Abstract
Three passes of plate rolling during vertical-horizontal rolling process are simulated with explicit dynamic finite element method and updating geometric method. The equivalent strain and stress fields, and shape change at the head and tail of slab during rolling are obtained. The calculated result of the shape at the head and tail of slab is in good agreement with the measured one. The explicit dynamic finite element method and updating geometric method can be used effectively to analyze the multipass vertical-horizontal (V-H) rolling process.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Okado M, Arizumi T, Noma Y, et al. Width Behaviour of Head and Tail of Slabs at Edging Rolling in Hot Strip Mills [J]. J Iron and Steel Inst Jpn, 1981, 67(15): 2516–2525.
Ginzburg V B. Steel Rolling Technology: Theory and Practice [M]. New York: Marcel Dekker, 1989.
XIONG Shang-wu, ZHU Xiang-ling, LIU Xiang-hua, et al. Mathematical Model of Width Reduction Process of Roughing Trains of Hot Strip Mills [J]. Shanghai Metals, 1997, 19(1): 39–42.
Mori K, Osakada K. Simulation of Three-Dimensional Rolling by the Rigid-Plastic Finite Element Method [A]. Pittman J F T, Wood R D, Alexander J M, et al eds. Proceedings of the International Conference on Numerical Methods in Industrial Forming Processes [C]. Swansea: Pineridge Press, 1982. 747–756.
Huisman H J, Huetink J. A Combined Eulerian-Langrangian Three-Dimensional Finite-Element Analysis of Edge-Rolling [J]. J Mech Work Technol, 1985, 21(11): 333–353.
David C, Bertrand C, Chenot J L, et al. A Transient 3D FEM Analysis of Hot Rolling of Thick Slabs [A]. Mattiasson K, Samuelsson A, Wood R D, et al, eds. Proceedings of Numiform’ 86 [C]. Rotterdam, Netherlands: Balkema A A, 1986. 219–224.
Nikaido H, Naoi T, Shibata K, et al. Numerical Simulation of Width Spread of Dog-Bone Slab in Non-Steady Horizontal Rolling [J]. J Jpn Soc Technol Ptasticity, 1984, 25(277): 129–135.
XIONG Shang-wu, LIU Xiang-hua, WANG Guo-dong, et al. A Three-Dimensional Finite Element Simulation of the Vertical-Horizontal Rolling Process in the Width Reduction of Slab [J]. J Mater Process Technol, 2000, 101(1): 146–151.
XIONG Shang-wu, ZHENG Gui-fang, LIU Xiang-hua, et al. Analysis of the Non-Steady State Vertical-Horizontal Rolling Process in Roughing Trains by the Three-Dimensional Finite Element Method [J]. J Mater Process Technol, 2002, 120(1–3): 53–61.
XIONG Shang-wu, Rodrigues J M C, Martins P A F. Three-Dimensional Modeling of the Vertical-Horizontal [J]. Finite Elements in Analysis and Design, 2003, 39: 1023–1037.
ZHAO Xian-ming, WANG Guo-dong, PARK Hae-doo. Influence of Vertical Roll Shape on Bar Camber by FEM and Analytic Modeling [J]. Journal of Northeastern University (Natural Science), 2002, 23(12): 1174–1176 (in Chinese).
Chung W K, Choi S K, Thomson P F. Three-Dimensional Simulation of the Edge Rolling Process by the Explicit Finite-Element Method [J]. J Mater Process Technol, 1993, 38(1–2): 85–102.
Esa Ervasti, ULF Stahlberg. Behavior of Longitudinal Surface Cracks in the Hot Rolling of Steel Slabs [J]. J Mater Process Technol, 1999, 94(2): 141–150.
Esa Ervasti, ULF Stahlberg. Transversal Cracks and Their Behavior in Hot Rolling of Steel Slabs [J]. J Mater Process Technol, 2000, 101(1): 312–321.
Iguchi T, Owen D R J, LIU G Q. Analysis of Rolling Processes by Dynamic Explicit Elastic-Plastic Finite Element Method [A]. Kiuchi M, eds. Proceedings of 7th International Conference on Steel Rolling (STEEL ROLLING’98) [C]. Chiba: Iron and Steel Institute of Japan, 1998. 266–271.
LIU Li-zhong, LIU Xiang-hua, JIANG Zheng-yi. Strip Rolling Simulation by the Dynamic Explicit FEM [J]. Journal of Plasticity Engineering, 2001, 8(1): 51–54 (in Chinese).
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by State Ministry of Science and Technology of China (G2000067208-4)
Rights and permissions
About this article
Cite this article
Yu, Hl., Liu, Xh., Zhao, Xm. et al. Explicit Dynamic FEM Analysis of Multipass Vertical-Horizontal Rolling. J. Iron Steel Res. Int. 13, 26–30 (2006). https://doi.org/10.1016/S1006-706X(06)60056-3
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(06)60056-3