Abstract
A geometric approach to Sundman infinitesimal time-reparametrisation is given and some of its applications are used to illustrate the general theory. Special emphasis is put on geodesic motions and systems described by mechanical type Lagrangians. The Jacobi metric appears as a particular case of a Sundman transformation.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
An infinitesimal time reparametrisation, usually called Sundman transformation [1], was introduced when looking for an analytic solution to the three-body problem. Such transformation is very intriguing, at least from a geometric perspective, but it allowed to find solutions for many different problems in the theory of differential equations and related physical problems. For instance it has been very useful in problems of linearisation of differential equations or to regularise some equations of motion and avoid collision singularities. More generally, to transform a given equation into another of some appropriate form.
Even if in the early days of the beginning of the nineteenth century the methods developed for studying differential equations were of an ad hoc character, after the pioneer work by Lie on symmetry methods, systematic approaches have been developed, most of them based on a geometric theory of differential equations and dynamical systems. The geometric approach is intrinsic and the results do not depend on a particular choice of coordinates and may be generalised to infinite dimensional systems (with some topological difficulties).
Within this approach, an autonomous system of first order differential equations is replaced by a vector field X on a differentiable manifold M, the system being used to compute, in a local coordinate system, the integral curves of the vector field. But the time is not explicitly appearing in the expression of the vector field and only appears as the parameter of such integral curves, and therefore the geometric interpretation of an infinitesimal change of time is not clear. It will be shown that the infinitesimal time reparametrisation can then simply be understood as a change of the dynamical vector field X, replacing it by a conformally related one, \(f\, X\), where f is a nonvanishing real function on the manifold M.
The existence of compatible geometric structures on M provided by special tensor fields has been shown to be very efficient to establish and study hidden properties of the given system of differential equations and its solutions. This is the main reason for the usefulness of Sundman transformations, because the tensor fields invariant under \(f\, X\) are not, in general, invariant under X.
The aim of this paper is to investigate from a geometric perspective the meaning of such infinitesimal time reparametrisation, to relate it with changes in the vector field describing the dynamical system, as well as to point out many of its applications. Section 2 is devoted to first recall the classical Sundman transformation and, as an example of its applications, to show its use in the linearisation of the Kepler problem, and then to introduce, from a geometric perspective, a concept of generalised Sundman transformation for systems of first-order differential equations. Section 3 points out some possible applications in mathematics and classical mechanics.
The corresponding generalisation of Sundman transformation for systems of second-order differential equations is not so easy and we restrict ourselves in this article to the case of those derivable from a variational principle. Therefore, as we also aim to study this generalised Sundman transformation in the framework of Riemannian manifolds, in order to the paper be self contained, we recall in Sect. 4 the main definitions and properties to be used in the geometric study of such transformation, and in particular the conformal equivalence relation in the set of Riemanniant metrics is explicitly given. A brief overview of symplectic geometry and Lagrangian formalism is presented to introduce some additional notation.
The rest of the paper is devoted to different applications in geometry and mechanical systems. In Sect. 5, we describe geodesics and free motions in a Riemannian manifold and the relation with geodesic vector fields and the effect of a Sundman transformation on the set of geodesic curves, while Sect. 6 is devoted to mechanical and Newtonian systems in a Riemannian manifold. In both cases we solve the question of the relation between two vector fields whose integral curves are related by a time reparametrisation.
In Sect. 7 we take a different approach. Instead of changing the vector field, we change the metric on the manifold to a conformally related one in order to obtain some specific properties of the vector field of a mechanical system or its trajectories. In particular we obtain in a new fashion, related to a Sundman transformation, the well known Jacobi metric. Different relations between the Jacobi metric and the Hamilton–Jacobi equation for a Newtonian system are briefly commented in Sect. 8.
As usually in this kind of geometric papers, all the manifolds and mappings are assumed to be of \({{\mathcal {C}}}^{\infty }\) class.
2 Sundman Transformation
The classical Sundman transformation [1] introduced to regularise the equations of motion and avoid collision singularities (see also [2]), which had previously been used by Levi-Civita [3, 4], was shown to be useful in many other situations and can be generalised and extended to other more general cases. For instance the classical paper by Bohlin [5] used a similar relation to define the Keplerian anomaly. Moreover, Sundman transformation can be used in the study of linearisation of differential equations [6] and in numerical solution of systems of differential equations (see e.g. [7,8,9,10,11]).
The classical Sundman transformation is an infinitesimal scaling of time from the time t to a new fictitious time \(\tau \) given by
where r is the radial distance in the plane, which was later on generalised to \(dt= c\,r^\alpha \, d\tau \), where \(c\in \mathbb {R}\) and \(\alpha \) is a positive constant [9], or more generally to \(dt= f(r)\, d\tau \) [12,13,14].
2.1 An Illustrative Example
We next present an explicit example of application of the transformation (2.1) in the Kepler problem. It is well known that the motion of a particle under a central force takes place in a plane and we can restrict our study to such a plane. Using the standard polar coordinates the Lagrange function for a \(m=1\) particle is given by
and as the angular variable \(\theta \) is cyclic, the Euler–Lagrange equation for such variable shows that the corresponding (angular) momentum \(\ell =r^2\,{\dot{\theta }}\) is constant. The other Euler–Lagrange equation, \(\ddot{r}=r\,{\dot{\theta }}^2-V'(r)\), reduces, using the constant of motion \(\ell \), to the equation of motion of the particle in \((0,\infty )\) under the action of the reduced potential \(\mathcal {V}(r)=V(r)+\ell ^2/(2r^2)\), i.e. in the case of Coulomb–Kepler problem for which \(V(r)=-k/r\), the radial equation of motion is
The conserved energy is given by
and when we introduce the eccentric anomaly parameter \(\tau \) by the classical Sundman transformation (2.1), then we get
where derivatives with respect to \(\tau \) of a function f are denoted by \(f^\prime \) instead of \(\dot{f}\). The differential equation (2.2) becomes
and simplifying
But the expression of the energy (2.3) can now be rewritten as
and therefore we see that for motions with a fixed energy E, the equation (2.6) reduces to
which is an inhomogeneous linear second order differential equation with constant coefficients, whose general solution is easily found. This shows that Sundman transformation (2.1) provides a linearisation of the motion equation for the Kepler problem with a fixed energy E.
For instance, when the energy is negative and the angular momentum is different from zero, the solutions are ellipses given by [15]
where A is the major semiaxis and
2.2 Generalised Sundman Transformation and Geometric Approach
The important point is that even if this classical Sundman transformation (2.1) was carried out for the second order differential equations of motion, it admits a generalisation to the case of systems of first-order differential equations and, moreover, its geometric interpretation is more clear. Recall that a second-order differential equation vector field in Q can be seen (see Sect. 4.3) as a particular case of vector fields on TQ, and therefore it is enough to consider, for the time being, Sundman transformations for autonomous systems of first-order differential equations.
As indicated in [16], given an autonomous system of first order differential equations
we can consider the generalisation of Sundman transformation defined by
and then (2.11) becomes
Let us first remark that when each one of the integral curves of a vector field X is arbitrarily reparametrised we obtain a new family of curves which may be, or not, the integral curves of a vector field Y. In the affirmative case, as the two vector fields have the same local constants of motion, they generate the same 1-dimensional distribution and, at least locally, there exists a nonvanishing function h such that \(Y=h\, X\). Let us prove that this is the case if we consider the reparametrisation defined by a Sundman transformation and then h coincides with the the function f defining the transformation (2.12).
In fact, if \(\gamma (t)\) is a given curve and we carry out the reparametrisation for which the new parameter \(\tau \) is defined by the relation (2.12) written as
we obtain the reparametrised curve \({\bar{\gamma }}(\tau )\) such that \({\bar{\gamma }}(\tau (t))=\gamma (t)\) and then
and consequently, if the curve \(\gamma (t)\) is an integral curve of X, i.e. \(d\gamma /dt=X_{\gamma }\), then
i.e. the curve \({\bar{\gamma }}\) is an integral curve of the vector field \(f\, X\).
From the geometric viewpoint the solutions of the system (2.11) provide us the integral curves of the vector field \(X=X^i(x^1,\ldots ,x^n)\partial /\partial {x^i}\) and then the solutions of the new system (2.13) provide the integral curves of the vector field \(f\, X\). In other words, the effect of the generalised Sundman transformation (2.12) is the replacement by the vector field \(f\, X\) instead of X [17]. But the integral curves of the vector fields \(X\in {\mathfrak {X}}(M)\) and \(f\,\,X\in {\mathfrak {X}}(M)\) coincide up to respective reparametrisations, because both vector fields have the same local constants of motion.
Equivalently, the reparametrisation defined by Sundman transformation (2.14) should be carried out for each orbit, i.e. as pointed out in [18], if x(t) is a solution of (2.11), then we consider the reparametrisation defined by
and the inverse expression \(t=\varphi (\tau )\), and then \(x(\varphi (\tau ))\) is a solution of (2.13).
It is noteworthy that the ‘velocity’ with respect to the new time is different and so the new velocity \({\bar{v}}\) is related to the old one by \({\bar{v}}^i=f\, v^i\), as a consequence of (2.14).
