Skip to main content

Evaluation of energy use intensity (EUI) and energy cost of commercial building in India using BIM technology


Large amount of energy is being consumed by the buildings at its operational phase and it is one of the significant source of carbon discharge throughout their service life, which directly affects global warming. Therefore, it is essential to optimize energy use intensity (EUI) as well as energy cost with the utilization of the building information modeling technology (BIM) to perform energy analysis. Objective of the study is to study modeling software for energy simulation and to evaluate different measures by altering design criteria’s and thereby reducing energy consumption for achieving best energy-efficient building in terms of EUI and energy cost. In this study, an attempt has been made to evaluate the EUI and energy cost of a commercial building located in Vadodara City, Gujarat, India. Modeling of the building is performed by utilizing Autodesk Revit Architecture, and further for energy analysis, Autodesk Insight is used. These study targets are to provide energy-efficient building by varying different design strategies with respect to EUI and energy cost based on ASHRAE 90.1 standards. It is observed that with the minor variation in design strategies causes large percentage of difference in the EUI as well as energy cost. Present work concludes from the energy analysis that energy cost can be reduced up to a great extent by implementing BIM which is helpful to implement better design options prior to construction of building by optimizing annual energy budget incurred compared to traditional methods which may involve errors in computations.

This is a preview of subscription content, access via your institution.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26

Availability of data and materials (data transparency)

All the data in the .xlxs format have been provided and it is done by the authors.


  1. Abanda, F. H., & Byers, L. (2016). An investigation of the impact of building orientation on energy consumption in a domestic building using emerging BIM (building information modelling). Energy, 97, 517–527.

    Article  Google Scholar 

  2. Abdullah, A., Cross, B., & Will, P. (2014). Whole building energy analysis: A comparative study of different simulation tools and applications in architectural design (pp. 1–12). New York: Springer.

    Google Scholar 

  3. Ashmawy, R. E., & Azmy, N. Y. (2018). Buildings orientation and its impact on the energy consumption. Academic Research Community Publication, 2(3), 35.

    Article  Google Scholar 

  4. Attellah, A., Shoshan, A., & Haseeb, Q. S. (2019). Analysis and reduction of energy consumption in educational buildings: A case study in the college of education for pure sciences at the University of Kirkuk. International Journal of Civil Engineering and Technology 10(03), 768–778.

  5. Azhar, S., Brown, J., & Farooqui, R. (2009). BIM-based sustainability analysis: An evaluation of building performance analysis software. In Proceedings of the 45th ASC annual conference, January, pp. 1–4.

  6. Chen, C. J., Chen, S. Y., Li, S. H., & Chiu, H. T. (2017). Green BIM-based building energy performance analysis. Computer-Aided Design and Applications, 14(5), 650–660.

    Article  Google Scholar 

  7. Chen, S. Y. (2018). A green building information modelling approach: Building energy performance analysis and design optimization. MATEC Web of Conferences.

    Article  Google Scholar 

  8. Deepa, K., Suryarajan, B., Nagaraj, V., Srinath, K., & Vasanth, K. (2008). Energy analysis of buildings. International Research Journal of Engineering and Technology, 1662.

  9. Ebrahim, A., & Wayal, A. S. (2019). BIM based building performance analysis of a green office building. International Journal of Science Engineering and Technology, 8(8), 566–573.

    Google Scholar 

  10. Hasan, R., Islam, S., & Akter, J. (2018). Energy performance analysis of an office building. Energy Building, 7(3), 34–53.

    Article  Google Scholar 

  11. Jadhav, G. D., Kumthekar, M. B., & Magdum, J. S. (2017). Building information modeling (BIM) a new approach towards project management. International Journal of Engineering Research & Technology 10(1), 143–148.

  12. Jangalve, A., Kamble, V., Gawandi, S., & Ramani, N. (2017). Energy analysis of residential building using BIM. International Journal of Emerging Engineering Technology and Science, 108, 15–19.

    Google Scholar 

  13. Khan, A., & Ghadg, A. N. (2019). Building information modelling (BIM) based sustainability analysis for a construction project. SSRN Electronic Journal.

    Article  Google Scholar 

  14. Lung, L. (2019). Using BIM to simulate the energy consumption and reduce its cost. International Journal of Innovation, Management and Technology, 10, 21–26.

    Article  Google Scholar 

  15. Luziani, S., & Paramita, B. (2019). Autodesk green building studio an energy simulation analysis in the design process. KnE Social Science.

