Skip to main content
SpringerLink
Log in

Numerical Analysis of a Rock Bolt Load Indicator Washer Neglecting the Stress Relaxation Effect

  • Technical Note
  • Published:
Mining, Metallurgy & Exploration Aims and scope Submit manuscript

Abstract

Rock bolts are components of tunnel support structures and their efficacy in reinforcement requires the appropriate estimation of the bolt pre-tension. However, cases of ineffective rock bolt application due to loosening are common which leads to the potential failure of the support structures, thus negatively affecting the tunnel stability. The effective employment of pre-tensioned bolt within support structures requires an appropriate installation tension as a result of sufficient bolt head/nut pre-load. Henceforth, this paper presents a load indicator washer (LIW) capable of withstanding assigned static loading as well as provides an appropriate pre-tension. The different LIW breadths are numerically analysed in the finite element code (ABAQUS) to estimate deformation when a designated 60-kN pre-load is applied. The numerical simulation employs a bi-linear isotropic hardening constitutive law governed by the von Mises yield criterion. The simulation also considers the nominal temperature of the nut-LIW-rock bolt connection. Therefore, a long-term relaxation effect on bolt pre-tension as a result of stress relaxation is neglected. The compressive force required to achieve the LIW-predetermined deformation is the bolt pre-tension. It is drawn from the simulation results that the 1.5-, 2.0-, 3.0-, 3.5-, and 4.0-mm-thick LIWs are completely flattened when subjected to 28-, 42.5-, 65-, 76-, and 88-kN pre-load respectively.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13

References

  1. Bobet A, Einstein HH (2011) Tunnel reinforcement with rock bolts. Tunn Undergr Space Technol 26(1):100–123

    Article  Google Scholar 

  2. Kabwe E, Wang Y (2015) Review on rockburst theory and types of rock support in rockburst prone mines. Open J Saf Sci Technol 5(04):104

    Article  Google Scholar 

  3. Liang Y, He M, Cao C, Wang S, Ren T (2017) A mechanical model for conebolts. Comput Geotech 83:142–151

    Article  Google Scholar 

  4. Li CC, Stjern G, Myrvang A (2014) A review on the performance of conventional and energy-absorbing rockbolts. J Rock Mech Geotech Eng 6(4):315–327

    Article  Google Scholar 

  5. Spearing S, Hyett A, Kostecki T, Gadde M (2013) New technology for measuring the in-situ performance of rock bolts. Int J Rock Mech Min Sci 57:153–166

    Article  Google Scholar 

  6. Li CC (2017) Rockbolting: principles and applications. Butterworth-Heinemann

  7. Ghadimi M, Shahriar K, Jalalifar H (2014) Analysis profile of the fully grouted rock bolt in jointed rock using analytical and numerical methods. Int J Min Sci Technol 24(5):609–615

    Article  Google Scholar 

  8. Chen Y (2014) Experimental study and stress analysis of rock bolt anchorage performance. J Rock Mech Geotech Eng 6(5):428–437

    Article  Google Scholar 

  9. Bjurstrom, S. (1974). Shear strength of hard rock joints reinforced by grouted untensioned bolts. Proceedings of the 3rd International Congress on Rock Mechanics. Washington, DC: National Academy of Sciences, 2(Part B), 1194–1199

  10. Chen Y, Li CC (2015) Performance of fully encapsulated rebar bolts and D-bolts under combined pull-and-shear loading. Tunn Undergr Space Technol 45:99–106

    Article  Google Scholar 

  11. Phares B, Lee YS, Brockman T, Rooney J (2016) Investigation of high-strength bolt-tightening verification techniques. InTrans Project Report 184

  12. Amiss JM, Jones FD, Ryffel HH, McCauley CJ, Heald R (2004) Machinery’s handbook guide 27. Industrial Press Inc.

  13. Clarke, R. (2003). U.S. patent no. 2003/0190210. Phoenix, AZ: U.S. Patent and Trademark Office

  14. Nassar SA, Yang X (2008) Torque-angle formulation of threaded fastener tightening. J Mech Des 130(2):024501

    Article  Google Scholar 

  15. Spengler, E.D., & Schaeffer, C.W. (1979). U.S. patent no. 4149446. Lebanon, PA: U.S. Patent and Trademark Office

  16. Zhang X, Wang X, Luo Y (2012) An improved torque method for preload control in precision assembly of the miniature bolt joints. Strojniški vestnik-J Mech Eng 58(10):578–586

    Article  Google Scholar 

  17. Li CC, Kristjansson G, Høien AH (2016) Critical embedment length and bond strength of fully encapsulated rebar rockbolts. Tunn Undergr Space Technol 59:16–23

    Article  Google Scholar 

  18. Nijgh MP (2016) Loss of preload in pretensioned bolts. Minor thesis, Delft University of Technology http://resolver.tudelft.nl/uuid:4776e217-d7b7-4122-8e36-61ab7ed8c672

  19. Yang J, DeWolf JT (2000) Relaxation in high-strength bolted connections using galvanized steel. J Bridg Eng 5(2):99–106

    Article  Google Scholar 

  20. Reuther D, Baker I, Yetka A, Cleary DB, Riddell W (2014) Relaxation of ASTM A325 bolted assemblies. J Struct Eng 140(9):04014060

    Article  Google Scholar 

  21. Shoji, Y., & Sawa, T. (2008). Analytical research on mechanism of bolt loosening due to lateral loads. In ASME 2005 Pressure Vessels and Piping Conference (pp. 59-65). American Society of Mechanical Engineers Digital Collection

  22. Abid M, Khalil MS, Wajid HA (2015) An experimental study on the relaxation of bolts. IIUM Eng J 16(1)

  23. Bickford JH (2007) Introduction to the design and behavior of bolted joints: non-gasketed joints. CRC press

Download references

Author information

Authors and Affiliations

  1. School of Civil, Environmental and Mining Engineering, The University of Adelaide, Adelaide, 5005, Australia

    Eugie Kabwe

Authors
  1. Eugie Kabwe
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Eugie Kabwe.

Ethics declarations

Conflict of Interest

The author declares that he has no conflict of interest.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kabwe, E. Numerical Analysis of a Rock Bolt Load Indicator Washer Neglecting the Stress Relaxation Effect. Mining, Metallurgy & Exploration 37, 691–700 (2020). https://doi.org/10.1007/s42461-020-00187-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s42461-020-00187-9

Keywords

Search

Navigation