Advertisement

Theoretical and experimental research on rolling force for rail hot rolling by universal mill

  • Yong-gang Dong
  • Wen-zhi Zhang
  • Jian-feng Song
Article

Abstract

For rail rolling by universal mill, a simplified three-dimensional theoretical model was built firstly. The kinematically admissible velocity field of the web, head, and base of rail was determined respectively; moreover, the corresponding strain rate field and the strength of shear strain rate were obtained. Then, the plastic deformation power of corresponding deformation zone, the power consumed on the velocity discontinuity surface, and the power generated by backward slip and forward slip were proposed. According to the upper-bound method, the rolling force of horizontal roll and two vertical rolls could be obtained. For verifying the theoretical model, the universal rolling experiments of 18 kg/m light rail was accomplished in Yanshan University Rolling Laboratory, and the experimental data of 60 kg/m heavy rail universal rolling were obtained from the Anshan Iron and Steel Group Corporation. Compared with the experimental data, the theoretical results of rolling force for 18 kg/m light rail and 60 kg/m heavy rail universal rolling were somewhat greater than experimental data, but in general did not exceed them by 15%. Thus, the simplified model was reliable and feasible for presetting and optimizing the parameters of rolling technology according to the upper-bound method.

Key words

rail rolling universal mill upper-bound method rolling force experiment 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Flajimi Faxiqike. The Foreign Heavy Machinery [M]. PANG Gan-yun. Trans. Fulaerji: North-East Heavy Machinery College. 1983 (in Chinese).Google Scholar
  2. [2]
    ZHANG Wen-zhi, ZHU Chun-qing, Widera G E O. On the Use of the Upper-Bound Method for Load Determination in H-Beam Rolling [J]. J Mater Process Technol, 1996, 56(3): 820.CrossRefGoogle Scholar
  3. [3]
    Kiuchi Manabu, Yanagimoto Jun. Computer Aided Simulation of Universal Rolling Processes [J]. ISIJ Int, 1990, 30(2): 142.CrossRefGoogle Scholar
  4. [4]
    Iguchi T, Hayashi H, Yarita I. Stress Analysis of H-Beam Universal Rolling by Rigid-Plastic FEM [C] // Victor H Reis. 1st International Conference on Modeling of Metal Rolling Processes. London: Imperial College, 1993: 707.Google Scholar
  5. [5]
    XIONG Shang-wu, LIU Xing-hua. There-Dimensional Thermo-Mechanical Finite Element Simulation of the Vertical-Horizontal Rolling Process [J]. J Mater Process Technol, 2001, 110(4): 89.Google Scholar
  6. [6]
    WANG Zhong-ren. The Mechanical Base of Plastic Working [M]. Beijing: Defence Industry Press, 1989 (in Chinese).Google Scholar
  7. [7]
    Lee Y, Choi S. New Approach for the Prediction of Stress Free Surface Profile of a Workpiece in Rod Rolling [J]. ISIJ Int, 2000, 40(6): 624.CrossRefGoogle Scholar
  8. [8]
    Lee Y, Choi S, Kim Y H. Mathematical Model and Experimental Validation of Surface Profile of a Workpiece in Round-Oval-Round Pass Sequence [J]. J Mater Process Technol, 2000, 108 (6): 87.CrossRefGoogle Scholar
  9. [9]
    Lee Y, Kim H J, Hwang S M. Analytical Model for the Prediction of Mean Effective Strain in Rod Rolling Process [J]. J Mater Process Technol, 2001. 114(10): 114.CrossRefGoogle Scholar
  10. [10]
    Lee Y. An Analytical Study of Mean Roll Radius in Rod Rolling [J]. ISIJ Int. 2001, 41(11): 1414.CrossRefGoogle Scholar
  11. [11]
    DONG Yong-gang, ZHANG Wen-zhi, SONG Jian-feng. A New Analytical Model for the Calculation of Mean Roll Radius in Round-Oval-Round Alloy Bar Rolling [J]. ISIJ Int, 2006, 46(10): 1458.CrossRefGoogle Scholar
  12. [12]
    DONG Yong-gang. ZHANG Wen-zhi, SONG Jian-feng. A Novel Approach for the Prediction of Surface Profile of Outgoing Workpiece and the Calculation of Mean Roll Radius in Alloy Bar Rolling [J]. Acta Metallurgica Sinica (English Letters), 2007, 20(1): 49.CrossRefGoogle Scholar
  13. [13]
    BAI Guang-run. The Pass Design of Structural Sections [M]. Beijing: Metallurgical Industry Press, 1995 (in Chinese).Google Scholar
  14. [14]
    XUE Yi-de, GAO Chun. The Press Working of Special Steel [M]. Beijing: Metallurgical Industry Press, 2000 (in Chinese).Google Scholar
  15. [15]
    CAO Hong-de. The Mechanical Foundation of Plastic Processing [M]. Beijing: Mechanical Industry Press, 1981 (in Chinese).Google Scholar
  16. [16]
    SHANG Jin. Finite Element Simulation and Technological Analysis of 60 kg/m Rail Hot Rolling [D]. Beijing: University of Science and Technology Beijing, 2001 (in Chinese).Google Scholar
  17. [17]
    ZHOU Ji-hua. GUAN Ke-zhi. The Resistance of Plastic Deformation for Metals [M]. Beijing: Metallurgical Industry Press, 1989 (in Chinese).Google Scholar

Copyright information

© China Iron and Steel Research Institute Group 2010

Authors and Affiliations

  1. 1.College of Mechanical EngineeringYanshan UniversityQinhuangdao, HebeiChina
  2. 2.College of Eletromechanical EngineeringHarbin Institute of TechnologyHarbin, HeilongjiangChina

Personalised recommendations