Advertisement

Asian Journal of Civil Engineering

, Volume 19, Issue 5, pp 583–593 | Cite as

Investigation of mechanical properties of mortar with mixed recycled aggregates

  • Ali Heidari
  • Masoumeh Hashempour
  • Hamed Javdanian
  • Mehdi Karimian
Original Paper
  • 22 Downloads

Abstract

In this study two phases were considered. In the first phase, demolition of building materials such as concrete, brick, ceramic and tile, and stone were crushed and 30–40% stone, 10–20% ceramic, 5–15% brick, and 50–60% concrete waste were used to produce recycled sand. The initial properties of aggregates such as chemical properties, water absorption, moisture content, density, and abrasion were investigated. In the second phase, the mechanical properties of mortar with substitute of natural aggregates with recycled aggregates from 0 to 100% were examined. In addition, the sand to cement ratio was varied from 2, 2.5, and 3. The results showed that the compressive strength in sand to cement ratio of 3 is higher than other ratios. Water absorption test showed that the use of recycled sand increases the water absorption in all ratios of sand to cement. The flexural strength test showed that the use of 0–40% recycled sand in sand to cement ratio of 2.5 is higher than other specimens, but by increasing the waste to between 50 and 70%, specimens with sand to cement ratio of 3 have higher result. Increasing the recycled sand to 100%, produced higher results for sand to cement of 2. Additionally, backpropagation neural network was used to estimate the mechanical properties of mortar. With regression of up to 70% and mean standard error lower than 0.3, this network has good precision to predict the mortar properties.

Keywords

Waste concrete Backpropagation neural network Recycled aggregate Mechanical properties 

