Abstract
In order to reduce the unwanted effects due to a solid genesis during the phosphoric acid concentration process and for eventual valorization on an industrial scale and uses of this material. A natural material, extracted from the soil, in the Doukkala region of Morocco, is used for 29% P2O5 phosphoric acid desulphation with a simple protocol, which can be inserted into the manufacturing process. The physico-chemical analysis of this material was performed by XRD, FTIR, TGA-DTA, XRF and SEM–EDX. The XRD shows that the natural material consists mainly of calcite (Ca0.97Mg0.03CO3), quartz (SiO2) and a low clay fraction (illite). Different bonds and groups (Si–O–Si (Al), CO32−) were highlighted by FTIR analysis. The TGA-TDA reveals the decomposition of calcite. XRF and EDX analysis clearly indicate high quantity of calcium and weak amount of Mg element. They showed that it contains mainly 92wt% of Calcite with very low magnesium content, 7 wt% of quartz and 1 wt% of clay-type illite. The modelling of this protocol, by the methodology of experimental designs with the strategy of complete factorial designs with three factors [amount of natural material (Q), temperature (T) and time (t)] and two levels, is statistically validated (R2 = 99.94%) and has shown that temperature and time do not significant effect and the amount of material has an effect on the reduction of sulphate ions. To avoid an excess of calcium (Ca/SO4 = 1), the optimum quantity of material is 26.08 g per litre of acid, which reduced the rate of solid formed to 63.64% during concentration of the 29% acid in P2O5. Such an improvement will undoubtedly have interesting consequences for the improvement of productivity and the protection of industrial equipment.
Similar content being viewed by others
References
Nordengren (1930) brevet américain N 1.776.595
Slack AV (1968) Phosphoric acid. Marcel Dekker, New York
Aboulhassane A, Najah EA, Bounou Y, Zakaria D (2019) 29% P2O5 phosphoric acid desulphation: improving the performance of the unit of concentration. AIDS Patient Care STDs 10:65–75. https://doi.org/10.4236/ajac.2019.103006
Becker P (1989) Phosphates and phosphoric acid: raw materials, technology and economics of the wet process, Fertilizer Science Technology Series, 2nd edn. Marcel Dekker Inc, New York
Kijkowska R, Pawlowska-Kozinska D, Kowalski Z et al (2002) Wet-process phosphoric acid obtained from Kola apatite Purification from sulphates, fluorine, and metals. SeparPurifTechnol 28:197–205. https://doi.org/10.1016/S1383-5866(02)00048-5
Aboulhassane A, Najah EA, Bounou Y, Zakaria D (2019) A natural material for desulphation of the 29% P2O5 phosphoric acid: modeling and optimization. Int J EngSci Res Technol 8:67–74. https://doi.org/10.5281/zenodo.3542462
Impurities in Phosphate Rock (1990) Fertilizer International N°283.
Birken I, Bertucci M, Chappelin J, Jorda E (2016) Quantification of impurities, including carbonates speciation for phosphates beneficiation by flotation. ProcediaEng 138:72–84. https://doi.org/10.1016/j.proeng.2016.02.059
Pereira F (2003) Phosphoric acid production by hydrochloric attack of phosphate ores with reduction of environmental pollution and recovery of rare earths as by-products” Geochemistry, PhD, National School of Mines of Saint-Etienne, France
Cate WE, Deming ME (1970) Effect of impurities on density and viscosity of simulated wet-process phosphoric acid. J ChemEng Data 15:290–295. https://doi.org/10.1021/je60045a016
Khamar L, Guendouzi ME, Amalhay M et al (2014) Evolution of soluble impurities concentrations in industrial phosphoric acid during the operations of desupersaturation. ProcediaEng 83:243–249. https://doi.org/10.1016/j.proeng.2014.09.045
Boukhsib A, Khamar L, Saddik KM, Omari L (2019) Effects of magnesium content on the rheological behaviour of phosphoric acid and on the performances of his industrial manufacturing by the dihydrate wet processes.https://doi.org/10.5281/ZENODO.3339301
