Skip to main content
SpringerLink
Log in

Simulation of the In-Pile Behaviors Evolution in Nuclear Fuel Rods with the Irradiation Damage Effects

  • Published:
Acta Mechanica Solida Sinica Aims and scope Submit manuscript

Abstract

Based on the commercial computational software, a three-dimensional finite element model to simulate the thermo-mechanical behaviors in a nuclear fuel rod is established; By taking into consideration irradiation-swelling of the pellet and the irradiation damage effects in the cladding together with the coupling effects between the temperature field and the mechanical field, the user subroutines to define the special material performance and boundary conditions have been developed independently and validated. Three-dimensional numerical simulation of the thermo-mechanical coupling behaviors in a nuclear fuel rod is carried out, and the evolution rules of the important thermal and mechanical variables are obtained and analyzed. The research results indicate that: (1) the fuel pellets will be in contact with the cladding at high burnup, which will induce a strong mechanical interaction between them; (2) the irradiation creep effect plays an important role in the mechanical behavior evolution in the nuclear fuel rod.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Massih, A.R. and Forsberg, K., Calculation of grain boundary gaseous swelling in UO2. Journal of Nuclear Materials, 2008, 377: 406–408.

    Article  Google Scholar 

  2. Azevedo, C.R.F., A review on neutron-irradiation-induced hardening of metallic components. Engineering Failure Analysis, 2011, 18: 1921–1942.

    Article  Google Scholar 

  3. Pieroy, G.B., Mechanisms for the in-reactor creep of zirconium alloys. Journal of Nuclear Materials, 1968, 26: 18–50.

    Article  Google Scholar 

  4. Soba, A. and Denis, A., Simulation with DIONISIO 1.0 of thermal and mechanical pellet-cladding interaction in nuclear fuel rods. Journal of Nuclear Materials, 2008, 374: 32–43.

    Article  Google Scholar 

  5. Denis, A. and Soba, A., Simulation of pellet-cladding thermomechanical interaction and fission gas release. Nuclear Engineering and Design, 2003, 223: 211–229.

    Article  Google Scholar 

  6. Feltus, M.A. and Lee, K., Evaluation of the FRANCO finite element fuel rod analysis code. Annals of Nuclear Energy, 1996, 23(7): 553–565.

    Article  Google Scholar 

  7. Marchal, N., Campos, C. and Garnier, C., Finite element simulation of Pellet-Cladding Interaction (PCI) in nuclear fuel rods. Computational Materials Science, 2009, 45: 821–826.

    Article  Google Scholar 

  8. Struzik, C., Moyne, M. and Piron, J.P., High burn-up modeling of UO2 and MOX fuel with METEOR/TRANSURANUS version 1.5. ANS International Topical Meeting on Light Water Reactor Fuel Performance, Portland., 1997.

    Google Scholar 

  9. Newman, C., Hansen, G. and Gaston, D., Three dimensional coupled simulation of thermomechanics, heat, and oxygen diffusion in UO2 nuclear fuel rods. Journal of Nuclear Materials, 2009, 392: 6–15.

    Article  Google Scholar 

  10. Michel, B., Sercombe, J. and Thouvenin, G., A new phenomenological criterion for pellet-cladding interaction rupture. Nuclear Engineering and Design, 2008, 238: 1612–1628.

    Article  Google Scholar 

  11. Michel, B., Plancq, D., Struzik, C., Garcia, Ph. and Lansiart, S., Pellet cladding mechanical interaction assessment using 3D modeling. In: 18th Internatianal Conference on Structural Mechanics in Reactor Technology, beijing, China, 2005.

    Google Scholar 

  12. Marino, A.C., Savino, E.J. and Harriague. S., BACO (BArra COmbustible) code version 2.20: a thermomechanical description of a nuclear fuel rod. Journal of Nuclear Materials, 1996, 229: 155–168.

    Article  Google Scholar 

  13. Pontedeiro, A.C., Cotta, R.M. and Su, J., Improved lumped model for thermal analysis of high burn-up nuclear fuel rods. Progress in Nuclear Energy, 2008, 50: 767–773.