References

  1. Abu Yaman, M., Abd Elaty, M., & Taman, M. (2017). Predicting the ingredients of self-compacting concrete using artificial neural network. Alexandria Engineering Journal, 56(4), 523–532.CrossRefGoogle Scholar
  2. Adamson, M., Razmjoo, A., & Poursaee, A. (2015). Durability of concrete incorporating crushed brick as coarse aggregate. Construction and Building Materials, 94, 426–432.CrossRefGoogle Scholar
  3. Anderson, D. J., Smith, S. T., & Au, F. T. K. (2016). Mechanical properties of concrete utilizing waste ceramic as coarse aggregate. Construction and Building Materials, 117, 20–28.CrossRefGoogle Scholar
  4. Asghshahr, M. S., Rahai, A., & Ashrafi, H. (2016). Prediction of chloride content in concrete using ANN and CART. Magazine of Concrete Research, 68(21), 1085–1098.CrossRefGoogle Scholar
  5. Dogan, E. (2008). Reference evapotranspiration estimation using adaptive neuro-fuzzy inference system. Journal of Irrigation and Drainage, 58(5), 617–628.CrossRefGoogle Scholar
  6. Geng, J., & Sun, J. (2013). Characteristics of the carbonation resistance of recycled fine aggregate concrete. Construction and Building Materials, 49, 814–820.CrossRefGoogle Scholar
  7. González, J. S., Gayarre, F. L., Pérez, C. L.-C., Ros, P. S., & López, M. A. S. (2017). Influence of recycled brick aggregates on properties of structural concrete for manufacturing precast prestressed beams. Construction and Building Materials, 149, 507–514.CrossRefGoogle Scholar
  8. Gonzalez-Corominas, A., & Etxeberria, M. (2014). Properties of high performance concrete made with recycled fine ceramic and coarse mixed aggregates. Construction and Building Materials, 68, 618–626.CrossRefGoogle Scholar
  9. González-Taboada, I., González-Fonteboa, B., Martínez-Abella, F., & Seara-Paz, S. (2017). Analysis of rheological behaviour of self-compacting concrete made with recycled aggregates. Construction and Building Materials, 157, 18–25.CrossRefGoogle Scholar
  10. Guedes, M., Evangelista, L., Ferro, A. C., & de Brito, J. (2013). Microstructure of concrete prepared with construction recycled aggregates. Microscopy and Microanalysis, 19, 147–148.CrossRefGoogle Scholar
  11. Halicka, A., Ogrodnik, P., & Zegardlo, B. (2013). Using ceramic sanitary ware waste as concrete aggregate. Construction and Building Materials, 48, 295–305.CrossRefGoogle Scholar
  12. Heidari, A., & Hasanpour, B. (2013). Effects of waste bricks powder of Gachsaran company as a pozzolanic material in concrete. Asian Journal of Civil Engineering, 14(5), 755–763.Google Scholar
  13. Heidari, A., Hashempour, M., & Tavakoli, D. (2017). Using of backpropagation neural network in estimating of compressive strength of waste concrete. Soft Computing in Civil Engineering, 1(1), 54–64.Google Scholar
  14. Heidari, A., & Tavakoli, D. (2013). A study of the mechanical properties of ground ceramic powder concrete incorporating nano-SiO2 particles. Construction and Building Materials, 38, 255–264.CrossRefGoogle Scholar
  15. Kannan, D. M., Aboubakr, S. H., El-Dieb, A. S., & Reda Taha, M. M. (2017). High performance concrete incorporating ceramic waste powder as large partial replacement of Portland cement. Construction and Building Materials, 144, 35–41.CrossRefGoogle Scholar
  16. Kaveh, A., & Khaleghi, A. (2000). Prediction of strength for concrete specimens using artificial neural networks. Asian Journal of Civil Engineering, 1(2), 1–12.Google Scholar
  17. Kaveh, A., Fazel-Dehkordi, D., & Servati, H. (2001). Prediction of moment-rotation characteristic for saddle-like connections using FEM and BP neural networks. Asian Journal of Civil Engineering, 2(1), 11–29.Google Scholar
  18. Khademi, F., & Behfarnia, K. (2016). Evaluation of concrete compressive strength using artificial neural network and multiple linear regression models. International Journal of Optimization in Civil Engineering, 6(3), 423–432.Google Scholar
  19. Letelier, V., Tarela, E., & Moriconi, G. (2017). Mechanical properties of concretes with recycled aggregates and waste brick powder as cement replacement. Procedia Engineering, 171, 627–632.CrossRefGoogle Scholar
  20. McGinnis, M. J., Davis, M., De la Rosa, A., Weldon, B. D., & Kurama, Y. C. (2017). Strength and stiffness of concrete with recycled concrete aggregates. Construction and Building Materials, 154, 258–269.CrossRefGoogle Scholar
  21. Muthupriya, P., Subramanian, K., & Vishnuram, B. G. (2011). Prediction of compressive strength and durability of high performance concrete by artificial neural networks. International Journal of Optimization in Civil Engineering, 1(1), 189–209.Google Scholar
  22. Paul, S. C., Panda, B., & Garg, A. (2018). A novel approach in modelling of concrete made with recycled aggregates. Measurement, 115, 64–72.CrossRefGoogle Scholar
  23. Pedro, D., De Brito, J., & Evangelista, L. (2017). Structural concrete with simultaneous incorporation of fine and coarse recycled concrete aggregates: mechanical, durability and long-term properties. Construction and Building Materials, 154, 294–309.CrossRefGoogle Scholar
  24. Silva, R. V., De Brito, J., & Dhir, R. K. (2014). Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production. Construction and Building Materials, 65, 201–217.CrossRefGoogle Scholar
  25. Subaşı, S., Öztürk, H., & Emiroğlu, M. (2017). Utilizing of waste ceramic powders as filler material in self-consolidating concrete. Construction and Building Materials, 149, 567–574.CrossRefGoogle Scholar
  26. Tavakoli, D., Heidari, A., & Karimian, M. (2013). Properties of concretes produced with waste ceramic tile aggregate. Asian Journal of Civil Engineering, 14(3), 369–382.Google Scholar
  27. Tavakoli, D., Heidari, A., & Pilehrood, S. H. (2014). Properties of concrete made with waste clay brick as sands incorporating nano SiO2. Indian Journal of Science and Technology, 7(12), 1899.Google Scholar
  28. Uddin, M. T., Mahmood, A. H., Kamal, M. R. I., Yashin, S. M., & Zihan, Z. U. A. (2017). Effects of maximum size of brick aggregate on properties of concrete. Construction and Building Materials, 134, 713–726.CrossRefGoogle Scholar
  29. Wijayasundara, M., Mendis, P., & Crawford, R. H. (2017). Methodology for the integrated assessment on the use of recycled concrete aggregate replacing natural aggregate in structural concrete. Journal of Cleaner Production, 166, 321–334.CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2018

Authors and Affiliations

  • Ali Heidari
    • 1
  • Masoumeh Hashempour
    • 1
  • Hamed Javdanian
    • 1
  • Mehdi Karimian
    • 1
  1. 1.Department of Civil EngineeringShahrekord UniversityShahrekordIran

Personalised recommendations