Abstract
Heterogeneous dynamical stress-strain response of Armco-Fe was investigated at high strain rates through the Split Hopkinson Pressure Bar (SHPB) testing. It was found that the viscoplastic deformation in BCC ferrite grains is affected by the strain rate. Thermal softening and variation in crystal orientations under high-strain-rate loading were used in the elastic-viscoplastic modeling. The micromechanical analysis with self-consistent transition and homogenization was used for estimation of the global impact response of the material. The results from modeling were found in good agreement with the experimental data.
Similar content being viewed by others
References
Zhao, H., Material behaviour characterization using SHPB techniques, tests and simulations. Computers & Structures, 2003, 81: 1301–1310.
Molinari, A. and Ravichandran, G., Constitutive modeling of high-strain-rate deformation in metals based on the evolution of an effective microstructural length. Mech. Mater., 2005, 37: 737–752.
Gao, C.Y. and Zhang, L.C., Constitutive modelling of plasticity of fcc metals under extremely high strain rates. Int. J. Plast., 2012, 32–33: 121–133.
Kröner, E., Bounds for effective elastic moduli of disordered materials. J. Mech. Phys. Solids, 1977, 25: 137–155.
Paquin, A., Sabar, H. and Berveiller, M., Integral formation and self-consistent modeling of elasto viscoplastic behavior of heterogeneous materials. Arch. Appl. Mech., 1999, 69: 14–25.
Berveiller, M. and Zaoui, A., A simplified self-consistent scheme for the plasticity of two-phase metals. Res. Mech. Lett., 1981, 1: 119–124.
Eshelby, J.D., The determination of the elastic field of an ellipsoidal inclusion and related problems. Proc. R. Soc. London A, 1957, 241: 376–396.
Berveiller, M., Fassi-Fehri, O. and Hihi, A., The problem of two plastic and heterogeneous inclusions in an anisotropic medium. Int. J. Engng. Sci., 1987, 25(6): 691–709.
Sabar, H., Berveiller, M., Favier, V. and Berbenni, S., A new class of micro-macro models for elastic-visoplastic heterogeneous materials. Int. J. Solids Struct., 2002, 39: 3257–3276.
Voyiadjis, G.Z. and Abed, F.H., Microstructural based models for bcc and fcc metals with temperature and strain rate dependency. Mech. Mater., 2003, 37(2–3): 55–378.
Paquin, A., Berbenni, S., Favier, V., Lemoine, X. and Berveiller, M., Micromechanical modeling of the elastic-viscoplastic behavior of polycrystalline steels. Int. J. Plast., 2001, 17: 1267–1368.
Hutchinson, J.W., Bounds and self-consistent estimates for creep of polycrystalline materials. Proc.R.Soc.Lond. A, 1976, 348: 101–127.
Essmann, U. and Mughrabi, H., Annihilation of dislocations during tensile and cyclic deformation and limits of dislocations densities. Phil. Mag., 1979, 40(6): 731–756.
Rossiter, J., Brahme, A., Simha, M.H., Inal, K. and Mishra, R., A new crystal plasticity scheme for explicit time integration codes to simulate deformation in 3D microstructures: Effects of strain path, strain rate and thermal softening on localized deformation in the aluminum alloy 5754 during simple shear. Int. J. Plast. , 2010, 26: 1702–1725.
Bunge, H.J., Texture Analysis in Materials ScienceButterworths. London: Butterworths, 1982.
Berbenni, S., Favier, V., Lemoine, X. and Berveiller, M., Micromechanical modeling of the elastic-viscoplastic behavior of polycrystalline steels having different microstructures. Mater. Sci. Eng. A, 2004, 372: 128–136.
Bao, W.P., Ren, X.P. and Zhang, Y., The characteristics of flow stress and dynamic constitutive model at high strain rates for pure iron. J. Plast. Eng., 2009, 16(5): 126–129.
Author information
Authors and Affiliations
Corresponding author
Additional information
Project supported by the National Natural Science Foundation of China (Nos. 11372201 and 11672196).
Rights and permissions
About this article
Cite this article
Huang, Z., Wang, H., Wang, Q. et al. Micromechanical Modeling of Elastic-Viscoplastic Behavior of Armco-Fe at High Strain Rate. Acta Mech. Solida Sin. 29, 655–662 (2016). https://doi.org/10.1016/S0894-9166(16)30335-4
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S0894-9166(16)30335-4