    Article  Google Scholar 

  16. Moakher, E. P. E. (2012). Building information modeling (BIM) and sustainability—using design technology in energy efficient modeling. IOSR Journal of Mechanical and Civil Engineering, 1(2), 10–21.

    Article  Google Scholar 

  17. Morrissey, J., Moore, T., & Horne, R. E. (2011). Affordable passive solar design in a temperate climate: An experiment in residential building orientation. Renewable Energy, 36(2), 568–577.

    Article  Google Scholar 

  18. Nalamwar, M. R., Parbat, D. K., & Singh, D. P. (2016). Optimum building orientation study for Central India by simulation. International Journal on Theoretical and Applied Research in Mechanical Engineering, 5(3), 25–27.

    Google Scholar 

  19. Otuh, N. F. (2016). BIM based energy/sustainability analysis for educational buildings—a case study analysis of HAMK building extensions N and S using Autodesk Revit and GBS. Retrieved from

  20. Pathan, G., Borkar, M. M., Bhimte, K. A., Ghorse, V. R., & Ambalkar, P. B. (2019). Comparative study of energy analysis on residential building in Revit Software. International Journal of Advance Research and Innovative Ideas in Education, 2, 1182–1189.

    Google Scholar 

  21. Pathirana, S., Halwatura, R., & Rodrigo, A. (2020). Sustainable approach to energy rating system for residential buildings. Asian Journal of Civil Engineering, 21(8), 1331–1342.

    Article  Google Scholar 

  22. Shaeri, J., Habibi, A., Yaghoubi, M., & Chokhachian, A. (2019). The optimum window-to-wall ratio in office buildings for hot-humid, hot-dry, and cold climates in Iran. Environments MDPI.

    Article  Google Scholar 

  23. Shivsharan, A. S., Vaidya, D. R., & Shinde, P. R. D. (2017). 3D modeling and energy analysis of a residential building using BIM tools. International Research Journal of Engineering and Technology 4(7), 629–636.

  24. Shoubi, M. V., Shoubi, M. V., Bagchi, A., & Barough, A. S. (2015). Reducing the operational energy demand in buildings using building information modeling tools and sustainability approaches. Ain Shams Engineering Journal, 6(1), 41–55.

    Article  Google Scholar 

  25. Siddhartha, M., & Pai, Y. (2015). Effect of building orientation and window glazing on the energy consumption of HVAC system of an office building for different climate zones. International Journal of Engineering Research, 4(09), 838–843.

    Article  Google Scholar 

  26. Singh, P., & Sadhu, A. (2019). Multicomponent energy assessment of buildings using building information modeling. Sustainable Cities and Society, 49(March), 101603.

    Article  Google Scholar 

  27. Stadel, A., Eboli, J., Ryberg, A., Mitchell, J., & Spatari, S. (2011). Intelligent sustainable design: Integration of carbon accounting and building information modeling. Journal of Professional Issues in Engineering Education and Practice, 137(2), 51–54.

    Article  Google Scholar 

  28. Taha, F. F., Hatem, W. A., & Jasim, N. A. (2020). Effectivity of BIM technology in using green energy strategies for construction projects. Asian Journal of Civil Engineering, 21(6), 995–1003.

    Article  Google Scholar 

  29. Unni, U., Soubhagya, K., Anshiba, C. M., Farseen, P., & Haseena, E. (2018). Energy performance evaluation of building. International Journal of Civil Engineering and Technology, 9(5), 978–983.

    Google Scholar 

  30. Yarramsetty, S., Rohullah, M. S., Sivakumar, M. V. N., & Anand Raj, P. (2020). An investigation on energy consumption in residential building with different orientation: A BIM approach. Asian Journal of Civil Engineering, 21(2), 253–266.

    Article  Google Scholar 

Download references

Author information



Corresponding author

Correspondence to Manas Kumar Bhoi.

Ethics declarations

Conflict of interest

The authors declare that they have no known conflicting financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary Information

Below is the link to the electronic supplementary material.

Supplementary file1 (XLSX 1197 KB)

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Mahiwal, S.G., Bhoi, M.K. & Bhatt, N. Evaluation of energy use intensity (EUI) and energy cost of commercial building in India using BIM technology. Asian J Civ Eng 22, 877–894 (2021).

Download citation


  • Building information modeling
  • Energy analysis
  • Energy cost
  • Energy use intensity
  • Energy cost
  • Greenhouse gas emissions
  • Carbon emission
  • Commercial building