Thermal reliability analysis of the central detector of JUNO
- 6 Downloads
The Jiangmen Underground Neutrino Observatory (JUNO) is a multipurpose neutrino experiment designed to determine neutrino mass hierarchy, precisely measure oscillation parameters and study solar neutrinos, supernova neutrinos and geo-neutrinos, etc. The central detector (CD) of JUNO has 20,000 tons liquid scintillator as target mass, which contains inside a huge acrylic sphere with inner diameter of 35.4 m, supported by a stainless steel structure. The whole structure of CD will be installed inside a cylindrical water pool, and the acrylic sphere will be submerged in the center of water pool. The operating temperature of CD is designed to be 21 °C as long as over 20 years, which is determined by the mechanical requirement of the structure and physics consideration.
For this operating temperature, a special cooling system will be used to maintain the temperature inside the water pool. The main structure of CD is composed of acrylic and stainless steel, and they have much different thermal expansion coefficients, strengths and life times. Change in temperature may affect the safety of CD. As part of reliability analysis, the effect of cooling system failure on the CD is considered, and finite element method is used in our thermal calculation. In this article, the temperature fields before and after cooling system failure are calculated and analyzed, and the temperatures of different locations of water pool after cooling system failure are compared and discussed in detail.
KeywordsThermal analysis Finite element method Central detector JUNO
This work is supported by the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDA100102).
- 3.Z.M. Wang, JUNO Central Detector and its prototyping, in XIV International Conference on Topics in Astroparticle and Underground Physics (TAUP 2015). IOP PublishingGoogle Scholar
- 5.T. Adam, et al., JUNO Conceptual Design Report. arXiv:1508.07166v2 [physics.ins-det] (2015)
- 6.F.J. Luo, Y.K. Heng et al., PMT overshoot study for the JUNO prototype detector. Chin. Phys. C 2016(9), 89–94 (2016)Google Scholar
- 8.H.F. Li et al., Research on design of the main stainless steel structure of JUNO Central Detector. Build. Struct. 2018(10), 92–97 (2018)Google Scholar
- 9.J.D. Strachiw, Handbook of Acrylic for Submersibles Hyperbaric Chambers and Aquaria (Best Publishing Company, Flagstaff, 2003), pp. 833–856Google Scholar
- 11.D.L. Logan, A First Course in the Finite Element Method, 5th edn. (Cengage Learning, Boston, 2012)Google Scholar
- 12.S.M. Yang et al., Heat Transfer, 4th edn. (Higher Education Press, Beijing, 2006)Google Scholar
- 14.Y.F. Wang, Daya Bay II: a multi-purpose LS-based experiment, in Proceedings of Science (Neutel 2013) 030Google Scholar
- 15.J.N. Reddy, An Introduction to the Finite Method (McGraw-Hill, New York, 1993)Google Scholar
- 17.Erdogan Madenci, Ibrahim Guven, The Finite Element Method And Application In Engineering Using ANSYS (Springer, New York, 2006)Google Scholar
- 18.X.H. Jin, Y.H. Li, Fluid Mechanics (China Electric Power Press, Beijing, 2011)Google Scholar
- 19.J.D. Anderson, Computational Fluid Dynamics (China Machine Press, Beijing, 2015)Google Scholar
- 20.F.P. Incropera, Fundamentals of Heat and Mass Transfer, 6th edn. (PHI Learning Pvt. Ltd., New Delhi, 2007)Google Scholar