Combined Shape and Thickness Control System [J]. Metallurgical Equipments, 2000, 10: 62.
HUANG Qing-xue. High Precision Technology for Rolling [M]. Beijing, China: Metallurgical Industry Press, 2002.
CAO Jian-guo. The Cross-Coupling for Shape and Thickness [J]. Journal of University of Science and Technology Beijing [J]. 2000, 22(6): 551.
LIAN Jia-chuang. Combined Shape and Thickness Control [M]. Beijing, China: The Publishing House of Weapon Industry, 1996.
WANG Yong-chu. Decoupling Control System [M]. Chengdu, China: The Publishing House of Science and Technologies Sichuan, 1985.
Riegler G W, Aberl H R, Aistleitner K, et al. Improved Rolling Mill Automation by Means of Advanced Control Techniques and Dynamic Simulation [J]. IEEE Trans Industry Applications, 1996, 32(12): 1604.
Isermann R. Identifikation Dynamischer Systeme [M]. 2nd ed. Heidelberg, Germany: Springer-Verlag Berlin, 1988.
Kusters A, van Ditzhuijzen G A J M. MIMO System Identification of a Slab Reheating Furnace [J]. IEEE, 1994, 3(24-26): 1557.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by National Significant Technical Equipment Research and Development Project of 10th Five-Year-Plan of China (ZZ02-1313-03-03)
Rights and permissions
About this article
Cite this article
Linghu, Kz., He, Ar., Yang, Q. et al. Dynamic Decoupling for Combined Shape and Gauge Control System in Wide Strip Rolling Process. J. Iron Steel Res. Int. 15, 28–31 (2008). https://doi.org/10.1016/S1006-706X(08)60026-6
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(08)60026-6