Skip to main content
SpringerLink
Log in

Recent advances in system reliability optimization driven by importance measures

  • Review Article
  • Published:
Frontiers of Engineering Management Aims and scope Submit manuscript

Abstract

System reliability optimization problems have been widely discussed to maximize system reliability with resource constraints. Birnbaum importance is a well-known method for evaluating the effect of component reliability on system reliability. Many importance measures (IMs) are extended for binary, multistate, and continuous systems from different aspects based on the Birnbaum importance. Recently, these IMs have been applied in allocating limited resources to the component to maximize system performance. Therefore, the significance of Birnbaum importance is illustrated from the perspective of probability principle and gradient geometrical sense. Furthermore, the equations of various extended IMs are provided subsequently. The rules for simple optimization problems are summarized to enhance system reliability by using ranking or heuristic methods based on IMs. The importance-based optimization algorithms for complex or large-scale systems are generalized to obtain remarkable solutions by using IM-based local search or simplification methods. Furthermore, a general framework driven by IM is developed to solve optimization problems. Finally, some challenges in system reliability optimization that need to be solved in the future are presented.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • Abouei Ardakan M, Zeinal Hamadani A (2014). Reliability-redundancy allocation problem with cold-standby redundancy strategy. Simulation Modelling Practice and Theory, 42: 107–118

    Google Scholar 

  • Abouei Ardakan M, Rezvan M T (2018). Multi-objective optimization of reliability-redundancy allocation problem with cold-standby strategy using NSGA-II. Reliability Engineering & System Safety, 172: 225–238

    Google Scholar 

  • Aliee H, Vitzethum S, Glaß M, Teich J, Borgonovo E (2016). Guiding Genetic Algorithms using importance measures for reliable design of embedded systems. In: Proceedings of International Symposium on Defect and Fault Tolerance in VLSI and Nanotechnology Systems. Storrs, CT: IEEE, 53–56

    Google Scholar 

  • Arora S, Singh S, Yetilmezsoy K (2018). A modified butterfly optimization algorithm for mechanical design optimization problems. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(1): 21

    Google Scholar 

  • Aven T, Jensen U (2000). Stochastic Models in Reliability, 2nd ed. New York: Springer

    MATH  Google Scholar 

  • Barabady J, Kumar U (2007). Availability allocation through importance measures. International Journal of Quality & Reliability Management, 24(6): 643–657

    Google Scholar 

  • Barlow R E, Proschan F (1975). Importance of system components and fault tree events. Stochastic Processes and Their Applications, 3(2): 153–173

    MathSciNet  MATH  Google Scholar 

  • Baroud H, Barker K (2018). A Bayesian kernel approach to modeling resilience-based network component importance. Reliability Engi-neering & System Safety, 170: 10–19

    Google Scholar 

  • Baxter L A (1984). Continuum structures I. Journal of Applied Probability, 21(4): 802–815

    MathSciNet  MATH  Google Scholar 

  • Baxter L A (1986). Continuum structures II. Mathematical Proceedings of the Cambridge Philosophical Society, 99(2): 331–338

    MathSciNet  MATH  Google Scholar 

  • Bhattacharya D, Roychowdhury S (2014). Redundancy allocation using component-importance measures for maximizing system reliability. American Journal of Mathematical and Management Sciences, 33(1): 36–54

    Google Scholar 

  • Bhattacharya D, Roychowdhury S (2016). Bayesian importance measure-based approach for optimal redundancy assignment. American Journal of Mathematical and Management Sciences, 35(4): 335–344

    Google Scholar 

  • Birnbaum Z W (1969). On the importance of different components in a multicomponent system. Multivariate Analysis, II: 581–592

    Google Scholar 

  • Boland P J, El-Neweihi E, Proschan F (1988). Active redundancy allocation in coherent systems. Probability in the Engineering and Informational Sciences, 2(3): 343–353

    MATH  Google Scholar 

  • Borgonovo E, Aliee H, GlaB M, Teich J (2016). A new time-independent reliability importance measure. European Journal of Operational Research, 254(2): 427–442

    MathSciNet  MATH  Google Scholar 

  • Bretas A S, Cabral R J, Leborgne R C, Ferreira G D, Morales J A (2018). Multi-objective MILP model for distribution systems reliability optimization: A lightning protection system design approach. International Journal of Electrical Power & Energy Systems, 98: 256–268