The reinterpretation of this ‘infinitesimal time scaling’ was used in [19] to deal with the theory described by Bond and Janin in [20] in satellite theory. By appropriately selecting the function f, a problem with singular solutions can be transformed into a related one with globally defined solutions in terms of the new time variable.
3 Applications in Mathematics and Classical Mechanics
Let us first remark that even if the vector fields X and \(f\,X\) on a manifold M, with f a nonvanishing function, usually called conformally related vector fields, have the same local constants of motion, the same property does not hold for general tensor fields T, because \(\mathcal {L}_{f\,X}T\ne f\, \mathcal {L}_{X}T\) and this fact is quite important because it provides us a way for obtaining, from a vector field X that does not preserve T, vector fields under which a given tensor field T is invariant.
We have shown before how the classical Sundman transformation (2.1) provides a method to linearise the equations of motion for a given energy in the Kepler–Coulomb problem. Recall that a manifold M can be endowed with a linear structure (see [21], Chapter 3) if there exists a complete vector field \(\Delta \), playing the rôle of Liouville vector field, with only one non-degenerate critical point and such that \(\mathcal {F}_\Delta ^{(0)}=\mathbb {R}\) and \(\mathcal {F}_\Delta ^{(1)}\) separates derivations, where \(\mathcal {F}_\Delta ^{(k)}\) denotes the set of functions on the manifold M defined by
Linear functions (with respect to such a linear structure) are those \(f\in \mathcal {F}(M)\) satisfying that \( \mathcal {L}_{\Delta }f=f\), that is, the elements of \(\mathcal {F}_\Delta ^{(1)}\), and linear vector fields \(X\in {\mathfrak {X}}(M)\) are those preserving the \(\mathbb {R}\)-linear subspace of linear functions, that is, satisfying \( \mathcal {L}_{X}(\mathcal {F}_\Delta ^{(1)})\subset \mathcal {F}_\Delta ^{(1)}\), or what is equivalent, \( \mathcal {L}_{X}\Delta =[X,\Delta ]=0\).
Then, given a nonlinear vector field X such that \( \mathcal {L}_{X}\Delta \ne 0\), it may exists a positive function \(f\in C^\infty (M)\) such that \(\mathcal {L}_{f\,X}\Delta =0\), because \(\mathcal {L}_{f\,X}\Delta =[f\, X,\Delta ]=f\,[X,\Delta ]- \Delta (f)\, X\). This happens when there exists a function h such that \([X,\Delta ]=h\,X \) and we choose the function f in such a way that \(h=\Delta (\log f)\).
In the case of M being a n-dimensional manifold, a chart \((U,\varphi )\) of M identifies U with an open set of \(\mathbb {R}^n\), and this one, as a linear space, is endowed with the complete vector field \(\Delta ={\sum _{i=1}^n}x^i\,\partial /\partial x^i\), where \(x^i\) are the usual coordinates, and therefore, if \(X={\sum _{i=1}^n}X^i(x)\, \partial /\partial x^i\) is the coordinate expression of the vector field X in the mentioned chart, then we can say that the vector field X is linear in this chart when \([\Delta , X] =0\), and taking into account that
we see from \([\Delta , X] =0\) that the components of the vector field X in the given chart are homogeneous of order one functions, i.e. linear functions, \(X^i(x)={\sum _{j=1}^n}A^i\,_j\, x^j\), where \(A^i\,_j\in \mathbb {R}\), and then their integral curves are given by the solutions of the linear system \(\dot{x}^i={\sum _{j=1}^n}A^i\,_j\, x^j\), \(i=1,\ldots ,n\). The vector fields X whose integral curves are given by solutions of inhomogeneous linear systems \(\dot{x}^i={\sum _{j=1}^n}A^i\,_j\, x^j+B^i\), \(i=1,\ldots ,n\), where \(B^i\in \mathbb {R}\), are the sum of a linear vector field \(X_0\) and another one \(X_{-1}\) with components that are homogeneous of degree zero, i.e. constants. Of course as \([\Delta , X_0]=0\) and \([\Delta , X_{-1}]= -X_{-1}\) we have that
and hence,
Conversely, if this last relation holds, then having in mind (3.1) we see that
and therefore, \([\Delta ,[\Delta ,X]]= -[\Delta , X]\) if and only if, for each index \(i=1,\ldots ,n\), \(\Delta ^2(X^i)-\Delta (X^i)=0\), i.e. \(\Delta (X^i)-X^i\) is a homogeneous function of order zero, because there exist constants \(B^i\) such
from where we find that \(X^i={\sum _{j=1}^n}A^i\,_jx^j+B^i\), for each index \(i=1,\ldots ,n\). Without using local coordinates, we observe that \([\Delta , [\Delta , X]]=-[\Delta , X]\) implies that the components of the vector field \([\Delta , X]\) are homogeneous functions of order zero, i.e. is a vector field with constant components, i.e., X is if the form \(X=X_0+X_{-1}\).
We can summarise the preceding results as follows:
Theorem 3.1
Let M be a differentiable manifold endowed with a linear structure \(\Delta \). If X is a vector field in M, then:
-
1.
\(\mathcal {L}_{\Delta }X=h\, X\), for some function h, if and only if there exists a nonvanishing positive function f such that the vector field fX satisfies \(\mathcal {L}_{\Delta }(fX)=0\).
-
2.
\(\mathcal {L}_{\Delta }X=0\) if and only if for any coordinate system \((U,\varphi )\), where \(\varphi =(x^{1},\ldots ,x^{n})\), such that \(\left. \Delta \right| _{U}={\sum _{i=1}^nx^{i}\frac{\partial }{\partial x^{i}}}\), the local expression of X is linear in \(x^{i}\), that is,
$$\begin{aligned} \left. X\right| _{U}=\sum _{i,j=1}^nA^i\,_j\, x^{j}\frac{\partial }{\partial x^{i}}, \quad A^i\,_j\in \mathbb {R}. \end{aligned}$$ -
3.
\(\mathcal {L}_{\Delta }^{2}X=-\mathcal {L}_{\Delta }X\) if and only if for any coordinate system \((U,\varphi =(x^{1},\ldots ,x^{n}))\) such that \(\left. \Delta \right| _{U}={\sum _{i=1}^n }x^{i}\frac{\partial }{\partial x^{i}}\), the local expressión of X is affine in \(x^{i}\), that is,
$$\begin{aligned} \left. X\right| _{U}=\sum _{i=1}^n\left( \sum _{j=1}^nA^i\,_j\, x^{j}+B^i\right) \frac{\partial }{\partial x^i}, \quad A^i\,_j,B^i\in \mathbb {R} . \end{aligned}$$
\(\square \)
Comment: This theorem gives us a characterisation of the vector fields X that are linearisable with respect to a general linear structure \(\Delta \) in a manifold M, by means of a general Sundman transformation.
As another instance of application of Sundman transformations, if \((M,\Omega )\) is an oriented manifold, i.e. \(\Omega \) is a volume form in M, and a vector field \(X\in {\mathfrak {X}}(M)\) is such that \(\mathcal {L}_X\Omega \ne 0\), there may be a positive function \(f\in C^\infty (M)\) such that \(\mathcal {L}_{f\,X}\Omega =0\): these functions are called Jacobi multipliers [22] and play a relevant rôle in the process of integrability by quadratures. Note that as \(\mathcal {L}_{f\,X}\Omega =\mathcal {L}_{X}(f\,\Omega )\), the search of such a Jacobi multiplier is equivalent to the determination of a X-invariant volume form \(f\,\Omega \). For examples of applications of Jacobi multipliers in integrability and the inverse problem of mechanics see e.g. the recent review paper [23] and references therein.
Another possibility would be to consider a Riemannian structure on the manifold M given by a non-degenerate symmetric two times covariant tensor field g and then, as \(\mathcal {L}_{f\,X}g\ne f\,\mathcal {L}_Xg\), some non-Killing vector fields X, i.e such that \(\mathcal {L}_Xg\ne 0\), can give rise to Killing ones by just multiplication by a convenient function f.
Similarly, given a closed 2-form on a manifold, for instance a symplectic form \(\omega \), that may be not invariant under the vector field X, i.e. \(\mathcal {L}_{X}\omega \ne 0\), if there is a positive function f such that \(\mathcal {L}_{f\,X}\omega =0\), i.e. \(f\,i(X)\omega \) is a closed form, then, when the non-degeneracy condition \(df\wedge \omega =0\) is satisfied, the 2-form \(f\,\omega \) is symplectic and the vector field X is locally-Hamiltonian with respect to such symplectic form \(f\,\omega \). Recall that in the case of X being also locally-Hamiltonian with respect to the original symplectic form \(\omega \), such function f must be a constant of motion for X, \(Xf=0\) (see [24]).
