Advertisement

Construction and application of quenching critical cooling rate model

  • Tian-liang Fu
  • Ri-qing Wang
  • Zhao-dong Wang
  • Guo-dong Wang
  • Ming-tao Wang
Article

Abstract

Based on exploring quenching mechanism, three types of quenching critical cooling rate models of medium-carbon steel and low-carbon steel and low-alloy construction steel were established, as modified Maynier model, Eldis model and isothermal curve model, respectively. During construction process, regression analysis and Newton interpolation method were used for higher calculated precision. Through comparing and analyzing, the superior one was selected to evaluate the full hardening thickness after quenching. According to hardness analyzing, the deviation between predicted hardness distribution and the experimental value is within 6%.

Key words

medium-carbon steel and low-carbon steel low-alloy construction steel critical cooling rate hardenability 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    PAN Jian-sheng, ZHANG Wei-min. Heat Treatment Mathematic Model and Computer Simulation [J]. Engineering Science of China, 2003, 5(5): 47 (in Chinese).Google Scholar
  2. [2]
    LIU Zhuang, WU Zhao-ji. Numerical Simulation in Heat Treatment Process [M]. Beijing: Science Press, 1996 (in Chinese).Google Scholar
  3. [3]
    Yu A Samoilovich, Nemzer A K Kabakov, E A Chesni Tskaya, et al. Austenitic Steel Phase Mathematical Model [M]. MиTOM, 1979, 9: 12.Google Scholar
  4. [4]
    WU Ji-xun, ZHOU Guang-yu. The Application Technology of Steel’s Hardenability [M]. Beijing: Mechanical Industrial Press, 1994 (in Chinese).Google Scholar
  5. [5]
    Maynier P H, Manager J D, Bastien P. Prediction of Microstructure via Empirical Formulae Based on CCT Diagrams [M]. New York: the Metallurgical Society/AME, 1978.Google Scholar
  6. [6]
    Siebert C A. The Hardenability of Steel [M]. LU Guang-xi, ZHAO Zi-wei, trans. Shanghai: Science and Technology Press, 1984 (in Chinese).Google Scholar
  7. [7]
    FAN Dong-li, WANG Guang-sheng. Heat Treatment Manual [M]. 3rd ed. Beijing: Mechanical Industrial Press, 2001 (in Chinese).Google Scholar
  8. [8]
    Gramge R A, Kiefer S M. Transformation of Austenite on Continuous Cooling and Its Relation to Transformation at Constant Temperature [J]. Trans of ASM 1941, 29: 85.Google Scholar
  9. [9]
    LU Xing. The Foundation of Heat Treatment Engineering [M]. Beijing: Mechanical Industrial Press, 2007 (in Chinese).Google Scholar
  10. [10]
    GUI Zhong-xi. Metallography and Heat Treatment [M]. Beijing: Mechanical Industrial Press, 2006 (in Chinese).Google Scholar
  11. [11]
    HU Guang-li, XIE Xi-wen. heat treatment of Steel (Theory and Techniques) [M]. Xi’an: Northwestern Industrial University Press, 2006 (in Chinese).Google Scholar
  12. [12]
    FAN Dong-li, XU Yue-ming, TONG Xiao-hui. Heat Treatment Technology Data Manual [M]. Beijing: Mechanical Industrial Press, 2006 (in Chinese).Google Scholar
  13. [13]
    WANG Zhao-dong, WANG Guo-dong. Heat Transfer Coefficient of Hot Rolled Strip During Ultra Fast Cooling Process [J]. Iron and Steel, 2006, 41(7): 54 (in Chinese).CrossRefGoogle Scholar
  14. [14]
    YANG Shi-ming, TAO Wen-quan. Heat transfer Theory [M]. Beijing: Higher Education Press, 2001 (in Chinese).Google Scholar

Copyright information

© China Iron and Steel Research Institute Group 2010

Authors and Affiliations

  • Tian-liang Fu
    • 1
  • Ri-qing Wang
    • 2
  • Zhao-dong Wang
    • 1
  • Guo-dong Wang
    • 1
  • Ming-tao Wang
    • 3
  1. 1.The State Key Laboratory of Rolling and AutomationNortheastern UniversityShenyang, LiaoningChina
  2. 2.Productive SectorNorthern Heavy Industries Group Co LtdShenyang, LiaoningChina
  3. 3.Heat Treatment Workshop, Linfen Medium Plate PlantTaiyuan Iron and Steel GroupLinfen, ShanxiChina

Personalised recommendations