    Google Scholar 

  • Cai Z Q, Si S B, Liu Y, Zhao J B (2018). Maintenance optimization of continuous state systems based on performance improvement. IEEE Transactions on Reliability, 67(2): 651–665

    Google Scholar 

  • Cai Z Q, Si S B, Sun S D, Li C T (2016). Optimization of linear consecutive-k-out-of-n system with a Birnbaum importance-based genetic algorithm. Reliability Engineering & System Safety, 152: 248–258

    Google Scholar 

  • Cepin M (2019). Evaluation of the power system reliability if a nuclear power plant is replaced with wind power plants. Reliability Engineering & System Safety, 185: 455–464

    Google Scholar 

  • Chakri A, Yang X S, Khelif R, Benouaret M (2018). Reliability-based design optimization using the directional bat algorithm. Neural Computing & Applications, 30(8): 2381–2402

    Google Scholar 

  • Chern M S (1992). On the computational complexity of reliability redundancy allocation in a series system. Operations Research Letters, 11(5): 309–315

    MathSciNet  MATH  Google Scholar 

  • Coit D W, Smith A E (1996). Reliability optimization of series-parallel systems using a genetic algorithm. IEEE Transactions on Reliability, 45(2): 254–260

    Google Scholar 

  • Coit D W, Zio E (2019). The evolution of system reliability optimization. Reliability Engineering & System Safety, 192: 106259

    Google Scholar 

  • Compare M, Bellani L, Zio E (2019). Optimal allocation of prognostics and health management capabilities to improve the reliability of a power transmission network. Reliability Engineering & System Safety, 184: 164–180

    Google Scholar 

  • Compare M, Bellora M, Zio E (2017). Aggregation of importance measures for decision making in reliability engineering. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 231(3): 242–254

    Google Scholar 

  • da Costa Bueno V (2005). Minimal standby redundancy allocation in a k-out-of-n: F system of dependent components. European Journal of Operational Research, 165(3): 786–793

    MathSciNet  MATH  Google Scholar 

  • Derman C, Lieberman G J, Ross S M (1974). Optimal allocations in the construction of k-out-of-n reliability systems. Management Science, 21(3): 241–250

    MathSciNet  MATH  Google Scholar 

  • Du Y J, Si S B, Jin T D (2019). Reliability importance measures for network based on failure counting process. IEEE Transactions on Reliability, 68(1): 267–279

    Google Scholar 

  • Dui H Y, Chen L W, Wu S M (2017a). Generalized integrated importance measure for system performance evaluation: Application to a propeller plane system. Maintenance and Reliability, 19(2): 279–286

    Google Scholar 

  • Dui H Y, Li S M, Xing L D, Liu H L (2019). System performance-based joint importance analysis guided maintenance for repairable systems. Reliability Engineering & System Safety, 186: 162–175

    Google Scholar 

  • Dui H Y, Si S B, Sun S D, Cai Z Q (2013). Gradient computations and geometrical meaning of importance measures. Quality Technology & Quantitative Management, 10(3): 305–318

    Google Scholar 

  • Dui H Y, Si S B, Wu S M, Yam R C M (2017b). An importance measure for multistate systems with external factors. Reliability Engineering & System Safety, 167: 49–57

    Google Scholar 

  • Dui H Y, Si S B, Yam R C M (2017c). A cost-based integrated importance measure of system components for preventive maintenance. Reliability Engineering & System Safety, 168: 98–104

    Google Scholar 

  • Dui H Y, Si S B, Yam R C M (2018). Importance measures for optimal structure in linear consecutive-k-out-of-n systems. Reliability Engineering & System Safety, 169: 339–350

    Google Scholar 

  • Espiritu J F, Coit D W, Prakash U (2007). Component criticality importance measures for the power industry. Electric Power Systems Research, 77(5–6): 407–420

    Google Scholar 

  • Fang C, Marie F, Xie M (2017). Applying importance measures to risk analysis in engineering project using a risk network model. IEEE Systems Journal, 11(3): 1548–1556