The same can be said about skew-symmetric two times contravariant tensor fields, i.e. bivector fields \(\Lambda \), and a particularly interesting case is that of Poisson structures, i.e. such that \([\Lambda ,\Lambda ]_{\text {S}}=0\), where \([\cdot ,\cdot ]_{\text {S}}\) denotes the Schouten bracket [25, 26]. Recall that in this case
defines a Poisson bracket and vector fields \(X_f\) on M of the form \(X_fg=\{g,f\}\) are said to be Hamiltonian vector fields. Then given a vector field X and a Poisson structure \(\Lambda \) sometimes there exists a function f such that fX is Hamiltonian with respect to the Poisson structure \(\Lambda \). In this way an infinitesimal Sundman time-reparametrisation can transform a given vector field into a Hamiltonian one. This is usually called Hamiltonization process [27, 28].
4 Digression on Some Geometric Complements
The applications of the Sundman transformation for systems of second-order differential equations we will develop in next sections cover different topics, going from minimal length curves to systems of a mechanical type and from the geodesic vector fields to the Jacobi metric. This is why we need to extend our standpoint and formulate the Sundman transformation in a different framework, that of a Riemannian manifold.
We begin with a short review of the concepts of Riemannian geometry we will need, some comments on conformally related metrics and some ideas on the tangent bundle and second-order differential equation vector fields in the case of Lagrangian systems and systems of a mechanical type. The remaining sections are devoted to a detailed study of different applications using these topics.
4.1 A Quick Survey of Riemannian Geometry
In order to the paper be self-contained, this Subsection is devoted to recall well known concepts and properties in geometry and also to establish the notation to be used. The results can be found in many classical books on Riemann geometry (see e.g. [29] and [30] for more details).
A (pseudo-)Riemann manifold (M, g) is a pair given by a differentiable manifold M, \(\dim M=n\), and a non-degenerate symmetric two times covariant tensor field g on M. Nondegeneracy means that the map \({\widehat{g}}:TM\rightarrow T^*M\) from the tangent bundle, \(\tau _M:TM\rightarrow M\), to the cotangent bundle, \(\pi _M:T^*M\rightarrow M\), defined by \(\langle {\widehat{g}}(v),w\rangle =g(v,w)\), where \(v,w\in T_xM\), is a regular vector bundle map, that is, a vector bundle isomorphism. As the map \(\,{\widehat{g}}\,\) is a fibred map over the identity on M, it induces the corresponding map between the \(C^\infty (M)\)-modules of sections of the tangent and cotangent bundles, to be denoted by the same letter \(\widehat{g}:{\mathfrak {X}}(M)\rightarrow \bigwedge ^1(M)\): \(\langle {\widehat{g}}(X),Y\rangle =g(X,Y)\). Given a local chart \((U,q^1,\ldots ,q^n)\) on M we can consider the coordinate basis of \({\mathfrak {X}}(U)\) usually denoted \(\{\partial /\partial q^j\mid j=1,\ldots ,n\}\) and its dual basis for \(\bigwedge ^1(U)\), \(\{dq^j\mid j=1,\ldots ,n\}\). Then a vector v in a point \(q\in U\) is \(v={\sum _{j=1}^n}v^j\,(\partial /\partial q^j)_{|q}\) and a covector \(\zeta \) in such a point is \(\zeta ={\sum _{j=1}^n}p_j\,(dq^j)_{|q}\), with \(v^j=\langle dq^j,v\rangle \) and \(p_j=\langle \zeta ,\partial /\partial q^j\rangle \) being the usual velocities and momenta. The local expression for g in the open set U is
and therefore the arc-length of a curve \(\gamma \) in M, \(\gamma (t)=(q^1(t),\ldots , q^n(t))\), between the points \(\gamma (t_1)\) and \(\gamma (t_2)\) is given by
i.e. the classical local expression for the arc-length ds is given by
Given \(q_1,q_2\in M\), the extremal length curves in (M, g) from \(q_{1}\) to \(q_{2}\) are the curves \(\gamma :[t_1,t_2]\rightarrow M, \gamma (t_1)=q_1,\gamma (t_2)=q_2\), such that the integral (4.2) is extremal among all the curves going from \(q_{1}\) to \(q_{2}\). Such curves will be studied in Sect. 5.1.
Recall that a linear connection \(\nabla \) in a manifold M is a map \(\nabla :{\mathfrak {X}}(M)\times {\mathfrak {X}}(M)\rightarrow {\mathfrak {X}}(M)\), such that if \(X,Y,Z\in {\mathfrak {X}}(M)\), \(f\in C^\infty (M)\) and \(\nabla _XY\) denotes \(\nabla _XY=\nabla (X,Y)\):
In a local coordinate system the connection symbols \(\Gamma ^i_{jk}\) are defined by
while \(\nabla _XY\) is given by
Moreover, each linear connection has associated a (1, 2) tensor \(\mathbb {T}\), called torsion tensor, which is skewsymmetric in the two last indices and it is defined as follows
and a (1, 3) tensor field called curvature tensor defined by
A Riemann manifold (M, g) is endowed with a uniquely determined torsionless metric connection \(\nabla \), called the Levi-Civita connection. By metric we understand that if \(X,Y,Z\in {\mathfrak {X}}(M)\), then
and by torsionless we mean that the corresponding torsion tensor \(\mathbb {T}\) is null, hence
Such a Levi-Civita connection is given by the so-called Koszul formula:
for every \(X,Y,Z\in {\mathfrak {X}}(M)\). In terms of local coordinates on M Koszul formula gives
and using the definition of connection symbols (usually called second class Christoffel symbols)
Hence, the second class Christoffel symbols are given by
where \({\sum _{j=1}^n}g^{ij} g_{jk}=\delta ^i_k\).
On the other hand, the vanishing of the torsion tensor is equivalent to the following symmetry property of Christoffel symbols: \(\Gamma ^i_{jk}=\Gamma ^i_{kj}\).
As indicated above, these symbols \(\Gamma ^i_{jk}\) locally determine \(\nabla _XY\) for every X, Y, by making use of (4.5). The remarkable fact (see e.g. [29, 30] for details) is that as given a vector field \(Y\in {\mathfrak {X}}(M)\) the value of \(\nabla _XY\) at a point \(x\in M\), \((\nabla _XY)(x)\), only depends, with respect to X, on the value of X in such a point, then for each \(v\in T_xM\) we can define \(\nabla _vY=(\nabla _XY)(x)\), where X is any vector field \(X\in {\mathfrak {X}}(M)\) such that \(X(x)=v\), and then this allows us to introduce the concept of parallelism of a vector field along a curve as follows: A vector field along a curve \(\gamma :I \rightarrow M\), \(Y\in {\mathfrak {X}}(\gamma )\), is parallel along \(\gamma \) if \(\nabla _{{\dot{\gamma }}(t)} {\bar{Y}}=0\), for all \(t\in I\), where \(\bar{Y}\in {\mathfrak {X}}(M)\) is an arbitrary extension to M of Y.
An example of a vector field along a curve \(\gamma \) in M is given by its velocity vector field \({\dot{\gamma }}\in {\mathfrak {X}}(\gamma )\), and the curves whose velocity vector field is parallel along the curve, \(\nabla _{{\dot{\gamma }}(t)}{\dot{\gamma }}(t)=0\), are called geodesics. In particular in a Riemann manifold (M, g) the connection to be considered is its Levi-Civita connection and using this connection \(\nabla \), the geodesics in (M, g) are the curves \(\gamma \) in M satisfying the equation \(\nabla _{\dot{\gamma }}\,{\dot{\gamma }}=0\), where \({\dot{\gamma }}\) is the vector field along \(\gamma \) given by the velocity of the curve at each point. They are uniquely defined from the Riemann metric g through the Levi-Civita connection \(\nabla \), which is uniquely defined by g. Their geometric properties can be studied through the so called second order geodesic vector field defined by g and we will see below the relation with extremal length curves through an appropriate Sundman transformation.
For a curve parametrised by its arc-length s, \(\gamma (s)=(q^{1}(s),\ldots ,q^{n}(s))\), as we have
the local equation of the geodesic lines, \(\nabla _{\dot{\gamma }}\,{\dot{\gamma }}=0\), is the second order differential equation
See Sect. 5.1 for another approach to this equation.
Consequently, the geodesic curves are the projection on the base manifold M of the integral curves of the second order geodesic vector field \(\Gamma \in {\mathfrak {X}}(TM)\) whose local expression is
4.2 Conformal Metrics
We have seen in Sect. 2.2 that the vector fields X and fX on a manifold M have integral curves related by a Sundman transformation. Other interesting problems related to Sundman transformation for second-order differential equation vector fields use conformal Riemannian metrics to study dynamical systems. Two metrics, g and \({\bar{g}}\), are conformally related if there exists a function \(\varphi \) such that \({\bar{g}}=\exp (2\varphi )\, g\). This establishes an equivalence relation in the set of metrics. A conformal structure is an equivalence class of metrics. The covariant derivatives with respect to both metrics g and \({\bar{g}}\) are related by:
To obtain these formulas, consider the Koszul formula for the connection \({\bar{\nabla }}\) that gives
and simplifying the factor \(e^{2\varphi }\), it may be rewritten as
from where, once again by simplification, we obtain
Finally, by making use of
we find
where \({\text {grad}}_g\) is the gradient with respect to the metric g. The above relation can also be rewritten as
Remark that the relation \({\bar{g}}=\exp (2\varphi )\, g\) implies that \({\text {grad}}_{{\bar{g}}}\varphi = \exp (-2\varphi )\,{\text {grad}}_{g}\varphi \).
