Abstract
Implantable cardiac pacemaker was used to maintain the rhythmic action of heart with precise and continuous monitoring in modern healthcare technology. Battery was mostly used for pacemaker power sources. However, the implantable pacemaker reaches a very low power level, and may be forced to surgically transfer a new battery after ending its life cycle, thus cause medical difficulties and incur costs. To overcome this issues, a battery-less cardiac pacemaker was developed to provide a constant cardiac rhythm and avoid surgical issues. Here, a thermoelectric generator (TEG) that generates power based on human body temperature was used instead of battery. Yet the TEG generated power is not sufficient for all condition which cause fluctuation in pacemaker. So the TEG was connected to a DC-DC converter and pacemaker to act boost, buck-boost and buck. To track the TEG power, a maximum power point tracking (MPPT) was linked which produce an appropriate pulse signal for the converter to make a stable operation. The proposed model was designed and the performance were validated in Cadence Capture Orcad tool. Further the performance of designed model was validated under various conditions like common pacemaker, only TEG, TEG with pacemaker, TEG with MPPT in boost pacemaker, TEG with MPPT in buck pacemaker and TEG with MPPT in buck-boost pacemaker. The proposed DC-DC converter based pacemaker provide a stable power of 2 W under any human body temperature conditions. Furthermore the proposed model prototype was designed to analyse its performance and compared to simulation output for validation. In both simulation and prototype analysis, the proposed design provide a similar output voltage of 1.7 V at any temperature. So the proposed pacemaker model was more suitable for all atmospheric condition and the usage of MPPT generate a suitable pulse for converter to make a stable operation.
Similar content being viewed by others
Data Availability
Not applicable.
Code Availability
Not applicable.
References
M. Romanò, in Deactivation of Cardiac Implantable Electronic Devices (CIEDs) at the End of Life. Palliative Care in Cardiac Intensive Care Units (2021), pp. 113-129
H.G. Mond, M. Villafaña, Celebrating 50 years of the lithium power source for cardiac pacemakers. Heart Rhythm 18(3), 491–492 (2021)
C.J. McLeod, A. Chiriac, M. Madhavan, D.L. Hayes, P.A. Friedman, S.J. Asirvatham, in Choosing the Device Generator and Leads: Matching the Device with the Patient. Cardiac Pacing, Defibrillation and Resynchronization: A Clinical Approach (2021), pp. 125–148
Y. Zhang, X. Gao, Y. Wu, J. Gui, S. Guo, H. Zheng, Z.L. Wang, Self-powered technology based on nanogenerators for biomedical applications. InExploration. 1(1), 90–114 (2021)
G.A. Engwa, P.U. Ferdinand, F.N. Nwalo, M.N. Unachukwu, Mechanism and health effects of heavy metal toxicity in humans. Poisoning Mod. World-new Tricks Old Dog 10, 70–90 (2019)
H. You, Z. Li, Y. Shao, X. Yuan, W. Liu, H. Tang, Q. Zhang, Y. Yan, X. Tang, Flexible Bi2Te3-based thermoelectric generator with an ultra-high power density. Appl. Therm. Eng. 202, 117818 (2022)
S. Thébaud, Electron and phonon transport in disordered thermoelectric materials: dimensional confinement, resonant scattering and localization (Doctoral dissertation, Université de Lyon, 2019)
H. Jouhara, A. Żabnieńska-Góra, N. Khordehgah, Q. Doraghi, L. Ahmad, L. Norman, B. Axcell, L. Wrobel, S. Dai, Thermoelectric generator (TEG) technologies and applications. Int. J. Therm. 9, 100063 (2021)
L. Liu, X. Guo, W. Liu, C. Lee, Recent progress in the energy harvesting technology—from self-powered sensors to self-sustained IoT, and new applications. Nanomaterials 11(11), 2975 (2021)
E.F. Mohsin, T. Tashan, E.H. Karam, Design and FPGA implementation of immune-PID controller based on BBO algorithm for heart rate regulation. Int. J. Intell. Eng. Syst. 14(2), 432–440 (2021)
Y.S. Noh, J.I. Seo, H.S. Kim, S.G. Lee, A reconfigurable DC-DC converter for maximum thermoelectric energy harvesting in a battery-powered duty-cycling wireless sensor node. IEEE J. Solid-State Circuits 57(9), 2719–2730 (2022)
M. Surti, V. Shah, Y. Makadiya, K. Shah, M. Padhya, in Exploring Cyber Security Issues in the Internet of Healthcare Things (IoHT) with Potential Improvements. Information and Communication Technology for Competitive Strategies (ICTCS 2022) Intelligent Strategies for ICT (Springer Nature, Singapore, 2023), pp. 569–585
R.F. Fonkou, P. Louodop, P.K. Talla, P. Woafo, Dynamic behavior of pacemaker models subjected to a arterial pressure excitation simulator: theoretical and experimental study by microcontroller. Braz. J. Phys. 51, 1448–1458 (2021)