    Google Scholar 

  • Fang Y, Pedroni N, Zio E (2016). Resilience-based component importance measures for critical infrastructure network systems. IEEE Transactions on Reliability, 65(2): 502–512

    Google Scholar 

  • Fu Y, Yuan T, Zhu X (2019a). Importance-measure based methods for component reassignment problem of degrading components. Reliability Engineering & System Safety, 190: 106501

    Google Scholar 

  • Fu Y, Yuan T, Zhu X (2019b). Optimum periodic component reallocation and system replacement maintenance. IEEE Transactions on Reliability, 68(2): 753–763

    Google Scholar 

  • Garg H, Sharma S P (2013). Multi-objective reliability-redundancy allocation problem using particle swarm optimization. Computers & Industrial Engineering, 64(1): 247–255

    Google Scholar 

  • Ghambari S, Rahati A (2018). An improved artificial bee colony algorithm and its application to reliability optimization problems. Applied Soft Computing, 62: 736–767

    Google Scholar 

  • Gopal K, Aggarwal K K, Gupta J S (1980). A new method for solving reliability optimization problem. IEEE Transactions on Reliability, R-29(1): 36–37

    MATH  Google Scholar 

  • Griffith W S (1980). Multistate reliability models. Journal of Applied Probability, 17(3): 735–744

    MathSciNet  MATH  Google Scholar 

  • Gupta S, Bhattacharya J, Barabady J, Kumar U (2013). Cost-effective importance measure: A new approach for resource prioritization in a production plant. International Journal of Quality & Reliability Management, 30(4): 379–386

    Google Scholar 

  • He X, Yuan Y (2019). A framework of identifying critical water distribution pipelines from recovery resilience. Water Resources Management, 33(11): 3691–3706

    Google Scholar 

  • Hilber P, Bertling L (2004). Monetary importance of component reliability in electrical networks for maintenance optimization. In: Proceedings of International Conference on Probabilistic Methods Applied to Power Systems. Ames, LA: IEEE, 150–155

    Google Scholar 

  • Jiang T, Liu Y, Zheng Y X (2019). Optimal loading strategy for multi-state systems: Cumulative performance perspective. Applied Mathematical Modelling, 74: 199–216

    MathSciNet  MATH  Google Scholar 

  • Kim C, Baxter L A (1987). Reliability importance for continuum structure functions. Journal of Applied Probability, 24(3): 779–785

    MathSciNet  MATH  Google Scholar 

  • Knight C R (1991). Four decades of reliability progress. In: Proceedings of Annual Reliability and Maintainability Symposium. Orlando, FL: IEEE, 156–160

    Google Scholar 

  • Kulturel-Konak S, Smith A E, Coit D W (2003). Efficiently solving the redundancy allocation problem using tabu search. HE Transactions, 35(6): 515–526

    Google Scholar 

  • Kuo W, Lin H H, Xu Z K, Zhang W X (1987). Reliability optimization with the Lagrange-multiplier and branch-and-bound technique. IEEE Transactions on Reliability, R-36(5): 624–630

    MATH  Google Scholar 

  • Kuo W, Prasad V R (2000). An annotated overview of system-reliability optimization. IEEE Transactions on Reliability, 49(2): 176–187

    Google Scholar 

  • Kuo W, Zhu X (2012). Importance Measures in Reliability, Risk and Optimization: Principles and Applications. Chichester: John Wiley & Sons

    Google Scholar 

  • Levitin G, Finkelstein M, Dai Y (2017a). Redundancy optimization for series-parallel phased-mission systems exposed to random shocks. Reliability Engineering & System Safety, 167: 554–560

    Google Scholar 

  • Levitin G, Xing L, Amari S V (2012). Recursive algorithm for reliability evaluation of non-repairable phased-mission systems with binary elements. IEEE Transactions on Reliability, 61(2): 533–542

    Google Scholar 

  • Levitin G, Xing L, Dai Y (2017b). Optimization of component allocation/distribution and sequencing in warm standby series-parallel systems. IEEE Transactions on Reliability, 66(4): 980–988

    Google Scholar 

  • Levitin G, Xing L, Dai Y (2017c). Reliability versus expected mission cost and uncompleted work in heterogeneous warm standby multiphase systems. IEEE Transactions on Systems, Man, and Cybernetics: Systems, 47(3): 462–473