In the case of \(X=Y\) the expression (4.18) reduces to
It is also interesting to study the relationship between the corresponding Christoffel symbols to both metrics. The new Christoffel symbols of the second kind are [31]:
where \(\delta ^i_k\) denotes Kronecker delta symbol, because
and using Leibniz rule for derivatives and simplifying terms we arrive to (4.21).
There is also an interesting equivalence relation in the set of symmetric linear connections (see e.g. [31] and references therein): two such connections are said to be projectively equivalent when their geodesics differ only by a parametrisation. Each equivalence class is characterised by its Thomas symbol. A projective structure is compatible with a conformal structure if there exists a metric g in its conformal class such the associated Levi-Civita connection is in the equivalence class defining the projective structure. Necessary and sufficient conditions for local compatibility are given in [31].
4.3 Lagrangian Systems
Given a regular Lagrangian (see later on), \(L:TM\rightarrow \mathbb {R}\), L(q, v), defined on the velocity phase space, that is, a function depending on the positions q and velocities v, we can obtain the associated dynamical equations in two different ways. In the traditional one we consider the Hamilton principle, that is, we try to determine the curves q(t) with fixed end-points making extremal the action defined by:
Then, applying the classical variational calculus, the curves we are looking for are solutions to the Euler–Lagrange equations associated to the Lagrangian L:
But the theory of the above systems can be presented more geometrically by means of the symplectic approach to Lagrangian formalism (see e.g [21, 32, 33]). In this approach, from the Lagrangian function L we construct the Cartan 1-form \(\theta _{L}\) given by \(\theta _{L}=d{L}\circ S\), where S is the vertical endomorphism [32, 33] in the tangent bundle TM of the configuration manifold M. Associated to the 1-form \(\theta _{L}\), we have the 2-form \(\omega _{L}=-d\theta _{L}\). These forms are locally given by
If \(\omega _L\) is symplectic, we say that the Lagrangian L is regular. Otherwise L is called singular. In the sequel we suppose that L is regular.
The 2-form \(\omega _L\) has the usual form
with the matrices A and W being given by
The regularity of the Lagrangian depends on the regularity of \({\widehat{\omega }}_{L}\) and, consequently, on the regularity of the matrix W.
On the other side, recall that the energy of the Lagrangian system determined by L is defined by \(E_L=\Delta L - L\), where \(\Delta \in {\mathfrak {X}}(TM)\) is the Liouville vector field, generator of dilations along the fibres of TM, given by
for all \((q,v)\in TM\) and \(f\in C^\infty (TM)\). Hence, as \(\Delta ({L})= {\sum _{j=1}^n}v^{j}{\partial L}/{\partial v^{j}}\), the total energy is \(E_{L}= {\sum _{j=1}^n}v^{j}{\partial L}/{\partial v^{j}}-L\). The corresponding associated dynamics when L is regular is given by the unique dynamical vector field \(\Gamma _{L}\in {\mathfrak {X}}(TM)\) defined by
and since we know the expression of \(E_{L}\), we see that \(\Gamma _{L}\) is of the form
where
with \({\sum _{j=1}^n}W^{ij} W_{jk}=\delta ^i_k\).
The uniqueness of \(\Gamma _{L}\) satisfying equation (4.25) is a consequence of the assumed regularity of the 2-form \(\omega _L\).
The dynamical vector field \(\Gamma _{L}\) is a second order differential equation and the corresponding system of differential equations is
which gives the second order differential equation
In the case of a mechanical type Lagrangian system in the Riemanian manifold (M, g), the Lagrangian is given by \(L=T_{g}-V\) where \(T_{g}\) is the kinetic energy defined by the metric and \(V:M\rightarrow \mathbb {R}\) is the potential energy. The local coordinate expression for the kinetic energy \(T_g\) is
To understand V as a function defined in TM we need to write \(\tau _M^{*}V\). By simplicity we continue writing simply V.
For such kind of systems the Cartan 1-form \(\theta _{T_g}\) given by \(\theta _{T_g}=d{L}\circ S=d{T_g}\circ S\), reduces to \(\theta _{L}(v)={\widehat{g}}(v)=g(v,\cdot )\), which in local coordinates looks as
with associated symplectic form \(\omega _{L}\) given by
Here this 2-form \(\omega _{L}\) is symplectic and consequently the Lagrangian \(L=T_{g}-V\) is a regular Lagrangian as defined above. The matrix of \(\omega _{L}\) is of the form (4.23), but now with
The total energy is \(E_L=T_{g}+V\), hence the dynamical vector field defined as in (4.25) is given by (4.26) with
where use has been made of definition (4.11).
Once again the vector field \(\Gamma _L\) corresponds to a second order differential equation we can write as
where the last term, \(X_V=-{\sum _{i,j=1}^ng^{ji} \frac{\partial V}{\partial q^i}\frac{\partial }{\partial v^j}}=-(\mathrm {grad}\; V)^v\), comes from the external force. Here \(Y^v\) denotes the vertical lift of the vector field \(Y\in {\mathfrak {X}}(M)\) (see e.g. [32, 33]). We are in the usually called case of conservative systems or potential forces.
If \(\mathrm {grad}\; V=0\), the external force vanishes, we say we have a free motion, \(L=T_g\), and then
4.4 General Forces and Newtonian Mechanical Systems
We can consider a more general situation where the external forces are not potential ones. This is the case when the force is given by a non-exact semibasic 1-form \(F\in \bigwedge ^1(TM)\); then the dynamics \(\Gamma \in {\mathfrak {X}}(TM)\) is given by
instead of a free motion whose dynamics \(\Gamma _{T_g}\) is given by \(i(\Gamma _{T_g})\omega _{T_g}=dE_{T_g}\) as we know.
The 1-form F is called the force form or work form and, being semibasic in TM, its local expression is \(F={\sum _{i=1}^n}F_i(q,v)\,dq^i\). When the 1-form F is basic, that is \(F={\sum _{i=1}^n}F_i(q)dq^i\), it does not depend on the velocities, and then the system is said Newtonian. In this last case, given the force form F, then \(X_F={\sum _{i,j=1}^ng^{ij}F_i\frac{\partial }{\partial v^j}}\) is the local expression of the vector field of force which is the vertical lift to TM of the vector field in M, \(Z_F={\widehat{g}}^{-1}F\), i.e. \(X_F=Z_F^v\). The above case of potential forces, with \(L=T_g-V\), is given by \(F=-\tau ^*(dV)\) with \(V:M\rightarrow \mathbb {R}\).
Conversely, we can give a vector field of forces, \(Z\in {\mathfrak {X}}(M)\), with \(Z={\sum _{i,j=1}^n}Z^i\partial /{\partial q^i}\), then \(F_Z=i(Z)g={\sum _{i,j=1}^n}g_{ij}Z^idq^j\) is a 1-form in M and \(\tau ^*F_Z\) is a basic 1-form in TM, the force form associated to the force vector field Z. In this approach the dynamical vector field \(\Gamma \) is given by
where we write \(F_Z\) instead of \(\tau ^*F_Z\) for simplicity. The corresponding second order differential equation for its integral curves is
Furthermore, we can consider the case where the vector field of forces is depending on the velocities \(Z={\sum _{i=1}^n}Z^i(q,v){\partial }/{\partial q^i}\), that is, it is a vector field along the projection \(\tau _M:TM\rightarrow M\). In this case we proceed as above obtaining the 1-form of forces \(F_Z=i(Z)g={\sum _{i,j=1}^n}g_{ij}Z^idq^j\) and thecorresponding expression for the dynamical vector field \(\Gamma \).
In all these situations the dynamical vector field \(\Gamma \) is a second order differential equation with a similar local expression as above.
5 Application to Geodesics, Free Motion and Geodesic Fields
5.1 Curves with Extremal Length
As defined in (4.2), the extremal length curves in (M, g) are those corresponding to the action defined by the Lagrangian \(\ell (v)= \sqrt{g(v,v)} \), even if we have to restrict ourselves to the open submanifold \(T_0M=\{ v\in TM\mid v\ne 0\}\) in order to preserve the differentiability. Remark that the length does not depend on the parametrisation of the curve and consequently a reparametrisation of an extremal length curve leads to another extremal length curve.
Consider, therefore, the Lagrangian \(\ell (v)=\sqrt{2\,{T_g}(v)}\), where \(T_g\in C^\infty (TM)\) is the function defined in (4.29)
usualy called kinetic energy in the context of mechanical systems.
This function \(\ell (v)\in C^\infty (T_0M)\) is a singular Lagrangian that has been studied in [34] in a problem with applications in a geometric approach to optics. This singular character of \(\ell \) is responsible of the fact that a reparametrisation of an extremal length curve gives rise to another extremal length curve.
