Advertisement

Influence of specimen geometry of hot torsion test on temperature distribution during reheating treatment of API-X70

  • Bahman Mirzakhani
  • Shahin Khoddam
  • Hossein Arabi
  • Mohammad Taghi Salehi
  • Seyed Hossein Seyedein
  • Mohammad Reza Aboutalebi
Article

Abstract

The commercial finite element package ANSYSTM was utilized for prediction of temperature distribution during reheating treatment of hot torsion test (HTT) samples with different geometries for API-X70 microalloyed steel. Simulation results show that an inappropriate choice of test specimen geometry and reheating conditions before deformation could lead to non-uniform temperature distribution within the gauge section of specimen. Therefore, assumptions of isothermal experimental conditions and zero temperature gradient within the specimen cross section appear unjustified and led to uncertainties of flow curve obtained. Recommendations on finding proper specimen geometry for reducing temperature gradient along the gauge part of specimen will be given to create homogeneous initial microstructure as much as possible before deformation in order to avoid uncertainty in consequent results of HTT.

Key words

hot torsion test simulation specimen geometry reheating treatment microalloyed steel 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Samuel F H. Modeling of Flow Stress and Rolling Load of a Hot Strip Mill by Torsion Testing [J]. IS1J International, 1989, 29(10): 878.Google Scholar
  2. [2]
    Bia D Q. Effect of Deformation Parameters on the Non-Recrystallization Temperature in Nb-Bearirtg Steels [J]. Metallurgical Transactions A, 1993, 24: 2151.CrossRefGoogle Scholar
  3. [3]
    Carsi M. The Strain Rate as a Factor Influencing the Hot Forming Simulation of Medium Carbon Microalloyed Steels [J]. Materials Science and Engineering A, 1996, 216: 155.CrossRefGoogle Scholar
  4. [4]
    Hodgson P D. The Prediction of the Hot Strength in Steels With an Integrated Phenomenological and Artificial Neural Network Model [J]. Journal of Materials Processing Technology, 1999, 87: 131.CrossRefGoogle Scholar
  5. [5]
    Quispe A. Improved Model for Static Recrystallization Kinetics of Hot Deformed Austenite in Low Alloy and Nb/V Microalloyed Steels [J]. ISIJ International, 2001, 41(7): 774.CrossRefGoogle Scholar
  6. [6]
    Kuc D. Influence of Deformation Parameters and Initial Grain Size on the Microstructure of Austenitic Steels After Hot-Working Processes [J]. Materials Characterization, 2006, 56: 318.CrossRefGoogle Scholar
  7. [7]
    Dieter G. Handbook of Workability and Process Design [M]. New York: Materials Park, 2003.Google Scholar
  8. [8]
    Tanaka T. Formation Mechanism of Mixed Austenite Grain Structure Accompanying Controlled-Rolling of Niobium-Bearing Steel [C] // Proceedings of International Conference on Thermomechanical of Microalloyed Austenite. New York: Marcel Dekker, 1981: 195.Google Scholar
  9. [9]
    Yoshie A. Modelling of Microstructural of Steel Plates Produced by Evolution and Mechanical Properties Thermo-Mechanical Control Process [J]. ISIJ International, 1992, 32(3): 395.CrossRefGoogle Scholar
  10. [10]
    Flores O. Abnormal Grain Growth of Austenite in a V-Nb Microalloyed Steel [J]. Journal of Materials Science, 1997, 32: 5985.CrossRefGoogle Scholar
  11. [11]
    Fernandez A. Static Recrystallization Mechanisms in a Coarse-Grained Nb-Microalloyed Austenite [J]. Metallurgical and Materials Transactions A, 2002, 33: 3089.CrossRefGoogle Scholar
  12. [12]
    Oudin A. Grain Size Effect on the Warm Deformation Behavior of a Ti-IF Steel [J]. Materials Science and Engineering A, 2004, 367: 282.CrossRefGoogle Scholar
  13. [13]
    Zhou M. Thermal Analysis of the Torsion Test Under Hot-Working Condition [J]. Computational Materials Science, 1998, (9): 411.CrossRefGoogle Scholar
  14. [14]
    Njiwa R K. Effect of Self Heating on the Torque vs Equivalent Tensile Strain Plot in High Temperature Torsion of Visco-Plastic Material [J]. Journal of Materials Science, 2001, 36: 5659.CrossRefGoogle Scholar
  15. [15]
    Khoddam S. Conversion of the Hot Torsion Test Results Into Flow Curve With Multiple Regimes of Hardening [J]. Journal of Materials Processing Technology, 2004, 153: 839.CrossRefGoogle Scholar
  16. [16]
    Speidel M. User Guide of OS550/OS550-BB Series Industrial Infrared Thermometer/Transmitter [M]. New York: Marcel Dekker, 1990.Google Scholar
  17. [17]
    Khoddam S. Thermo-Mechanical Rigid Viscoplastic FE Analysis of the Hot Torsion Test for Determining Constitutive Parameters [D]. Canberra: Monash University, 1997.Google Scholar
  18. [18]
    Holman J P. Heat Transfer [M]. Boston: McGraw-Hill, 2002.Google Scholar
  19. [19]
    Khoddam S. The Effect of Specimen Geometry on the Accuracy of the Constitutive Equation Derived From the Hot Torsion Test [J]. Steel Research, 1995, 66(2): 45.CrossRefGoogle Scholar
  20. [20]
    Shigley J E. Mechanical Engineering Design [M]. Boston: McGraw-Hill, 1983.Google Scholar

Copyright information

© China Iron and Steel Research Institute Group 2010

Authors and Affiliations

  • Bahman Mirzakhani
    • 1
  • Shahin Khoddam
    • 2
  • Hossein Arabi
    • 3
  • Mohammad Taghi Salehi
    • 3
  • Seyed Hossein Seyedein
    • 3
  • Mohammad Reza Aboutalebi
    • 3
  1. 1.Faculty of EngineeringArak UniversityArakIran
  2. 2.Department of Mechanical EngineeringMonash UniversityVicAustralia
  3. 3.Department of Materials and Metallurgical EngineeringIran University of Science and TechnologyTehranIran

Personalised recommendations