    Google Scholar 

  • Li R Y, Wang J F, Liao H T, Huang N (2015). A new method for reliability allocation of avionics connected via an airborne network. Journal of Network and Computer Applications, 48: 14–21

    Google Scholar 

  • Li X Y, Huang H Z, Li Y F (2018). Reliability analysis of phased-mission system with non-exponential and partially repairable components. Reliability Engineering & System Safety, 175: 119–127

    Google Scholar 

  • Liang Y C, Smith A E (2004). An ant colony optimization algorithm for the redundancy allocation problem (RAP). IEEE Transactions on Reliability, 53(3): 417–423

    Google Scholar 

  • Lin F H, Kuo W (2002). Reliability importance and invariant optimal allocation. Journal of Heuristics, 8(2): 155–171

    MATH  Google Scholar 

  • Lin M S, Chen D J (1997). The computational complexity of the reliability problem on distributed systems. Information Processing Letters, 64(3): 143–147

    MathSciNet  MATH  Google Scholar 

  • Lin S, Fang X, Lin F, Yang Z, Wang X (2018). Reliability of rail transit traction drive system: A review. Microelectronics and Reliability, 88–90:1281–1285

    Google Scholar 

  • Liu S Y, She R, Fan P Y, Letaief K B (2018). Non-parametric message importance measure: Storage code design and transmission planning for big data. IEEE Transactions on Communications, 66(11): 5181–5196

    Google Scholar 

  • Marseguerra M, Zio E, Podofillini L, Coit D W (2005). Optimal design of reliable network systems in presence of uncertainty. IEEE Transactions on Reliability, 54(2): 243–253

    Google Scholar 

  • Mettas A (2000). Reliability allocation and optimization for complex systems. In: Proceedings of Annual Reliability and Maintainability Symposium. International Symposium on Product Quality and Integrity. Los Angeles, CA: IEEE, 216–221

    Google Scholar 

  • Mi J H, Li Y F, Peng W, Huang H Z (2018). Reliability analysis of complex multi-state system with common cause failure based on evidential networks. Reliability Engineering & System Safety, 174: 71–81

    Google Scholar 

  • Mohamad F, Teh J (2018). Impacts of energy storage system on power system reliability: A systematic review. Energies, 11(7): 1749

    Google Scholar 

  • Nguyen K A, Do P, Grail A (2017). Joint predictive maintenance and inventory strategy for multi-component systems using Birnbaum’s structural importance. Reliability Engineering & System Safety, 168: 249–261

    Google Scholar 

  • Onishi J, Kimura S, James R J W, Nakagawa Y (2007). Solving the redundancy allocation problem with a mix of components using the improved surrogate constraint method. IEEE Transactions on Reliability, 56(1): 94–101

    Google Scholar 

  • Pant S, Anand D, Kishor A, Singh S B (2015). A particle swarm algorithm for optimization of complex system reliability. International Journal of Performability Engineering, 11(1): 33–42

    Google Scholar 

  • Papastavridis S (1987). The most important component in a consecutive-k-out-of-n: F system. IEEE Transactions on Reliability, R-36(2): 266–268

    MATH  Google Scholar 

  • Peng R, Zhai Q Q, Xing L D, Yang J (2016). Reliability analysis and optimal structure of series-parallel phased-mission systems subject to fault-level coverage. HE Transactions, 48(8): 736–746

    Google Scholar 

  • Prasad V R, Kuo W (2000). Reliability optimization of coherent systems. IEEE Transactions on Reliability, 49(3): 323–330

    Google Scholar 

  • Qiu S Q, Sallak M, Schon W, Ming H X G (2018). Extended LK heuristics for the optimization of linear consecutive-k-out-of-n: F systems considering parametric uncertainty and model uncertainty. Reliability Engineering & System Safety, 175: 51–61

    Google Scholar 

  • Ramirez-Marquez J E, Coit D W (2004). A heuristic for solving the redundancy allocation problem for multi-state series-parallel systems. Reliability Engineering & System Safety, 83(3): 341–349

    Google Scholar 

  • Ramirez-Marquez J E, Coit D W (2007). Multi-state component criticality analysis for reliability improvement in multi-state systems. Reliability Engineering & System Safety, 92(12): 1608–1619