Being \(\ell \) a singular Lagrangian, the symplectic approach is not directly applicable but we can use the first method and obtain the Euler–Lagrange equations. As \(\ell (q, \dot{q})=\sqrt{g_{ij}(q)\dot{q}^i\dot{q}^j}\), then
and the Euler–Lagrange equations of the Lagrangian \(\ell \) are:
where t is the parameter of the solution curves.
If we parametrise the curves by the arc-lenght s, that is we apply a Sundman transformation, then as \(ds/dt=\ell \), \( \dot{q}^i=\ell \, q^{\prime i} =\ell \,dq^i/ds\), we have that the previous system becomes
i.e.
or in another form,
where \(\Gamma _{jk}^i\) are the Christoffel symbols of the second kind defined by the metric g.
Equation (5.4), which is the same equation as (4.12), is called geodesics’ equation obtained from Euler-Lagrange equations for \(\ell \,\) by the above Sundman transformation. It is to be remarked that the same can be said for a Sundman reparametrisation \(d\tau /dt=a\, \ell \), where \(a\in \mathbb {R}\). This corresponds to the fact that the parameter of geodesic curves is defined up to an affine transformation \(s\mapsto a\, s+b\). See Sect. 5.3 for a reciprocal of this result and some comments on it.
5.2 Free Motions on a Riemann Manifold
Free motion on a Riemann manifold (M, g) is described by a regular Lagrangian given by the function \(T_g\in C^\infty (TM)\), as defined in (4.29), which is the kinetic energy defined by the metric.
We can follow the geometric approach with the Lagrangian \(L=T_g\), which reduces to the kinetic energy and is a regular Lagrangian. The Cartan 1-form \(\theta _{T_g}\) and the symplectic 2-form are given by
The total energy is \(E_{T_g}=T_g\) and the dynamical vector field solution of \(i(\Gamma _{T_g}) \omega _{T_g}=dE_{T_g} \) is
where, as above, \(\Gamma _{jk}^i\) denote the second class Christoffel symbols defined by the metric.
The projected curves on the base manifold of the integral curves of the vector field \(\Gamma _{T_g}\) are solutions of the system of second order differential equations
which is the local expression for \(\nabla _{{\dot{\gamma }}}\,\dot{\gamma }=0\), where \(\gamma \) is a curve in M and \({\dot{\gamma }}\) the vector field along \(\gamma \) given by the velocities of the curve at each point. This shows that the above integral curves are geodesics of the Riemannian structure, and therefore, the geodesic curves \(\gamma \) are such that their tangent prolongations \({\dot{\gamma }}\) are integral curves of \(\Gamma _{T_g}\).
In particular, as indicated above, an extremal length curve parametrised by its arc-length is a solution of
and therefore in terms of such parametrisations the extremal length curves are geodesics of the corresponding metric.
As we will see in Sect. 5.3, if a curve \(\gamma (t)\) satisfies \(\nabla _{{\dot{\gamma }}}{\dot{\gamma }}=0\), then \(g({\dot{\gamma }},{\dot{\gamma }})\) is constant along \(\gamma \), hence the parameter t is a real affine function of the arc-length, that is \(t=as+b\) with \(a,b\in \mathbb {R}\).
5.3 Geodesic Fields and Sundman Transformation
There are distinguished classes of vector fields on a Riemann manifold (M, g). For instance, Killing vector fields X are those such that \(\mathcal {L}_Xg=0\), i.e. vector fields whose local flows are preserving g. Another relevant class is that of autoparallel vector fields, characterised by the property \(\nabla _XX=0\), where \(\nabla \) is the corresponding Levi-Civita connection.
Remark that \(X \in {\mathfrak {X}}(M)\) is an autoparallel vector field if and only if its integral curves \(\gamma \) are geodesics, i.e. they satisfy the equation \(\nabla _{{\dot{\gamma }}}\,\dot{\gamma }=0\), and then when lifted to the tangent bundle TM are integral curves of \(\Gamma _{T_g}\), the second order geodesic vector field given in (4.13) or (5.6). In fact, suppose that \(\nabla _XX = 0\) and let \(\gamma : I \subset \mathbb {R} \rightarrow M\) be an integral curve of X, that is \({\dot{\gamma }} = X \circ \gamma \). Then:
and therefore \(\gamma \) is a geodesic curve in M. If, on the contrary, we suppose that every integral curve of X satisfies the equation \( \nabla _{{\dot{\gamma }} (t)}{\dot{\gamma }}(t) = 0\), let \(p \in M\) and \(\gamma : I \subset \mathbb {R} \rightarrow M\) be the integral curve of X with initial condition p, we have
But as this is true for every \(p \in M\), we have \( \nabla _XX = 0\).
Because of this property the autoparallel vector fields are also called geodesic vector fields [35]. It is to be remarked that for each real number a, if X is a geodesic vector field, then \(a\, X\) is geodesic too.
There exists an even more general class of generalised geodesic vector fields, usually also called pregeodesic vector fields, which are those such that there exists a function f satisfying \(\nabla _XX=f\, X\).
Before going to the application of Sundman transform to these vector fields, we recall some known results with slightly new proofs.
In [36], it is proven, Lemma 3, and in [37] is used, that a Killing vector field \(X \in {\mathfrak {X}}(M)\) has constant length if and only if every integral curve of X is a geodesic, that is, X is a geodesic vector field. We can give a little more general proof:
-
(a)
Using that the connection \(\nabla \) is metric and torsionless, we have on the one hand that for arbitrary vector fields \(X,Y\in {\mathfrak {X}}(M)\),
$$\begin{aligned} \begin{array}{rcl} \mathcal {L}_X(g(X,Y))&{}=&{}(\mathcal {L}_Xg)(X,Y)+g(\mathcal {L}_XX,Y)+g(X,\mathcal {L}_XY)\\ &{}&{}\\ &{}=&{}(\mathcal {L}_Xg)(X,Y)+g(X,\nabla _XY)-g(X,\nabla _YX)\\ &{}&{}\\ &{}=&{}(\mathcal {L}_Xg)(X,Y)+g(X,\nabla _XY)-{\displaystyle \frac{1}{2}}\mathcal {L}_Y(g(X,X)), \end{array} \end{aligned}$$and on the other hand,
$$\begin{aligned} \mathcal {L}_X(g(X,Y))=g(\nabla _XX,Y)+g(X,\nabla _XY)\, . \end{aligned}$$(5.9)Comparing both expressions we have that
$$\begin{aligned} g(\nabla _XX,Y)=(\mathcal {L}_Xg)(X,Y)-\frac{1}{2}\mathcal {L}_Y(g(X,X)). \end{aligned}$$ -
(b)
If \(X=Y\), the expression (5.9) reduces to \(\mathcal {L}_X(g(X,X))=2g(\nabla _XX,X)\) and this relation shows that if X is a geodesic vector field, \(\nabla _XX=0\), then \(\mathcal {L}_X(g(X,X))=0\), that is, the norm of X is constant along the integral curves of X.
-
(c)
Moreover, if X is a Killing vector field, we have that \(g(\nabla _XX,Y)=-(1/2)\mathcal {L}_Y(g(X,X))\), and, consequently, as Y is an arbitrary vector field, we see that then X is a geodesic vector field, i.e. \(\nabla _XX=0\), if and only if g(X, X) is a real constant as we wanted.
A remarkable similar property was proved in [38]: a generalised geodesic vector field X of constant length on a Riemannian manifold is a geodesic vector field, because if \(\varphi \) is the function defined by \(\varphi =\frac{1}{2}g(X,X)\), as \(\nabla _XX=f\, X\), we have that
and equivalently, \(2f= \mathcal {L}_X(\log \varphi )\), which shows that as \(\varphi \) is constant, then \(f=0\), and therefore X is a geodesic vector field.
As a time-reparametrisation of an extremal length curve gives rise to another extremal length curve, we can study the reparametrisation of geodesics curves, which we know are parametrised by the arc-length. If we consider a reparametrisation of a solution of (5.8) with a generic parameter \(\tau \) defined, as a given function of s, by
we have
and the corresponding differential equation (5.8) for geodesics in such a generic parametrisation is
with
that can also be written as
Note that when \(\xi (\tau )\) is a constant a, that corresponds to an affine change of parameter, we obtain from (5.13) that \(\lambda =0\), i.e. (5.12) reduces to the original equation. This corresponds to the case \(\tau =as+b\), wth \(a,b\in \mathbb {R}\), that is, \({\displaystyle \frac{d^2\tau }{ds^2}=0}\), as we commented at the end of Sect. 5.1.
Conversely, a solution of the differential equation (5.12) corresponds to a solution of (5.8) with a reparametrisation defined by (5.10) with \(\xi (\tau )=\exp \left( {\displaystyle \int ^\tau }\lambda (\zeta )\, d\zeta \right) \).
Instead of a reparametrisation (5.10) we can consider a classical Sundman transformation
and then differential equation (5.8) for geodesics becomes
Now we try to obtain the relation between geodesic fields and Sundman transformation in a more geometric way.
