Abstract
An investigation is made on the soil pressure in a nine cabin opened bottom elliptical barrel structure. The calculation models using the penetration of negative pressure method have been developed. The first calculation model is is for the construction stage involving three zones, namely, passive, transitional, and active established for the soil pressure in cabins. The other calculation model is based on the use stage, with the two (passive and active) zones for the soil pressure in cabins. The height of zones and the theoretical analytical solutions of inner soil pressure are derived. The analytical formulas of the models are proved using the finite element method and experimental data, and the formulas are analyzed in the inner soil pressure in the same condition. The calculation models can be used for other multi-position structural design or construction.
Similar content being viewed by others
References
Zhou, Z.Z., Chen, B.Z. and Liu, J.Q., The research of model experiment and calculating method for retaining wall of large-diameter-open tubes. Geotechnical Engineer, 1991, 4: 83–90.
Xu, J. and Wang, D.Y., Numerical simulation of large diameter cylindrical structure lamming. China Ocean Engineering, 2008, 22(3): 513–520.
Zhou, X.R. , Wang, H. and Han, G.J., Design and calculation of the large-diameter cylinder shell structure. Port Engineering Technology, 1995, 2: 22–30.
Shen, D., Yao, W.J. and Chen, Z.K., Influence of soil consolidation upon working performance of cylindrical bucket foundation structure. Port & Waterway Engineering, 2014, 10: 149–155.
Wang, Y.J. and Meng, Q.W., New formulas of earth pressure on large successive cylinders. China Ocean Engineering, 1998, 12(4): 443–452.
Xiao, Z. and Wang, Y.Z., Finite element analysis for dynamic stability of bucket foundation breakwater. Journal of Transport Science and Engineering, 2014, 30(4): 65–72.
Li, W., Study and application of plug-in breakwater structure with bucket-box foundation. Tianjin Science & Technology, 2011, 2: 30–32.
Zhang, X.Z., Yao, W.J. and Cheng, Z.K., Settlement analysis of multi-barrel structure warehouse using penetration of negative pressure method in construction stage. Journal of Chang’an University (Natural Science Edition), 2015, 35(1): 91–97.
Liu, J.Q., Calculation of settlement and filler pressure on open cylinder. Port Engineering Technology, 1999, 4: 11–16.
Liu, J.Q., Deformation of large-diameter cylindrical buried structures. Chinese Journal of Geotechnical Engineering, 1994, 16(2): 64–72.
Shu, X.W., Bie, S.A. and Wang, C.S., Force mode and reasonable scale of breakwater structure with bucket-box foundation. Journal of Tianjin University, 2012, 45(8): 700–707.
Liu, J.Q. and Meng, X.J., Evaluation of inner soil pressure on opened bottom cylindrical structure. China Ocean Engineering, 2004, 18(1): 21–34.
Xiao, Z., Wang, Y.Z. and Ji, C.N., Stability analysis of semi-circular breakwater on soft foundation under combined loading. Rock and Soil Mechanics, 2014, 35(3): 789–794, 800.
Liu, J.Q., Chen, B. and Wang, H.Y., Determination of the critical value of deflection for embedded cylindrical structures. China Ocean Engineering, 2005, 19(3): 37–40.
Xu, W., Lianyungang Port breakwater cross-section of tube-type structure model test report. Shanghai: CCCC Third Harbor Consultants Co. Ltd., 2011.
Leavachif, C.H., Application of Thin Shell in Hydraulic Constructions. Beijing: The People’s Communications Publishing House, 1982.
Chen, W.J., Port Engineering. Beijing: The People’s Communications Publishing House, 1989.
Hung, L.C. and Kim, S.R., Evaluation of vertical and horizontal bearing capacities of bucket foundations inclay. Ocean Engineering, 2012, 52: 75–82.
Zhu, C.H., Research on computation of the static filler pressure inside buried large-diameter cylinder. Port Engineering Technology, 2002, 3: 39–43.
Yao, W.J. , Xiong, S. and Chen, J.L., Study on dynamic plastic displacement to large-diameter cylindrical structure. Port & Waterway Engineering, 2009, 11: 11–17.
Lin, P., Yao, W.J. and Zhang, J., Effect of different forms of cylindrical bucket foundation structure upon anti-overturning ability of cylindrical bucket foundation structure. China Harbour Engineering, 2013, 6: 30–35, 52.
Fraldi, M. and Guarracino, F., Analytical solutions for collapse mechanisms in tunnels with arbitrary cross sections. International Journal of Solids and Structures, 2010, 47(2): 216–223.
Wang, Y.Z., Large-diameter cylindrical structure calculation and applications in engineering. Beijing: The People’s Communications Publishing House, 2008.
Yang, X.L. and Huang, F., Collapse mechanism of shallow funnel based on nonlinear Hoek-Brown failure criterion. Tunnelling and Underground Space Technology, 2011, 26(6): 686–691.
Shi, Y.J., Wu, M.L. and Jiang, X.L., Experimental researches on reflective and transmitting performance of quarter circular breakwater under regular and irregular waves. China Ocean Engineering, 2011, 25(3): 469–487.
Author information
Authors and Affiliations
Corresponding author
Additional information
Project supported by Open Fund Project of Hunan Province Research Center for Safety Control Technology and Equipment of Bridge Engineering (Changsha University of Science & Technology) (No. 13KC05).
Rights and permissions
About this article
Cite this article
Zhang, X. Research on Soil Pressure in Nine Cabins of Opened Bottom Elliptical Barrel Structure Using Penetration of Negative Pressure Method. Acta Mech. Solida Sin. 28, 556–567 (2015). https://doi.org/10.1016/S0894-9166(15)30049-5
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S0894-9166(15)30049-5