Advertisement

Modeling and optimization for piercing energy consumption

  • Dong Xiao
  • Xiao-li Pan
  • Yong Yuan
  • Zhi-zhong Mao
  • Fu-li Wang
Article

Abstract

Energy consumption is an important quality index in the production of seamless tubes. The complex factors affecting energy consumption make it difficult to build its mechanism model, and optimization is also very difficult, if not impossible. The piercing process was divided into three parts based on the production process, and an energy consumption prediction model was proposed based on the step mean value staged multiway partial least square method. On the basis of the batch process prediction model, a genetic algorithm was adopted to calculate the optimum mean value of each process parameter and the minimum piercing energy consumption. Simulation proves that the optimization method based on the energy consumption prediction model can obtain the optimum process parameters effectively and also provide reliable evidences for practical production.

Key words

seamless tube piercing energy consumption mean value staged multiway partial least square method genetic algorithm 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Cavaliere M, Goldschmit M, Dvorkin E. Finite Element Analysis of Steel Rolling Processes [J]. Computers and Structures, 2001, 79(2): 2075.CrossRefGoogle Scholar
  2. 2.
    WANG Bei-ming. Quality of Hot-Rolled Steel Tube [M]. Beijing: Metallurgical Industry Press, 1987 (in Chinese).Google Scholar
  3. 3.
    PANG Yu-hua, ZHOU Zhong-min, CHENG You-yi. Influence of Plug Configuration on Wall-Thickness Uniformity and Energy Consumption During Shell Piercing [J]. Steel, 1991, 41 (5): 48.Google Scholar
  4. 4.
    Chiang Leo H, Leardi Riccardo, Pell Randy J. Industrial Experiences With Multivariate Statistical Analysis of Batch Process Data [J]. Chemometrics and Intelligent Laboratory Systems, 2006, 81(4): 109.CrossRefGoogle Scholar
  5. 5.
    Zhang Yale, Dudzic Michael. Industrial Application of Multivariate SPC to Continuous Caster Start-up Operations for Breakout Prevention [J]. Control Engineering Practice, 2006, 14 (11): 1357.CrossRefGoogle Scholar
  6. 6.
    Leea Dae Sung, Parka Jong Moon. Adaptive Multiscale Principal Component Analysis for On-Line Monitoring of a Sequencing Batch Reactor [J]. Journal of Biotechnology, 2005, 116 (3): 195.CrossRefGoogle Scholar
  7. 7.
    Chen Jung-hui, Chen Hsin-Hung. On-Line Batch Process Monitoring Using MHMT-based MPCA [J]. Chemical Engineering Science, 2006, 61(5): 3223.CrossRefGoogle Scholar
  8. 8.
    LI Lian-shi. Steel Tube Plastic Deformation Theory [M]. Beijing: Metallurgical Industry Press, 1985 (in Chinese).Google Scholar
  9. 9.
    LI Yuan, WANG Gang. A Study on Dynamic Time Warping [J]. Journal of Shenyang Institute of Chemical Technology, 2002, 16(1): 44 (in Chinese).Google Scholar
  10. 10.
    Holland J H. Adaptation in Natural and Artificial Systems [M]. Michigan; The University of Michigan Press, 1975.Google Scholar

Copyright information

© China Iron and Steel Research Institute Group 2009

Authors and Affiliations

  • Dong Xiao
    • 1
  • Xiao-li Pan
    • 1
    • 2
  • Yong Yuan
    • 1
  • Zhi-zhong Mao
    • 1
  • Fu-li Wang
    • 1
  1. 1.Key Laboratory of Process Industry Automation of Ministry of Education and Liaoning ProvinceNortheastern UniversityShenyang, LiaoningChina
  2. 2.BaoSteel CorporationShanghaiChina

Personalised recommendations