Abstract
A genetic algorithm-based optimization was used for 1 370 mm tandem cold rolling schedule, in which the press rates were coded and operated. The superiority individual is reserved in every generation. Analysis and comparison of optimized schedule with the existing schedule were offered. It is seen that the performance of the optimal rolling schedule is satisfactory and promising.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
LIANG Guo-ping. The Optimum Distribution of Loads on Rolling Mills [J]. Iron and Steel, 1980, 15(1): 42 (in Chinese).
Wang D D, Tieu A K, de Boer F G. Toward a Heuristic Optimum Design of Rolling Schedule for Tandem Cold Rolling Mills [J]. Engineering Appl of Artificial Intelligence, 2000, 13(4): 397.
LU Ji-min, WEI Li-qun. Optimizing Process of Steel Strip Hot Continuous-Rolling Rules [J]. Journal of Shanghai Technical College of Metallurgy, 1989, 10(3): 1 (in Chinese).
Sarker R, Liang K H, Newton C. A New Multiobjective Evolutionary Algorithm [J]. Eur J Oper Res, 2002, 140(1): 12.
DI Hong-shuang, XU Jian-zhong, GONG Dian-yao. Effect of Load Distribution on Strip Crown in Hot String Rolling [J]. J Master Sci Technol, 2004, 20(3): 330.
Hsiao-Lan Fang, Chung-Hsiu Tsai. A Genetic Algorithm Approach to Hot Strip Mill Rolling Scheduling Problems [A]. IEEE, eds. The 1998 IEEE 10th International Conference on Tools With Artificial Intelligence [C]. Piscataway: IEEE, 1998. 264.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yang, Jm., Che, Hj., Dou, Fp. et al. Genetic Algorithm-Based Optimization Used in Rolling Schedule. J. Iron Steel Res. Int. 15, 18–22 (2008). https://doi.org/10.1016/S1006-706X(08)60024-2
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(08)60024-2