If we carry out a Sundman transformation (2.12) in the description of the geodesics of a Riemann manifold (M, g) as integral curves of geodesic vector fields, a geodesic vector field X should be replaced by the vector field \(Y=f\, X\), and then its integral curves are not geodesics because their velocities are not covariantly constant. Actually, from
we see that \(\nabla _XX =0\) implies that \(\nabla _{f\,X}(f\,X) =(Xf)\,(f\,X)\), i.e. \(\nabla _YY =(Xf)Y\). Conversely, the integral curves of a vector field \(X \in {\mathfrak {X}}(M)\) can be reparametrised to be geodesic curves if and only if there exists a function \(f : M \rightarrow \mathbb {R}, \, f > 0\), such that \(\nabla _XX = f\, X\), because in this case, for any function \(\lambda : M \rightarrow \mathbb {R},\, \lambda > 0\), we have
and taking as \( \lambda \) any solution of the differential equation \( \mathcal {L}_X (\log \lambda ) = -f\), we have that \(\nabla _{ \lambda X}( \lambda \, X) = 0\), and then \(\lambda X\) is a geodesic field in M and its integral curves are geodesic ones.
Observe that if \(\nabla _XX = fX\), i.e. X is a generalised geodesic vector field, then \(Y = \lambda X\) with \(\mathcal {L}_X (\log \lambda ) = -f\) is a geodesic vector field.
Summarising, we have proved:
Proposition 5.1
The integral curves of a vector field \(X\in {\mathfrak {X}}(M)\) can be transformed by a Sundman transformation to be geodesic curves if, and only if, the vector field X satisfies \(\nabla _XX=fX\) for some nonvanishing function \(f:M\rightarrow \mathbb {R}\).
6 Applications in Mechanical Systems
6.1 Newtonian Systems and Time Reparametrisation
In this section we study a mechanical Newtonian system determined by a vector field of forces \(Z\in {\mathfrak {X}}(M)\) in the Riemannian manifold (M, g). We know from (4.38) that the corresponding dynamical vector field \(\Gamma \) satisfies the equation
where \(F_Z=i(Z)g\). The integral curves of \(\Gamma \) satisfy the second order differential equation
But a curve \(\gamma :I\subset \mathbb {R}\rightarrow M\) satisfies this equation if and only if it satisfies the following one
as we can prove expressing both equations in coordinates.
We are now interested in studying the properties of vector fields \(X\in {\mathfrak {X}}(M)\) playing the rôle of the geodesic vector fields but in presence of a non-null vector field of forces \(Z\in {\mathfrak {X}}(M)\).
The main result, to be compared with a previous one for the case \(Z=0\), is the following:
Proposition 6.1
Given \(Z\in {\mathfrak {X}}(M)\), the integral curves \(\gamma \) of \(X \in {\mathfrak {X}}(M)\) satisfy the equation \(\nabla _{{\dot{\gamma }}}{{\dot{\gamma }}}= Z \circ {\gamma }\), if and only if the vector field X satisfies the equation \(\nabla _XX = Z\).
Proof
Suppose that the integral curves \(\gamma \) of \(X \in {\mathfrak {X}}(M)\) satisfy the equation \(\nabla _{{\dot{\gamma }}}{{\dot{\gamma }}}= Z \circ {\gamma }\). If p is a point of M and \(\gamma \) is the integral curve of X starting from p, we have:
and as this is valid for any \(p\in M\), then \( \nabla _XX = Z\).
Conversely, if \(\nabla _XX =Z\) and \(\gamma \) is an integral curve of X, that is \({\dot{\gamma }} = X \circ \gamma \), then \((\nabla _XX)( \gamma (t) )= Z( \gamma (t))\), which gives \(\nabla _{\dot{\gamma }(t)}{\dot{\gamma }} (t) = Z(\gamma (t))\). \(\square \)
This result can be particularized to the case \(Z=-\text {grad}\, V\) corresponding to a simple mechanical type system.
The relation with Sundman transformation is the following:
Suppose that the vector field \(X \in {\mathfrak {X}}(M)\) satisfies the equation \(\nabla _XX = Z\) and consider a Sundman reparametrisation of its integral curves, that is, consider the vector field \(Y = h\,X\), with h a function, \(h : M \rightarrow \mathbb {R}, \, h > 0\). Then the corresponding equation for the vector field \(Y = h\,X\) is:
where \(\lambda = \mathcal {L}_Y (\log h) ={\displaystyle \frac{1}{h}} \mathcal {L}_Y h\).
This last equation, \(\nabla _Y Y = \lambda Y + h^2\,Z\), is the general expression of time reparametrisation of the equation \(\nabla _XX = Z\), when changing the vector field X by \(Y = h\,X \) in the Newtonian system \(\nabla _XX=Z\).
This result can be summarised as:
Proposition 6.2
The integral curves of a given vector field \(Y \in {\mathfrak {X}}(M)\) can be reparametrised to be solutions of the Newtonian equation \(\nabla _{{\dot{\gamma }}(t)}{\dot{\gamma }} (t) = Z (\gamma (t))\) if, and only if, there exists a function \(h : M \rightarrow \mathbb {R}, \, h > 0\), which satisfies the equation
where \(\lambda = \mathcal {L}_Y (\log h) ={\displaystyle \frac{1}{h}} \mathcal {L}_Y h\). \(\Box \)
Remark that, as a consequence of this last Proposition, unless \(Z = 0\) or \( Z = f\, X\) with \(\nabla _XX = 0\), we cannot find a Sundman reparametrisation of the curves solution to \(\nabla _{\dot{\gamma }(t)}{\dot{\gamma }} (t) = Z (\gamma (t))\) to obtain geodesics of the metric g, that is curves satisfying equation \(\nabla _{\dot{\gamma }(t)}{\dot{\gamma }} (t) = 0\), and therefore, in order to understand such curves as geodesics we need to change the Riemannian metric g to eliminate the external force with an adequate connection and, as we will see in the sequel, we cannot do this in the whole configuration manifold M. Later on we will show how to proceed in the case of a mechanical type Lagrangian system, leading to the so called Jacobi metric.
6.2 Mechanical Type Systems on a Riemann Manifold
We consider now Lagrangian systems of simple mechanical type, that is, Lagrangians of the form \(L=T_g-\tau _M^*V\), defined by a Riemann metric g on M and a function \(V:M\rightarrow \mathbb {R}\). Its energy function is then \(E=T_g+\tau _M^*V\). We have shown in (4.35) that the second order differential equation of the dynamical trajectories is
Which equation is the corresponding one when we apply a time reparametrisation?
When expressed in terms of a generic parameter \(\tau \) defined as a given function of t, as in (5.10),
we obtain as in (5.11) that
and the differential equation for those curves in such a generic parametrisation will be
with
In this way we have obtained the differential equation of the trajectories of the given mechanical system in a general parametrisation.
7 Conformal Metrics and Sundman Transformation. The Jacobi Metric
7.1 Sundman Transformation in Free Motions. Changes in the Riemannian Metric
In this Subsection and the next one we go to a more geometric approach to the same problem of reparametrisation. We will try to change the metric g in order to modify the geometric properties of the dynamical trajectories of the system.
Let us remark that if we carry out the Sundman transformation (2.12) in the framework of Lagrangian formulation, with f being a basic function, the new velocities \({\bar{v}}\) are related to the previous ones v by \({\bar{v}}=f\, v\), and, moreover, if a system was defined by a Lagrangian L, in order to the action be well defined and preserved, the system must be described in terms of the new time \(\tau \) by a new Lagrangian
and then \({\displaystyle \int L\, dt= \int {\bar{L}}\, d\tau }\).
The new dynamical vector field will be given by
for appropriate functions \({\bar{F}}^i\) as given by (4.27).
In the particular case of a free motion on a Riemann manifold (M, g), the new Lagrangian will be the kinetic energy defined by the metric \((1/f)\,g\), because g is quadratic in velocities and therefore \(f\, L(q,{\bar{v}}/f)=(1/f) L(q,{\bar{v}})\).
On the other side, the considered Sundman transformation for a mechanical type system amounts to change not only the Riemann structure from g to the conformally related one \({\bar{g}}=(1/f) g\) but also the potential function V to \({\bar{V}}=f\, V\), a fact that has recently been used in the corresponding Hamiltonian formalism in the search for a new superintegrable system [39] according to the metod developed in [40]. Recall that a mechanical type system for which there is a coordinate system such that the potential function is a sum \(V(q)=V_1(q_1)+\cdots +V_n(q_n)\) and the local expression of the Riemann structure is diagonal, i.e.
is separable as a sum of one-dimensional systems and hence integrable by quadratures. A generalisation of such system is due to Liouville [40] and consists on the Hamiltonian
where \(W(q)=W_1(q_1)+\cdots +W_n(q_n)\). These systems are called Liouville systems [41, 42] and one can check that the n functions
are constants of motion \(\{H, F_i\}=0\), but they are not independent because \(\sum _{i=1}^n F_i=0\). Therefore, starting from an appropriate Hamiltonian H one can look for possible functions f such that the new Hamiltonian fH satisfies the required properties of superintegrability.
This method of deriving from a given set of involutive functions a new one recalls very much the Stäckel transforms [43] and the coupling constant metamorphosis [44] where also infinitesimal time reparametrisations are used (see also [45] where reciprocal transformations of different times are used in the study of generalised Stäckel transforms).
