Skip to main content

Investigating the effect of elevated temperatures on the properties of mortar produced with volcanic ash

Abstract

During the recent years, the use of pozzolanic materials (e.g., volcanic ash) in concrete and cement manufacturing has increased significantly since it can reduce the environment hazard associated with using Portland cement. In this paper, the effect of elevated temperatures on the physical and mechanical characteristics of building mortar produced with volcanic ash is experimentally explored. In order to evaluate the performance of the mortar, four different proportions of volcanic ash (0, 5, 15, and 25%)—as weight replacement of the cement—were prepared. A series of tests were conducted after 28, 90, and 120 days under different temperatures (25, 200, 500, and 800 °C). This paper demonstrates that the replacement of cement by a proportion of volcanic ash can sustain an acceptable level of compressive strength and improve the overall characterization of the mortar while reducing the amount of CO2 released. The mortar with 15% ratio of the volcanic ash replacement showed better flexural and the tensile strength. This paper also highlights that the volcanic ash replacement affects the late-age properties of the mortar more than the early age ones at both ambient and elevated temperatures.

This is a preview of subscription content, access via your institution.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17

References

  1. 1.

    Drzymała T, Jackiewicz-Rek W, Tomaszewski M, Kuś A, Gałaj J, Šukys R (2017) Effects of high temperature on the properties of high performance concrete (HPC). Procedia Eng 172:256–263. https://doi.org/10.1016/j.proeng.2017.02.108

    Article  Google Scholar 

  2. 2.

    Ibrahim RK, Ramyar K, Hamid R, Taha MR (2011) The effect of high temperature on mortars containing silica fume. J Appl Sci 11:2666–2669. https://doi.org/10.3923/jas.2011.2666.2669

    Article  Google Scholar 

  3. 3.

    Morsy MS, Rashad AM, Shebl SS (2008) Effect of elevated temperature on compressive strength of cement mortar. Build Res J 56:173–185

    Google Scholar 

  4. 4.

    Yüzer N, Aköz F, Öztürk LD (2004) Compressive strength-color change relation in mortars at high temperature. Cem Concr Res. https://doi.org/10.1016/j.cemconres.2004.01.015

    Article  Google Scholar 

  5. 5.

    Li M, Qian CX, Sun W (2004) Mechanical properties of high-strength concrete after fire. Cem Concr Res 34:1001–1005. https://doi.org/10.1016/j.cemconres.2003.11.007

    Article  Google Scholar 

  6. 6.

    Noumowe AN, Siddique R, Debicki G (2009) Permeability of high-performance concrete subjected to elevated temperature (600 °C). Constr Build Mater 23:1855–1861. https://doi.org/10.1016/j.conbuildmat.2008.09.023

    Article  Google Scholar 

  7. 7.

    Lottman BBG, Koenders EAB, Blom CBM, Walraven JC (2017) Spalling of fire exposed concrete. Heron 62:129–166

    Google Scholar 

  8. 8.

    Hertz KD, Sørensen LS (2005) Test method for spalling of fire exposed concrete. Fire Saf J 40:466–476. https://doi.org/10.1016/j.firesaf.2005.04.001

    Article  Google Scholar 

  9. 9.

    Seshu R, Pratusha A (2013) A study on behaviour of normal strength concrete and high strength concrete subjected to elevated temperatures. Mag Concr 65:415–421

    Article  Google Scholar 

  10. 10.

    Khurram N, Khan K, Saleem MU, Amin MN, Akmal U (2018) Effect of elevated temperatures on mortar with naturally occurring volcanic ash and its blend with electric arc furnace slag. Adv Mater Sci Eng. https://doi.org/10.1155/2018/5324036

    Article  Google Scholar 

  11. 11.

    Andrew H, Buchanan C (2002) Structural design for fire safety. Wiley, New Zealand. https://doi.org/10.1201/9781420039931.ch37

    Book  Google Scholar 

  12. 12.

    Phan LT, Carino NJ (2000) Fire performance of high strength concrete: research needs. Adv Technol Struct Eng. https://doi.org/10.1061/40492(2000)181

    Article  Google Scholar 

  13. 13.

    Khoury GA, Majorana CE, Pesavento F, Schrefler BA (2002) Modelling of heated concrete. Mag Concr Res 54:77–101. https://doi.org/10.1680/macr.2002.54.2.77

    Article  Google Scholar 

  14. 14.

