Abstract
The stretch of blocks with rectangular section using flat anvils was simulated by using ANSYS software. The inner stress distribution for different tool width ratio w/h and blank width ratio b/h was studied. Consequently, critical anvil width ratio (w/h)c and critical blank width ratio (b/h)c are obtained, which provide a sound basis for designing reasonable stretching technology.
Similar content being viewed by others
References
Унkсов E П, Caфapoв C, Maльпин Ф К. Simulation of Forging and Stretching Using Light-Sensitive Material Frozen Deformation Method [J]. Forging Production, 1975, (6): 2–6 (in Russian).
Suzuki A. New Technology Applied to Production of Rotor Forgings [A]. The 9th International Forging Conference [C]. Dusseldorf, Germany: Verein Deutscher Eisenhuttenleute, 1981. 1–12.
LIU Zhu-bai. The New Technology and Its Mechanism Theory of Plastic Deformation [M]. Beijing: China Machine Press, 1995 (in Chinese).
LIU Zhu-bai. The New Theory During Stretching a Blank With Rectangle Cross Section Between Two Flat Platens [J]. Chinese Journal of Mechanical Engineering, 1994, 30(5): 47–49 (in Chinese).
ZHU Ji-wu. Research of Theory and Technology During Stretching a Blank with Rectangle Cross Section Between Two Flat Platens [D]. Qiqihar: Northeastern Heavy Machinery Institute, 1995 (in Chinese).
ZHOU Ji-hua, GUAN Ke-zhi. The Resistance of Metal Plastic Deformation [M]. Beijing: China Machine Press, 1989 (in Chinese).
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by Doctoral Foundation of Education Ministry of China (96021603)
Rights and permissions
About this article
Cite this article
Deng, Dm., Liu, Zb. & Zhou, Ls. Numerical Simulation of Inner Stress Fields for Stretching Block With Rectangular Section Between Flat Anvils. J. Iron Steel Res. Int. 13, 75–78 (2006). https://doi.org/10.1016/S1006-706X(06)60031-9
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(06)60031-9