Abstract
A new strategy for elastic modulus adjustment is proposed based on the element bearing ratio (EBR), and the elastic modulus reduction method (EMRM) is proposed for limit load evaluation of frame structures. The EBR is defined employing the generalized yield criterion, and the reference EBR is determined by introducing the extrema and the degree of uniformity of EBR in the structure. The elastic modulus in the element with an EBR greater than the reference one is reduced based on the linear elastic finite element analysis and the equilibrium of strain energy. The lower-bound of limit-loads of frame structures are analyzed and the numerical example demonstrates the flexibility, accuracy and efficiency of the proposed method.
Similar content being viewed by others
References
Xu, B.Y. and Liu, X.S., Structural Plastic Limit Analysis. Beijing: China Architecture & Building Press, 1985.
Tong, R. and Wang, X., Simplified method based on the deformation theory for structural limit analysis—I. Theory and formulation. International Journal of Pressure Vessels and Piping, 1997, 70(1): 43–49.
Yang, Q., Cheng, Y.G., Zhao, Y.N. and Zhou, W.Y., Limit analysis method based on nonlinear programming and its application. Engineering Mechanics, 2004, 21(2): 15–19.
Chen, L.J., Liu, Y.H., Yang, P. and Cen, Z.Z., Limit analysis of structures containing flaws based on a modified elastic compensation method. European Journal of Mechanics — A/Solids, 2008, 27(2): 195–209.
Hamilton, R. and Boyle, J.T., Simplified lower bound limit analysis of transversely loaded thin plates using generalized yield criteria. Thin-Walled Structures, 2002, 40(6): 503–522.
Marin-Artieda, C.C. and Dargush, G.F., Approximate limit load evaluation of structural frames using linear elastic analysis. Engineering Structures, 2007, 29(3): 296–304.
Yang, L.F., Qiao, Y.P. and Yu, B., Limit Analysis of Arch Bridge by Elastic Compensation based Finite Element Method. Journal of Changsha Communication University, 2008. 24(1): 5–9.
Marriott, D.L., Evaluation of deformation or load control of stress under inelastic conditions using elastic finite element stress analysis. ASME Pressure Vessel Technology Conference, Pittsburgh, Pennsylvania, 1988, 136: 3–9.
Seshadri, R. and Fernando, C.P.D., Limit loads of mechanical components and structures using the GLOSS R-node method. Journal of Pressure Vessel Technology, 1992, 114: 201–208.
Seshadri, R., The generalized local stress strain (GLOSS) analysis—theory and applications. Journal of Pressure Vessel Technology, 1991, 113: 219–227.
Mackenzie, D. and Boyle, J.T., A method of estimating limit loads using elastic analysis, I: simple examples. International Journal of Pressure Vessels and Piping, 1993, 53: 77–85.
Mackenzie, D., Boyle, J.T. and Nadarajah, C., Simple bounds on limit loads by elastic finite element analysis. Journal of Pressure Vessel Technology, 1993, 115: 27–31.
Adibi-Asl, R. and Seshadri, R., Local Limit-Load Analysis Using m β Method. Journal of Pressure Vessel Technology, 2007, 129: 296–305.
Molski, K. and Glinka, G., A method of elastic-plastic stress and strain calculation at a notch root. Material Science Engineering, 1981, 50(2): 93–100.
Gendy, A.S. and Saleeb, A.F., Generalized yield surface representations in the elastic-plastic three-dimensional analysis of frames. Computers & Structures, 1993, 49(2): 351–362.
Author information
Authors and Affiliations
Corresponding author
Additional information
Project supported by the National Natural Science Foundation of China (No. 50768001), the Foundation of New Century Excellent Talents in University (No. NCET-04-0834) and the Guangxi Natural Science Foundation (No. 0728026).
Rights and permissions
About this article
Cite this article
Yang, L., Yu, B. & Qiao, Y. Elastic modulus reduction method for limit load evaluation of frame structures. Acta Mech. Solida Sin. 22, 109–115 (2009). https://doi.org/10.1016/S0894-9166(09)60095-1
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S0894-9166(09)60095-1