    Google Scholar 

  • Ramirez-Marquez J E, Rocco C M, Gebre B A, Coit D W, Tortorella M (2006). New insights on multi-state component criticality and importance. Reliability Engineering & System Safety, 91(8): 894–904

    Google Scholar 

  • Rausand M, Høyland A (2003). System Reliability Theory: Models, Statistical Methods and Applications, 2nd ed. Hoboken: John Wiley & Sons

    MATH  Google Scholar 

  • Roychowdhury S, Bhattacharya D (2019). Performance improvement of a multi-state coherent system using component importance measure. American Journal of Mathematical and Management Sciences, 38(3): 312–324

    Google Scholar 

  • Shen J, Cui L (2015). Reliability and Birnbaum importance for sparsely connected circular consecutive-A: systems. IEEE Transactions on Reliability, 64(4): 1140–1157

    Google Scholar 

  • Shen J, Cui L, Du S (2015). Birnbaum importance for linear consecutive-k-out-of-n systems with sparse d. IEEE Transactions on Reliability, 64(1): 359–375

    Google Scholar 

  • Shen K, Xie M (1990). On the increase of system reliability by parallel redundancy. IEEE Transactions on Reliability, 39(5): 607–611

    MATH  Google Scholar 

  • Shojaei M, Mahani A (2019). Efficient reliability-redundancy allocation with uniform importance measure in presence of correlated failure. International Journal of Computers and Applications, 41(5): 378–391

    Google Scholar 

  • Si S B, Dui H Y, Cai Z Q, Sun S D (2012a). The integrated importance measure of multi-state coherent systems for maintenance processes. IEEE Transactions on Reliability, 61(2): 266–273

    Google Scholar 

  • Si S B, Dui H Y, Cai Z Q, Sun S D, Zhang Y F (2012b). Joint integrated importance measure for multi-state transition systems. Communications in Statistics—Theory and Methods, 41(21): 3846–3862

    MathSciNet  MATH  Google Scholar 

  • Si S B, Dui H Y, Zhao X B, Zhang S G, Sun S D (2012c). Integrated importance measure of component states based on loss of system performance. IEEE Transactions on Reliability, 61(1): 192–202

    Google Scholar 

  • Si S B, Levitin G, Dui H Y, Sun S D (2013). Component state-based integrated importance measure for multi-state systems. Reliability Engineering & System Safety, 116: 75–83

    Google Scholar 

  • Si S B, Levitin G, Dui H Y, Sun S D (2014). Importance analysis for reconfigurable systems. Reliability Engineering & System Safety, 126: 72–80

    Google Scholar 

  • Si S B, Liu M L, Jiang Z Y, Jin T D, Cai Z Q (2019). System reliability allocation and optimization based on generalized Birnbaum importance measure. IEEE Transactions on Reliability, 68(3): 831–843

    Google Scholar 

  • Singpurwalla N D (2006). Reliability and Risk: A Bayesian Perspective. Hoboken: John Wiley & Sons

    MATH  Google Scholar 

  • Su H, Zhang J J, Zio E, Yang N, Li X Y, Zhang Z J (2018). An integrated systemic method for supply reliability assessment of natural gas pipeline networks. Applied Energy, 209: 489–501

    Google Scholar 

  • Tian Z G, Zuo M J, Huang H Z (2008). Reliability-redundancy allocation for multi-state series-parallel systems. IEEE Transactions on Reliability, 57(2): 303–310

    Google Scholar 

  • Tillman F A, Hwang C L, Kuo W (1977). Optimization techniques for system reliability with redundancy: A review. IEEE Transactions on Reliability, R-26(3): 148–155

    MathSciNet  MATH  Google Scholar 

  • Vu H C, Do P, Barros A (2016). A stationary grouping maintenance strategy using mean residual life and the Birnbaum importance measure for complex structures. IEEE Transactions on Reliability, 65 (1): 217–234

    Google Scholar 

  • Wang L H, Ma D H, Han X, Wang W (2019). Optimization for postearthquake resilient power system capacity restoration based on the degree of discreteness method. Mathematical Problems in Engineering, 5489067

