Abstract
With Kane dynamics theory, the multi-body dynamic models of deployable struts are established with considering the clearance root-joint and the deployable style and deployable process of the struts are studied. The dynamic performance of struts’ deployment is analyzed, such as geometric position, velocity, and acceleration, seeking the inherent regularity of each joint’s motion characteristics. The results show that root-joint’s clearance has almost no influence on the rotation angle and angular velocity of base strut, but to some extent effect on the angular acceleration of base strut. Amplitude of angular acceleration appears significant fluctuations in 0–2 s and stabilizes gradually, indicating the pin in the bush is in the state of constant contact and separation. The dynamic model of deployable struts considering root-joint’s clearance represents more realistically the dynamic characteristics of this system. The different hinges suffer different contact forces, and its impact how effects on the mechanism movement is different. Therefore, Analysis of the dynamic performance and design of deployable struts need to consider the impact of hinge clearance, which gain the motion characteristics of important parts during deploying process, providing guidance for future design of mechanisms and driving forces.
Similar content being viewed by others
References
Liu Z-q, Yang S-l, Pu H-l (2012) Development and trend of space solar array technology. Spacecr Eng 21(6):112–118
Botke M, Murphy D, Murphey T, et al (2002) Zero deadband, multiple strut synchronized hinge for deployable structures. In: Proceedings of the 36th Aerospace Mechanisms Symposium, Glenn Research Center, May 15–17, 2002
Wang G-x, Liu H-z (2015) Dynamics analysis of 4-SPS/CU parallel mechanism with spherical joint clearance. J Mech Eng 51 (1): 43–51
Li Y-b, Xu T-t et al (2020) Dynamic characteristics of spatial parallel mechanism with spherical joint clearance. J Zhejiang Univ (Engineering Science) 54(2):348–356
Wang W, Sun J, Yu D-y et al (2004) Analytical model for complex joint with latch mechanism of space structure. J Astronaut 25(1):1–5
Adler AL, Hague N, Spanjers G, et al (2003) Powersail-the challenges of large, planar, surface structures for space applications. In: 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, April 7–10, 2003
Eskenazi M, White S, Spence B et al (2005) Promising results from three NASA SBIR solar array technology development programs. NASA/CP-2005-213431:59–94
Yang Z, Zheng-feng B, Xing-gui W (2010) Dynamics analysis of two-axis-position mechanism of satellite antennas with joint clearance. J Astronaut 31(6):1533–1539
Yang Z, Zheng FB (2011) Dynamics analysis of space robot manipulator with joint clearance. Acta Astronaut 68(7):1147–1155
Funding
No external funding was used.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no competing interests.
Ethical approval
All procedures performed in studies involving human participants were in accordance with the ethical standards of the institutional and/or national research committee and with the 1964 Helsinki declaration and its later amendments or comparable ethical standards.
Rights and permissions
About this article
Cite this article
Yang, S., Shao, L. & Wang, Y. Dynamic Analysis of Deployable Strut-Mechanism with Clearance Root-Joints for Spacial Flexible Solar Array. Adv. Astronaut. Sci. Technol. 5, 241–249 (2022). https://doi.org/10.1007/s42423-022-00124-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42423-022-00124-6