J. Wang, Z. Sun, S. Tao, Torsade de pointes caused by citalopram during the pacemaker battery-depletion phase: a case report. Ann. Noninvasive Electrocardiol. 27(4), e12936 (2022)
D. Sharma, B.K. Kanaujia, V. Kaim, R. Mittra, R.K. Arya, L. Matekovits, Design and implementation of compact dual-band conformal antenna for leadless cardiac pacemaker system. Sci. Rep. 12(1), 3165 (2022)
K. Nakamura, T. Aoyama, N. Kaneda, M. Otsuji, Y. Minami, A. Sakuragi, M. Nakamura, Implantable cardiac pacemaker failure by cumulative dose effects of flattening filter free beams. J. Radiat. Res. 62(4), 735–739 (2021)
S. Azimi, A. Golabchi, A. Nekookar, S. Rabbani, M.H. Amiri, K. Asadi, M.M. Abolhasani, Self-powered cardiac pacemaker by piezoelectric polymer nanogenerator implant. Nano Energy 83, 105781 (2021)
J. Xu, Z. Yu, Y. Wang, R. Zhang, H. Zhang, High-sensitivity ultra-low-power electrode resistance monitoring circuit for cardiac pacemakers. Analog Integr. Circ. Sig. Process 109, 479–485 (2021)
Y. Feng, Z. Li, L. Qi, W. Shen, G. Li, A compact and miniaturized implantable antenna for ISM band in wireless cardiac pacemaker system. Sci. Rep. 12(1), 238 (2022)
R. Srivastava, B. Kumar, Design of Anfis based pacemaker controller having improved transient response and its FPGA implementation. Biomed. Signal Process. Control 71, 103186 (2022)
N. Jafarnia, A. Dabiriaghdam, F.N. Rahatabad, K. Maghooli, An interval type-2 adaptive neuro-fuzzy inference system based, artificial pacemaker design and stability analysis. J. Long-Term Eff. Med. Implants (2022)
Z. He, C. Yao, S. Liu, Y. Qian, Transmission of pacemaker signal in a small world neuronal networks: temperature effects. Nonlinear Dyn. 106, 2547–2557 (2021)
C. Yuan, S. Kreß, G. Sadashivaiah, E.B. Rudnyi, D. Hohlfeld, T. Bechtold, Towards efficient design optimization of a miniaturized thermoelectric generator for electrically active implants via model order reduction and submodeling technique. Int. J. Numer. Method. Biomed. Eng. 36(4), e3311 (2020)
A. Alzahrani, A fast and accurate maximum power point tracking approach based on neural network assisted fractional open-circuit voltage. Electronics 9(12), 2206 (2020)
S.M. Ghamari, H. Mollaee, F. Khavari, Robust self-tuning regressive adaptive controller design for a DC–DC BUCK converter. Measurement 174, 109071 (2021)
M. Zaid, S. Khan, M.D. Siddique, A. Sarwar, J. Ahmad, Z. Sarwer, A. Iqbal, A transformerless high gain dc–dc boost converter with reduced voltage stress. Int. Trans. Electr. Energy Syst. 31(5), e12877 (2021)
M.I. Guerra, F.M. Ugulino de Araújo, M. Dhimish, R.G. Vieira, Assessing maximum power point tracking intelligent techniques on a PV system with a buck–boost converter. Energies 14(22), 7453 (2021)
L.J. Ruiz, M. Ridder, D. Fan, J. Gong, B.M. Li, A.C. Mills, E. Cobarrubias, J. Strohmaier, J.S. Jur, J. Lach, Self-powered cardiac monitoring: maintaining vigilance with multi-modal harvesting and E-textiles. IEEE Sens. J. 21(2), 2263–2276 (2020)
S. Maji, U. Banerjee, S.H. Fuller, M.R. Abdelhamid, P.M. Nadeau, R.T. Yazicigil, A.P. Chandrakasan, in A Low-Power Dual-Factor Authentication Unit for Secure Implantable Devices. 2020 IEEE Custom Integrated Circuits Conference (CICC) (IEEE, 2020), pp. 1–4
G. Singh, S. Kundu, An efficient DC-DC boost converter for thermoelectric energy harvesting. AEU-Int. J. Electron. Commun. 118, 153132 (2020)
Funding
The authors declare that no funds, grants, or other support were received during the preparation of this manuscript.
Author information
Authors and Affiliations
Contributions
The corresponding author claims the major contribution of the paper including formulation, analysis and editing. The co-author provides guidance to verify the analysis result and manuscript editing.
Corresponding author
Ethics declarations
Conflict of interest
The authors declared that they have no conflicts of interest to this work. We declare that we do not have any commercial or associative interest that represents a conflict of interest in connection with the work submitted.
Ethical Approval
This article is a completely original work of its authors; it has not been published before and will not be sent to other publications until the journal’s editorial board decides not to accept it for publication.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Shwetha, M., Lakshmi, S. Harmless Sustainable Energy Resource using TEG with MPPT Based DC-DC Converter for Power Gain in Implantable Medical Devices. Trans. Electr. Electron. Mater. (2024). https://doi.org/10.1007/s42341-024-00539-y
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s42341-024-00539-y