It is interesting to study the relationship with the case of a metric \({\bar{g}}=e^{2\varphi }g\), which corresponds to \(f=e^{-2\varphi }\). We have proven in (4.21) that in this case the new Christoffel symbols of the second kind are:
Then, instead of (5.7) the new equations of the motion for a mechanical system defined by \({\bar{g}}\) and V will be:
for \( i=1,\ldots ,\dim M\).
Here we see that the two last terms of the left-hand side of (7.4) correspond to the two last terms in (4.21).
If we reparametrise in (7.4) in a way similar to (6.5), i.e.
using expressions corresponding to (6.6) such differential equation becomes
for \( i=1,\ldots ,\dim M\), where
The expression (7.6) is the differential equation for the dynamical trajectories of a simple mechanical control system in a general parametrisation with respect to a metric \(\bar{g}=e^{2\varphi }g\).
It is to be remarked that in the free (geodesic) case \(V=0\) the equation of geodesic curves for the Riemann structure \(\bar{g}=e^{2\varphi }g\) in terms of the new time \(\tau \) such that \( d\tau = e^{2\varphi } dt\) is
which does not coincide with (5.15) for \(f=e^{-2\varphi }\) because of the last term on the leftt-hand side of (7.8).
7.2 Sundman Transformation and the Jacobi Metric
From a local viewpoint we can look for a possible choice of the function \(\varphi \) such that there exists a Sundman reparametrisation (5.14) of the geodesics lines equation in (M, g) given by (5.4) leading to the equation (7.4). This choice is possible when we restrict our study to motions given by (6.4) with a fixed energy E, i.e. when
A simple comparison of (5.15) with (7.4) shows that both equations coincide when
i.e. \(f=e^{-2\varphi }\), and
When the energy E of the mechanical system defined by \({\bar{g}}\) and V is fixed,
from where we obtain \(f^2=2\, e^{-2\varphi } \,(E-V)\). Using this value for \(f^2\), (7.11) becomes
and from here we obtain that
Consequently, we have recovered the well-known result about Jacobi metric: The geodesics of the Jacobi metric \(g_E=(E-V)g \) when using as parameter its arc-length \(s_E\), are the solutions with fixed energy E of the mechanical system determined by the Lagrangian \(L_{g,V}\).
With a simple look at equations (5.8) and (6.4) or the corresponding equations in terms of \(\nabla _X \), one can try to relate both types of equations. From the geometric viewpoint this suggests us the following question: Can we conformally change the Riemannian metric g to another one \({\bar{g}}=\exp (2\varphi )\, g\), with an adequate \(\varphi \), such that the vector fields X solution to the dynamical equation, \(\nabla _XX=-\text {grad}\, V\), are geodesic, or at least pregeodesic, vector fields for the Riemannian metric \({\bar{g}}\)?
We have the following result:
Theorem 7.1
Let \(X\in {\mathfrak {X}}(M)\) be a solution to the equation \(\nabla _XX=-\mathrm{grad\,} V\), and suppose that the function \(E(X):M\rightarrow \mathbb {R}\) defined on M by \(E(X)=E\circ X\), i.e. \(E(X)= (T_g+V\circ \tau _M)(X)\), takes a constant value, \(E=E_0\in \mathbb {R}\). Then, X is a pregeodesic vector field for the Riemannian metric \({\bar{g}}=\exp (2\varphi )\, g\) if, and only if, there exists a function f such that
Moreover, if \(f=0\) and M is connected, then \(\varphi = \log (E_0-V)^{1/2}+k\), where k is a real number, that is, \(\bar{g}=e^{2k}(E_0-V)g\). The case \(k=0\) is usually called Jacobi metric: \({\bar{g}}=(E_0-V)g\).
Proof
Let be \({\bar{g}}=\exp (2\varphi )\, g\), and recall the relation (4.18) between the covariant derivatives with respect to g and \({\bar{g}}\) and the corresponding equation (4.20) for \(X=Y\).
Therefore, the vector field X is pregeodesic for \({\bar{g}}\) if, and only if, there exists a function h such that \(\bar{\nabla }_XX=h\, X\), and hence if, and only if, \(\nabla _XX-g(X,X)\, {\text {grad}}_g\varphi =f\, X\) with \(f=h-2 \mathcal {L}_X\varphi \).
But the condition \(\nabla _XX=-{\text {grad}_g}V\) for the vector field X is then equivalent to
where use has been made of \(E(X)=E_0\) and
If \(f=0\), then \({\text {grad}}_g\left( \varphi - \log (E_0-V)^{1/2}\right) =0\), and consequently, when M is connected, there exists a real number k such that \(\varphi =\log (E_0-V)^{1/2}+k\), where k is a real number.
We have obtained that \({\bar{g}}= \exp (2\varphi )g= e^{2k}(E_0-V)g\). Obviously the factor k is irrelevant for the characterization of the geodesics of the family of metrics \({\bar{g}}\) and we can choose \(k=0\) as in the classical Jacobi metric. \(\square \)
The above Theorem is, at our knowledge, the most natural approximation to the description of the Jacobi metric in a mechanical type system. Another approach to Jacobi metric can be found in [46].
8 Comments on Jacobi Metric and Hamilton–Jacobi Equation
Remark that condition \(E(X)= (T+V\circ \tau _M)(X)=E_0\in \mathbb {R}\) is equivalent to say that the image of \(X:M\rightarrow TM\) is contained in the hypersurface of TM
This is a natural condition because the total energy \(E=T+V\) is a constant of the motion for the dynamical Newtonian system. In fact, if \(X\in {\mathfrak {X}}(M)\) is a solution to the equation \(\nabla _XX=-\text {grad}\, V\), then:
and therefore, as
we obtain that \(\mathcal {L}_X(E(X))=0\).
Hence for every vector field \(X\in {\mathfrak {X}}(M)\) solution to \(\nabla _XX=-\text {grad}\, V\), we have that the image of every integral curve of \(X:M\rightarrow TM\) is contained in a constant energy surface, that is, \(E\circ \gamma :\mathbb {R}\rightarrow \mathbb {R}\) is a constant \(E_0\). This constant is generically different for every integral curve.
The above Theorem can also be stated for the curves solution to the mechanical type systems, that is: a curve satisfying \(\nabla _{{\dot{\gamma }}}{\dot{\gamma }}=Z_F\circ \gamma = -(\text {grad}\, V)\circ \gamma \) is a pregeodesic of the metric \({\bar{g}}=e^{2k} \exp (2\varphi )g\), with \(k\in \mathbb {R}\), and in particular for the Jacobi metric determined by \(k=0\).
For the general Newtonian case \(\nabla _XX=Z_F\), where F is an arbitrary semi-basic 1-form on TM, the necessary and sufficient condition for X to be a pregeodesic vector field is the existence of a function f such that \(\nabla _XX+g(X,X) X_F=f\, X\), but this situation is not easy to deal with and we have not any constant of the motion to be chosen instead of the energy. Observe that if \(E(X)=E_0\) the family of integral curves of X is contained in the above hypersurface of TM.
The above results are related with Hamilton-Jacobi equation. In fact if we suppose that the vector field X satisfies the equation \(d\,( i_Xg)=0\), then condition \(\nabla _XX=-\text {grad}\, V\) is equivalent to \(d\,(E(X))=0\), which is the global expression of the classical Hamilton-Jacobi equation in the Lagrangian form. See [47] for more details on this subject.
9 Conclusions and Future Work
We started with the classical definition of Sundman transformation for autonomous systems of first-order differential equations and its applications at the beginning of twentieth century and describe it in a geometric way as a conformal change in the corresponding. dynamical vector field. This geometric approach allows us to implement new applications and to understand why such transformations can be useful when additional geometric structures are present. The case of systems of second-order differential equations is not so easy because the concept of velocity also changes. However, those derivable from a variational principle as those related to geodesic motions or Newtonian mechanical systems have been studied in the framework of Riemannian geometry. We can give a geometric answer to what is the relation between vector fields if we can relate their integral curves or we impose some particular properties to these integral curves. This is stated and solve in Sects. 5 and 6.
As we relate the Sundman transformation with a conformal change, we use the same idea to obtain the Jacobi metric as a kind of Sundman transformation, in fact a conformal one of the metric of the manifold which is the configuration space of the mechanical system. This is made in Sect. 7, Theorem 7.1, and the relation with Hamilton–Jacobi equation for Newtonian systems is commented in Sect. 8. This application is also related with the results obtained in Sect. 6.
There are several future lines of development, most of them related with the problems included in Sect. 3. On the other side, the geometric definition of Sundman transformation for general systems of second-order differential equation needs to be more carefully studied. As the concept of velocity after a Sundman transformation is different, we have to consider alternative tangent bundle structures. This shows the convenience of the study of the different structures associated with the tangent and cotangent bundles of a manifold, and this also affects to the idea of linear and Hamiltonian systems respectively. We hope to present some results in these lines in a forthcoming paper.
Data Availability Statement
Not applicable.