Hignett TP (1980) Proceedings of second international congress on phosphorous compounds, Boston, USA, pp 401–429
Gunasekaran S, Anbalagan G, Pandi S (2006) Raman and infrared spectra of carbonates of calcite structure. J Raman Spectrosc 37(9):892–899. https://doi.org/10.1002/jrs.1518
Yan W, Liu D, Tan D et al (2012) FTIR spectroscopy study of the structure changes of palygorskite under heating. SpectrochimActa Part A MolBiomolSpectrosc 97:1052–1057. https://doi.org/10.1016/j.saa.2012.07.085
Boulingui JE, Nkoumbou C, Njoya D et al (2015) Characterization of clays from Mezafe and Mengono (Ne-Libreville, Gabon) for potential uses in fired products. Appl Clay Sci 115:132–144. https://doi.org/10.1016/j.clay.2015.07.029
Srasra E (1994) Infrared spectroscopy study of tetrahedral and octahedral substitutions in an interstratified illite-smectite clay. Clays Clay Miner 42:237–241. https://doi.org/10.1346/CCMN.1994.0420301
Socrates G (2004) Infrared and Raman characteristic group frequencies: tables and charts, 3rd edition. Wiley. ISBN: 978-0-470-09307-8
Castro RAE, Canotilho J, Nunes SCC et al (2009) A study of the structure of the pindolol based on infrared spectroscopy and natural bond orbital theory. SpectrochimActa Par A MolBiomolSpectrosc 72:819–826. https://doi.org/10.1016/j.saa.2008.11.026
Tarte P, Pottier MJ, Procès AM (1973) Vibrational studies of silicates and germinates-V.I.R. and Raman spectra of pyrosilicates and pyrogermanates with a linear bridge. SpectrochimActa Part A 29:1017–1027. https://doi.org/10.1016/0584-8539(73)80141-2
Zviagina BB, Drits VA, Dorzhieva OV (2020) Distinguishing features and identification criteria for K-dioctahedral 1M Micas (illite-aluminoceladonite and illite-glauconite-celadonite series) from middle-infrared spectroscopy data. Minerals 10:153. https://doi.org/10.3390/min10020153
Babou-Kammoe R, Hamoudi S, Larachi F, Belkacemi K (2012) Synthesis of CaCO3 nanoparticles by controlled precipitation of saturated carbonate and calcium nitrate aqueous solutions. Can J ChemEng 90:26–33. https://doi.org/10.1002/cjce.20673
Murakami FS, Rodrigues PO, de Campos CMT, Silva MAS (2007) Physicochemical study of CaCO3 from egg shells. CiêncTecnol Aliment 27:658–662. https://doi.org/10.1590/S0101-20612007000300035
SeyedShahabadi SM, Reyhani A (2014) Optimization of operating conditions in ultrafiltration process for produced water treatment via the full factorial design methodology. Sep PurifTechnol 132:50–61. https://doi.org/10.1016/j.seppur.2014.04.051
Louvet F, Delplanque L, Les plans d’expériences : une approche pragmatique et illustrée ; Partie I à V. Témoignage de l’association expérimentique [1996–2005]. Expérimentique, IUT Orleans, Département QLIO, BP 16729, 45067 Orléans Cedex 2.
Feinberg M (1996) La validation des méthodes d’analyses, une approche chimiométrique de l’assurance qualité au laboratoire, Ed. Masson, Paris 1996
Goupy J (2009) Introduction aux plans d’expériences, 4ème éditions, Lee Creighton, Ed. DUNOD, Paris 2009
Goupy J, (1988) La méthode des plans d’expériences, optimisation du choix des essais et de l’interprétation des résultats, Ed. DUNOD, Paris 1988.
Montgomery DC (2013) Design and analysis of experiments, 8th edn. Wiley, Hoboken
Acknowledgements
"Research carried out within the framework of the University Center for Research Applied Chemistry and Sustainable Development CUR-CA2D of Chouaïb Doukkali University."
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they do not have any conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Najah Elidrissi, A., Aboulhassane, A., El Hadrami, A. et al. Calcite-based material for desulphation of the 29% in P2O5 phosphoric acid: characterization, modelling and optimization. Nanotechnol. Environ. Eng. 6, 23 (2021). https://doi.org/10.1007/s41204-021-00120-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s41204-021-00120-5