    Google Scholar 

  • Wang N, Zhao J B, Jiang Z Y, Zhang S (2018). Reliability optimization of systems with component improvement cost based on importance measure. Advances in Mechanical Engineering, 10(11): 1–15

    Google Scholar 

  • Wu S M, Chan L Y (2003). Performance utility-analysis of multi-state systems. IEEE Transactions on Reliability, 52(1): 14–21

    Google Scholar 

  • Wu S M, Chen Y, Wu Q T, Wang Z L (2016). Linking component importance to optimization of preventive maintenance policy. Reliability Engineering & System Safety, 146: 26–32

    Google Scholar 

  • Wu S M, Coolen F P A (2013). A cost-based importance measure for system components: An extension of the Birnbaum importance. European Journal of Operational Research, 225(1): 189–195

    MathSciNet  MATH  Google Scholar 

  • Wu X Y, Wu X Y (2017). An importance based algorithm for reliability-redundancy allocation of phased-mission systems. In: Proceedings of International Conference on Software Quality, Reliability and Security Companion. Prague: IEEE, 152–159

    Google Scholar 

  • Wu X Y, Wu X Y, Balakrishnan N (2018). Reliability allocation model and algorithm for phased-mission systems with uncertain component parameters based on importance measure. Reliability Engineering & System Safety, 180: 266–276

    Google Scholar 

  • Xiahou T F, Liu Y, Jiang T (2018). Extended composite importance measures for multi-state systems with epistemic uncertainty of state assignment. Mechanical Systems and Signal Processing, 109: 305–329

    Google Scholar 

  • Xiang S H, Yang J (2018). Performance reliability evaluation for mobile ad hoc networks. Reliability Engineering & System Safety, 169: 32–39

    Google Scholar 

  • Xiao R S, Xiang Y M, Wang L F, Xie K G (2018). Power system reliability evaluation incorporating dynamic thermal rating and network topology optimization. IEEE Transactions on Power Systems, 33(6): 6000–6012

    Google Scholar 

  • Xie M, Shen K (1989). On ranking of system components with respect to different improvement actions. Microelectronics and Reliability, 29 (2): 159–164

    MathSciNet  Google Scholar 

  • Xing L D, Dugan J B (2002). Analysis of generalized phased-mission system reliability, performance, and sensitivity. IEEE Transactions on Reliability, 51(2): 199–211

    Google Scholar 

  • Xiong G Z, Zhang C, Zhou F (2017). A robust reliability redundancy allocation problem under abnormal external failures guided by a new importance measure. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 231(2): 180–199

    Google Scholar 

  • Xu Z P, Ramirez-Marquez J E, Liu Y, Xiahou T F (2020). A new resilience-based component importance measure for multi-state networks. Reliability Engineering & System Safety, 193: 106591

    Google Scholar 

  • Yao Q, Zhu X, Kuo W (2011). Heuristics for component assignment problems based on the Birnbaum importance. HE Transactions, 43 (9): 633–646

    Google Scholar 

  • Yao Q, Zhu X, Kuo W (2014). A Birnbaum-importance based genetic local search algorithm for component assignment problems. Annals of Operations Research, 212(1): 185–200

    MathSciNet  MATH  Google Scholar 

  • Yeh W C (2019). A novel boundary swarm optimization method for reliability redundancy allocation problems. Reliability Engineering & System Safety, 192: 106060

    Google Scholar 

  • Yeh W C, Chu T C (2018). A novel multi-distribution multi-state flow network and its reliability optimization problem. Reliability Engineering & System Safety, 176: 209–217

    Google Scholar 

  • Yeh W C, Hsieh T J (2011). Solving reliability redundancy allocation problems using an artificial bee colony algorithm. Computers & Operations Research, 38(11): 1465–1473

    MathSciNet  Google Scholar 

  • Yu H, Yang J, Lin J, Zhao Y (2017). Reliability evaluation of non-repairable phased-mission common bus systems with common cause failures. Computers & Industrial Engineering, 111: 445–457

    Google Scholar 

  • Yu J W, Zheng S L, Pham H, Chen T (2018). Reliability modeling of multi-state degraded repairable systems and its applications to automotive systems. Quality and Reliability Engineering Interna-tional, 34(3): 459–474