    Article  Google Scholar 

  14. Ding, S.R., Jiang, X., Huo, Y.Z. and Li, L.A., Reliability analysis of dispersion nuclear fuel elements. Journal of Nuclear Materials, 2008, 374: 453–460.

    Article  Google Scholar 

  15. Williamson, R.L., Enhancing the ABAQUS thermomechanics code to simulate multipellet steady and transient LWR fuel rod behavior. Journal of Nuclear Materials, 2011, 415: 74–83.

    Article  Google Scholar 

  16. Jiang, Y.J., Cui, Y., Huo, Y.Z. and Ding, S.R., Three-dimensional FE analysis of the thermal-mechanical behaviors in the nuclear fuel rods. Annals of Nuclear Energy, 2011, 38: 2581–2593.

    Article  Google Scholar 

  17. Yu, S.D. and Xu, S., Modeling of three-dimensional steady statenon-linear heat transfer in CANDU nuclear fuel. Nuclear Engineering and Design, 2002, 216: 165–181.

    Article  Google Scholar 

  18. Lucuta, P.G., Matzke, H.S. and Hastings, I.J., A pragmatic approach to modeling thermal conductivity of irradiated UO2 fuel: Review and recommendations. Journal of Nuclear Materials, 1996, 232: 166–180.

    Article  Google Scholar 

  19. MATPRO-09, A Handbook of Materials Properties for Use in the Analysis of Light Water Reactor Fuel Rod Behavior, USNRC TREENUREG-1005, 1976.

  20. Suzuki, M. and Saitou, H., Light Water Reactor Fuel Analysis Code FEMAXI-6 (Ver.1), JAEA-Data/Code, 2005-003.

  21. Fisher, E.F. and Renken, C.J., Single-crystal elastic moduli and the Hcp-transformation in Ti, Zr and Hf. Physical Review, 1964, 135: 482–494.

    Article  Google Scholar 

  22. Hagrman, D.L. and Reyman, G.A., MATPRO-Version 11, A Hnadbook of Materials Properties for Use in the Analysis of Light Water Reactor Fuel Rod Behavior, NUREG/CR-0497, TREE-1280. EG&G Idaho, Inc., 1979.

  23. Fedorov, A.G. and Viskanta, R., Turbulent natural convection heat transfer in an asymmetrically heated, vertical parallel-plate channel. International Journal of Heat Mass Transfer, 1997, 40(16): 3849–3860.

    Article  Google Scholar 

  24. Newman, C., Hansen, G. and Gaston, D., Three dimensional coupled simulation of thermomechanics, heat, and oxygen diffusion in UO2 nuclear fuel rods. Journal of Nuclear Materials, 2009, 392: 6–15.

    Article  Google Scholar 

  25. Duyn, L.V., Evaluation of the Mechanical Behavior of a Metal-matrix Dispersion Fuel for Plutonium Burning. A thesis for Master Degree, Georgia Institute of Technology, 2003.

  26. Kudryashov, N.A., Khlunov, A.V. and Chmykhov, M.A., Thermal regimes of high burn-up nuclear fuel rod. Commun Nonlinear Sci Numer Simulat, 2010, 15: 1240–1252.

    Article  MathSciNet  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanics and Engineering Science, Fudan University, Shanghai, 200433, China

    Xin Gong, Yijie Jiang, Shurong Ding & Yongzhong Huo

  2. Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, 730000, China

    Canglong Wang & Lei Yang

Authors
  1. Xin Gong
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yijie Jiang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Shurong Ding
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Yongzhong Huo
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Canglong Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Lei Yang
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Shurong Ding.

Additional information

Project supported by the National Natural Science Foundation of China (Nos. 11172068, 91226101, 11072062 and 91026005), the Research Fund for the Doctoral Program of Higher Education of China (No. 20110071110013), and the Strategic Priority Research Program of the Chinese Academy of Sciences (No. XDA01020304).

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Gong, X., Jiang, Y., Ding, S. et al. Simulation of the In-Pile Behaviors Evolution in Nuclear Fuel Rods with the Irradiation Damage Effects. Acta Mech. Solida Sin. 27, 551–567 (2014). https://doi.org/10.1016/S0894-9166(15)60001-5

Download citation

  • Received:

  • Revised:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1016/S0894-9166(15)60001-5

Key Words

Search

Navigation