Abstract
This work deals with the active control of the vibrations of mechanical structures incorporating magnetorheological elastomer. The damping coefficient and shear modulus of the elastomer increase when exposed to a magnetic field. Compared with the vibration control where the elastomer is permanently exposed to a magnetic field, the control of this process through time reduces vibrations more effectively. The experimental study for the vibrations of a sandwich beam filled with an elastomer is conducted, followed by a numerical study using the Abaqus code. The vibration damping is found to be dependent on the loading rate of micro-size ferromagnetic particles in the elastomer.
Similar content being viewed by others
References
Zhou, Y. and Zhang, Y.L., Optimal design of a shear magnetorheological damper for turning vibration suppression. Smart Mater. Struct., 2013, 22: 0964-1726.
Borbáth, T., Günther, S., Yu Borin, D., Gundermann Th. and Odenbach, S., XμCT analysis of magnetic field-induced phase transitions in magnetorheological elastomers. Smart Mater. Struct., 2012, 21: 0964-1726.
Sedlačík, M., Pavlínek, V., Sáha, P., Švrčinová, P., Filip, P. and Stejskal, J., Rheological properties of magnetorheological suspensions based on core-shell structured polyaniline-coated carbonyl iron particles. Smart Mater. Struct., 2010, 19: 0964-1726.
Li, Y., Li, J., Tian, T. and Li, W., A highly adjustable magnetorheological elastomer base isolator for applications of real-time adaptive control. Smart Mater. Struct., 2013, 22: 0964–1726.
Li, Y., Li, J., Li, W. and Samali, B., Development and characterization of a magnetorheological elastomer based adaptive seismic isolator. Smart Mater. Struct., 2013, 22: 0964–1726.
Zhou, G.Y. and Wang, Q., Use of magnetorheological elastomer in an adaptive sandwich beam with conductive skins. Part I: Magnetoelastic loads in conductive skins. International Journal of Solids and Structures, 2006, 43: 5386–5402.
Zhou, G.Y. and Wang, Q., Use of magnetorheological elastomer in an adaptive sandwich beam with conductive skins. Part II: Dynamic properties. International Journal of Solids and Structures, 2006, 43: 5403–5420.
Nayak, B., Dwivedy, S.K. and Murthy, K., Multi-frequency excitation of magnetorheological elastomer-based sandwi ch beam with conductive skins. International Journal of Non-Linear Mechanics, 2012, 47: 448–460.
Nayak, B., Dwivedy, S.K. and Murthy, K., Dynamic analysis of magnetorheological elastomer-based sandwich beam with conductive skins under various boundary conditions. Journal of Sound and Vibration, 2011, 330: 1837–1859.
Dwivedy, S.K., Mahendra, N. and Sahu, K.C., Parametric instability regions of a soft and magnetorheological elastomer cored sandwich beam. Journal of Sound and Vibration, 2009, 325: 686–704.
Yeh, J.Y., Vibration analysis of sandwich rectangular plates with magnetorheological elastomer damping treatment. Smart Mater. Struct., 2013, 22: 0964–1726.
Ying, Z.G., Ni, Y.Q. and Ye, S.Q., Stochastic micro-vibration suppression of a sandwich plate using a magnetorheological viscoelastomer core. Journal of Smart Materials and Structures, 2014, 23: 025019 (11pp).
Aguib, S., Nour, A., Zahloul, H., Bossis, G., Chevalier, Y. and Lançon, P., Dynamic behavior analysis of a magnetorheological elastomer sandwich plate. International Journal of Mechanical Sciences, 2014, 87: 118–136.
Dyniewicz, B., Bajkowski, J.M. and Bajer, C.I., Semi-active control of a sandwich beam partially filled with magnetorheological elastomer. Mechanical Systems and Signal Processing, 2015, 60–61: 695–705.
Khimi, S.R. and Pickering, K.L., Comparison of dynamic properties of magnetorheological elastomers with existing antivibration rubbers. Composites Part B, 2015, 83: 175–183.
Sedlacik, M., Mrlik, M., Babayan, V. and Pavlinek, V., Magnetorheological elastomers with efficient electromagnetic shielding. Composite Structures, 2016, 135: 199–204.
Wang, Y. and Inman, D.J., Finite element analysis and experimental study on dynamic properties of a composite beam with viscoelastic damping. Journal of Sound and Vibration, 2013, 332: 6177–6191.
Ooi, L.E. and Ripin, Z.M., Dynamic stiffness and loss factor measurement of engine rubber mount by impact test. Materials and Design, 2011, 32: 1880–1887.
Vicente, D.J., Bossis, G., Lacis, S. and Guyot, M., Permeability measurements in cobalt ferrite and carbonyl iron powders and suspensions. Journal of Magnetism and Magnetic Materials, 2002, 251: 100–108.
Hoffmann, C. and Franzreb, M., A novel repulsive-mode high gradient magnetic separator. Part I. Design and experimental results, IEEE T Magn, 2004, 40: 456–461.
Whitney, J.M., Structural Analysis of Laminated Anisotropic Plates. Technomic Publishing Company, ISBN 87762-518-2, 1987.
Berthelot, J.M., Mechanical Behavior of Composite Materials and Structures. 3rd edition, Technical & Documentation, 1999.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chikh, N., Nour, A., Aguib, S. et al. Dynamic analysis of the non-linear behavior of a composite sandwich beam with a magnetorheological elastomer core. Acta Mech. Solida Sin. 29, 271–283 (2016). https://doi.org/10.1016/S0894-9166(16)30161-6
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S0894-9166(16)30161-6