References
Sundman, K.F.: Mémoire sur le problème des trois corps. Acta Math. 36, 105–179 (1913)
Levi-Civita, T.: Sur la régularisation du problème des trois corps. Acta Math. 42, 99–144 (1920)
Levi-Civita, T.: Traiettorie singolari ed urti nel problema ristretto dei tre corpi. Annali di Matematica 9, 1–32 (1904)
Levi-Civita, T.: Sur la résolution qualitative du problème restreint des trois corps. Acta Math. 30, 305–327 (1906)
Bohlin, K.: Note sur le problème des deux corps et sur une intégration nouvelle dans le problème des trois corps. Bull. Astron. 28, 113–119 (1911)
Duarte, L.G.S., Moreira, I.C., Santos, F.C.: Linearization under non-point transformations. J. Phys. A Math. Gen. 27, L739–L743 (1994)
Blanes, S., Iserles, A., Celest, A.: Explicit adaptive symplectic integrators for solving Hamiltonian systems. Mech. Dyn. Astron. 114, 297–317 (2012)
Cirilli, S., Hairer, E., Leimkuhler, B.: Asymptotic error analysis of the adaptive Verlet method. BIT Numer. Math. 39, 25–33 (1999)
Nacozy, P.: A discussion of time transformations and local truncation errors. Celest. Mech. 13, 495–501 (1976)
Euler, N.: Transformation properties of \(\ddot{x}+f_1(t)\,\dot{x}+f_2(t)\, x+f_3(t)\, x^n=0\). J. Nonlinear Math. Phys. 4, 310–337 (1997)
Euler, N., Euler, M.: Sundman symmetries of nonlinear second-order and third-order ordinary differential equations. J. Nonlinear. Math. Phys. 11, 399–423 (2004)
Bond, V.R.: A transformation of the two-body problem. Celest. Mech. 35, 1–7 (1985)
Ferrer, S., Sein-Echaluce, M.L.: On the Szebehely-Bond equation generalized Sundman’s transformation for the perturbed two-body problem. Celest. Mech. 32, 333–347 (1984)
Szebehely, V., Bond, V.: Transformations of the perturbed two-body problem to unperturbed harmonic oscillators. Celest. Mech. 30, 59–69 (1983)
Kavle, H., Offin, D., Portaluri, A.: Keplerian orbits through the Conley–Zehnder index. Qual. Theory Dyn. Syst. 20, 10 (2021)
Pellegrini, E., Russell, R.P., Vittaldev, V.: \(F\) and \(G\) Taylor series solutions to the Stark and Kepler problems with Sundman transformations. Celest. Mech. Dyn. Astron. 118, 355–378 (2014)
Cariñena, J.F., Clemente-Gallardo, J., Jover-Galtier, J.A., Marmo, G.: Tangent bundle geometry from dynamics: application to the Kepler problem. Int. J. Geom. Methods Mod. Phys. 14, 1750047 (2017)
Moyo, S., Meleshko, S.V.: Application of the generalised Sundman transformation to the Linearisation of two second-order ordinary differential equations. J. Nonlinear Math. Phys. 18(S1), 213–236 (2011)
Cariñena, J.F., Ibort, L.A., Lacomba, E.: Time scaling as an infinitesimal canonical transformation in Celestial Mechanics. Celest. Mech. 42, 201–213 (1988)
Bond, V.R., Janin, G.: Canonical orbital elements in terms of an arbitrary independent variable. Celest. Mech. 23, 159–172 (1981)
Cariñena, J.F., Ibort, A., Marmo, G., Morandi, G.: Geometry from Dynamics: Classical and Quantum. Springer, Dordrecht (2015)
Jacobi, C., Clebsch, A., Brockhardt, C.: Jacobi’s Lectures on Dynamics. Texts and Readings in Mathematics. Hindustan Book Agency, New Delhi (2009)
Cariñena, J.F., Fernández-Núñez, J.: Jacobi multipliers in integrability and the inverse problem of mechanics. Symmetry 13, 1413 (2021)
Cariñena, J.F., Ibort, L.A.: Non-Noether constants of motion. J. Phys. A Math. Gen. 16, 1–7 (1983)
Koszul, J.L.: Crochet de Schouten-Nijenhuis et cohomologie, In: E. Cartan et les Mathématiciens d’aujourd’hui, Lyon, 25–29 Juin, 1984, Astérisque, hors-série, pp. 251–271 (1985)
Lichnerowicz, A.: Les variétés de Poisson et leur algèbres de Lie associées. J. Diff. Geom. 12, 253–300 (1977)
Bizyaev, I.A., Mamaev, I.S.: Hamiltonization of elementary nonholonomic systems. Russ. J. Math. Phys. 22, 444–453 (2015)
Bizyaev, I.A., Borisov, A.V., Mamaev, I.S.: The Hojman construction and Hamiltonization of nonholonomic systems. SIGMA 12, 012 (2016)
Lee, J.M.: Introduction to Riemannian manifolds, Graduate Texts in Mathematics, vol. 176. Springer, New York (2018)
Conlon, L.: Differentiable Manifolds. Modern Birkhäuser Classics. Birkhäuser, Boston (2008)
Matveev, V.S., Trautman, A.: A criterion for compatibility of conformal and projective structures. Commun. Math. Phys. 329, 821–825 (2014)
Crampin, M.: On the differential geometry of the Euler-Lagrange equations and the inverse problem in Lagrangian dynamics. J. Phys. A Math. Gen. 14, 2567–2575 (1981)
Crampin, M.: Tangent bundle geometry for Lagrangian dynamics. J. Phys. A Math. Gen. 16, 3755–3772 (1983)
Cariñena, J.F., López, C.: Symplectic structure on the set of geodesics of a Riemannian manifold. Int. J. Mod. Phys. A 6, 431–444 (1991)
Deshmukh, S., Peska, P., Bin Turki, N.: Geodesic vector fields on a Riemannian manifold. Mathematics 8, 137 (2020)
Berestovskii, V.N., Nikonorov, Y.G.: Clifford-Wolf homogeneous Riemannian manifolds. J. Diff. Geom. 82, 467–500 (2009)
Nikonorov, Y.G.: Spectral properties of Killing vector fields of constant length. J. Geom. Phys. 145, 103485 (2019)
Deshmukh, S., Chen, B.Y.: A note on Yamabe solitons. Balkan J. Geom. Appl. 23, 37–42 (2018)
Cariñena, J..F., Rañada, M..F., Santander, M.: Superintegrability of 3-dimensional Hamiltonian systems with conformally Euclidean metrics. Oscillator-related and Kepler-related systems. J. Phys. A Math. Theor. 54, 105201 (2021)
Liouville, J.: L’integration des équations différentielles du mouvement d’un nombre quelconque de points matériels. Journal des Mathématiques Pures et appliqúees 14, 257–299 (1849)
Perelomov, A.M.: Integrable Systems of Classical Mechanics and Lie Algebras. Birkhauser, Basel (1990)
González-León, M.A., Mateos-Guilarte, J., de la Torre Mayado, M.: On the Equivalence Between Type I Liouville Dynamical Systems in the Plane and the Sphere. In: Integrability, supersymmetry and coherent states, pp. 359–373, CRM Ser. Math. Phys. Springer, New York (2019)
Boyer, C.P., Kalnins, E.G., Miller, W.: Stäckel-Equivalent Integrable Hamiltonian Systems. SIAM J. Math. Anal. 17, 778–797 (1986)
Hietarinta, J., Grammaticos, B., Dorizzi, B., Ramani, A.: Coupling-constant metamorphosis and duality between integrable Hamiltonian systems. Phys. Rev. Lett. 53, 1707–1710 (1984)
A. Sergyeyev, A., Blaszak, M.: Generalized Stäckel transform and reciprocal transformations for finite-dimensional integrable systems. J. Phys. A Math. Theor. 41, 105205 (2008)
López, C., Martínez, E.: SubFinslerian metric associated to an Optimal Control system. SIAM J. Cont. Opt. 39, 798–811 (2000)
Cariñena, J.F., Gràcia, X., Marmo, G., Martínez, E., Muñoz-Lecanda, M.C., Román-Roy, N.: Geometric Hamilton–Jacobi theory. Int. J. Geometr. Methods Mod. Phys. 3, 1417–1458 (2006)
Acknowledgements
The authors acknowledge the financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades projects PGC2018-098265-B-C31 and PGC2018-098265-B-C33.
Funding
Financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades, projects PGC2018-098265-B-C31 and PGC2018-098265-B-C33 (MINECO, Madrid) and DGA project E48_20R Anánalysis física Matemática.
Author information
Authors and Affiliations
Contributions
The authors, JFC, EMF and MCML, equally contributed to the paper and have approved the submitted version.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Ethics approval and consent to participate
Not applicable.
Consent for publication
Informed consent was obtained from all individual participants included in the study.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Cariñena, J.F., Martínez, E. & Muñoz-Lecanda, M.C. Infinitesimal Time Reparametrisation and Its Applications. J Nonlinear Math Phys 29, 523–555 (2022). https://doi.org/10.1007/s44198-022-00037-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s44198-022-00037-w