Abstract
A three-dimensional model for strip hot rolling was developed, in which the plastic deformation of strip, the thermal crown of rolls, roll deflection and flattening were calculated by rigid-plastic finite element method, finite difference method, influential function method and elastic finite element method respectively. The roll wear was taken into consideration. The model can provide detailed information such as rolling pressure distribution, contact pressure distribution between backup rolls and work rolls, deflection and flattening of work rolls, lateral distribution of strip thickness, and lateral distribution of front and back tensions. The finish rolling on a 1 450 mm hot strip mill was simulated.
Similar content being viewed by others
References
Tozawa Y. Analysis of Three-Dimensional Deformation in Strip Rolling Taken Deformation of Rolls into Consideration [A]. Manabu Kiuchi, eds. Proc Conf Advanced Technology of Plasticity [C]. Tokyo, Japan: Springer, 1984. 1151–1160.
XIAO H, Aizawa T, Kihara J. Development of Three Dimensional Boundary Element Simulater for Rolling [A]. Tanaka M, YAO Z H, eds. Boundary Element Methods [C]. Tokyo, Japan: Elsevier Press, 1996. 287–296.
LIAN Jia-chuang. Progress of Analysis Metal Lateral Flow in Roll Gap by Variational Method [A]. Rolling Steel Department of CSM, eds. Rolling Steel [C]. Beijing, China: Rolling Steel Department of CSM, 1996. 194–198 (in Chinese).
Yanagimoto Jun, Kiuchi Manabu. Three-Dimensional Simulation System for Coupled Elastic/Rigid Plastic Deformations of Rolls and Workpieces in Strip Rolling Process [A]. Balkerma A A, Rotterdam, Valbonne, eds. Proc NUMIFORM' 92 [C]. Tokyo, Japan: ISIJ, 1992. 763–768.
Hacquin A, Montemtonnet P, Guillerault J P. Coupling of Roll and Strip Deformation in 3D Simulation of Hot Rolling [A]. Dawson P R, eds. Proc Numiform' 95 [C]. Ithaca, NY, USA: BALKEMA Rotterdam, 1995. 921–927.
GUO Jian-bo. Study on Profile and Shape Control Technology of Hot Strip Mills [D]. Qinhuangdao: Yanshan University, 1998 (in Chinese).
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by National Natural Science Foundation of China (50275130) and Provincial Natural Science Foundation of Hebei Province of China (E200400223)
Rights and permissions
About this article
Cite this article
Zhang, Gm., Xiao, H. & Wang, Ch. Three-Dimensional Model for Strip Hot Rolling. J. Iron Steel Res. Int. 13, 23–26 (2006). https://doi.org/10.1016/S1006-706X(06)60020-4
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(06)60020-4