    Google Scholar 

  • Zaretalab A, Hajipour V, Tavana M (2020). Redundancy allocation problem with multi-state component systems and reliable supplier selection. Reliability Engineering & System Safety, 193: 106629

    Google Scholar 

  • Zhang S, Zhao J B, Li H G, Wang N (2017). Reliability optimization and importance analysis of circular-consecutive k-out-of-n system. Mathematical Problems in Engineering, 1831537

    Google Scholar 

  • Zhang S, Zhao J B, Zhu W J, Du L (2019). Reliability optimization of linear consecutive fc-out-of-n: F systems with Birnbaum importance-based quantum genetic algorithm. Advances in Mechanical Engineering, 11(4): 1–16

    Google Scholar 

  • Zhao J B, Cai Z Q, Si W T, Zhang S (2019a). Mission success evaluation of repairable phased-mission systems with spare parts. Computers & Industrial Engineering, 132: 248–259

    Google Scholar 

  • Zhao J B, Si S B, Cai Z Q (2019b). A multi-objective reliability optimization for reconfigurable systems considering components degradation. Reliability Engineering & System Safety, 183: 104–115

    Google Scholar 

  • Zhao J B, Si S B, Cai Z Q, Su M, Wang W (2019c). Multiobjective optimization of reliability-redundancy allocation problems for serial parallel-series systems based on importance measure. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 233(5): 881–897

    Google Scholar 

  • Zhao X B, Si S B, Dui H Y, Cai Z Q, Sun S D (2013). Integrated importance measure for multi-state coherent systems of k level. Journal of Systems Engineering and Electronics, 24(6): 1029–1037

    Google Scholar 

  • Zhu X Y, Yao Q Z, Kuo W (2011). Birnbaum importance in solving component assignment problems. In: Proceedings of Annual Reliability and Maintainability Symposium. Lake Buena Vista, FL: IEEE, 1–6

    Google Scholar 

  • Zhu X Y, Fu Y Q, Yuan T, Wu X Y (2017). Birnbaum importance based heuristics for multi-type component assignment problems. Reliability Engineering & System Safety, 165: 209–221

    Google Scholar 

  • Zio E, Marella M, Podofillini L (2007). Importance measures-based prioritization for improving the performance of multi-state systems: Application to the railway industry. Reliability Engineering & System Safety, 92(10): 1303–1314

    Google Scholar 

  • Zio E, Podofillini L (2003a). Importance measures of multi-state components in multi-state systems. International Journal of Reliability Quality and Safety Engineering, 10(3): 289–310

    Google Scholar 

  • Zio E, Podofillini L (2003b). Monte Carlo simulation analysis of the effects of different system performance levels on the importance of multi-state components. Reliability Engineering & System Safety, 82 (1): 63–73

    Google Scholar 

  • Zio E, Podofillini L (2007). Importance measures and genetic algorithms for designing a risk-informed optimally balanced system. Reliability Engineering & System Safety, 92(10): 1435–1447

    Google Scholar 

  • Zuo M, Kuo W (1990). Design and performance analysis of consecutive-k-out-of-n structure. Naval Research Logistics, 37(2): 203–230

    MathSciNet  MATH  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an, 710072, China

    Shubin Si, Jiangbin Zhao & Zhiqiang Cai

  2. Ministry of Industry and Information Technology Key Laboratory of Industrial Engineering and Intelligent Manufacturing, Northwestern Polytechnical University, Xi’an, 710072, China

    Shubin Si, Jiangbin Zhao & Zhiqiang Cai

  3. School of Management Engineering, Zhengzhou University, Zhengzhou, 450001, China

    Hongyan Dui

Authors
  1. Shubin Si
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Jiangbin Zhao
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Zhiqiang Cai
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Hongyan Dui
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Shubin Si.

Additional information

This work was funded by the National Natural Science Foundation of China (Grant Nos. 71771186, 71631001, and 71871181) and the 111 Project (Grant No. B13044).

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Si, S., Zhao, J., Cai, Z. et al. Recent advances in system reliability optimization driven by importance measures. Front. Eng. Manag. 7, 335–358 (2020). https://doi.org/10.1007/s42524-020-0112-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s42524-020-0112-6

Keywords

Search

Navigation