    Hertz KD (2005) Concrete strength for fire safety design. Mag Concr Res 57:445–453. https://doi.org/10.1680/macr.2005.57.8.445

    Article  Google Scholar 

  15. 15.

    Endait M, Wagh S (2020) Effect of elevated temperature on mechanical properties of high strength concrete author. Innov Infrastruct Solut 5:1–8. https://doi.org/10.1007/s41062-019-0254-8

    Article  Google Scholar 

  16. 16.

    Siddique R (2012) Properties of concrete made with volcanic ash. Resour Conserv Recycl 66:40–44. https://doi.org/10.1016/j.resconrec.2012.06.010

    Article  Google Scholar 

  17. 17.

    Karahan O, Hossain KMA, Atis CD, Lachemi M, Ozbay E (2017) Ground granulated pumice-based cement mortars exposed to abrasion and fire. Arab J Sci Eng 42:1321–1326. https://doi.org/10.1007/s13369-016-2403-0

    Article  Google Scholar 

  18. 18.

    Samizi M, Josephat J (2017) Utilizing volcanic ashes as partial replacement of cement in concrete production. Int J Innov Res Dev 6:174–180. https://doi.org/10.24940/ijird/2017/v6/i6/jun17108

    Article  Google Scholar 

  19. 19.

    Karim MR, Hossain MM, Khan MNN, Zain MFM, Jamil M, Lai FC (2014) On the utilization of pozzolanic wastes as an alternative resource of cement. Materials (Basel) 7:7809–7827. https://doi.org/10.3390/ma7127809

    Article  Google Scholar 

  20. 20.

    ASTM C618-05 (2005) Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. https://doi.org/10.1063/1.4756275

  21. 21.

    ASTM C150/C150M-16 (2016) Standard specifications for Portland cement, 1–9. https://doi.org/10.1520/c0150

  22. 22.

    Iraqi specification (1984) No. 5/1984: Portland cement

  23. 23.

    Iraqi specification. No. 45/1984 (1984) Aggregate from natural sources for concrete and construction

  24. 24.

    C109/C109M-13 (2013) Standard test method for compressive strength of hydraulic cement mortars. https://doi.org/10.1520/c0109

  25. 25.

    ASTM C 1437-07 (2009) Standard test method for flow of hydraulic cement mortar. Annu B ASTM Stand, p 6–7

  26. 26.

    ASTM C642-13 (2013) Standard test method for density, absorption, and voids in hardened concrete. https://doi.org/10.1520/c0642-13.5

  27. 27.

    ASTM C348 (1998) Standard test method for flexural strength of hydraulic-cement mortars. Annu B ASTM Stand 04:2–7. https://doi.org/10.1520/c0348-14.2

  28. 28.

    Demirel B, Keleştemur O (2010) Effect of elevated temperature on the mechanical properties of concrete produced with finely ground pumice and silica fume. Fire Saf J 45:385–391. https://doi.org/10.1016/j.firesaf.2010.08.002

    Article  Google Scholar 

  29. 29.

    Ahmad SF, Shaikh Z, Naik PH (1992) Portland-pozzolana cement from sugarcane bagasse ash; KVIC Technology in the Production of Lime and Alternative Cements in India. Lime Other Altern Cem. https://doi.org/10.3362/9781780442631.011

    Chapter  Google Scholar 

  30. 30.

    Al-Zou’By J, Al-Zboon KK (2014) Effect of volcanic tuff on the characteristics of cement mortar. Ceramica 60:279–84. https://doi.org/10.1590/s0366-69132014000200018

    Article  Google Scholar 

  31. 31.

    Hossain KMA (2003) Blended cement using volcanic ash and pumice. Cem Concr Res 33:1601–1605. https://doi.org/10.1016/S0008-8846(03)00127-3

    Article  Google Scholar 

  32. 32.

    Georgali B, Tsakiridis PE (2005) Microstructure of fire-damaged concrete: a case study. Cem Concr Compos 27:255–259. https://doi.org/10.1016/j.cemconcomp.2004.02.022

    Article  Google Scholar 

  33. 33.

    Chan YN, Peng GF, Anson M (1999) Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures. Cem Concr Compos 21:23–27. https://doi.org/10.1016/S0958-9465(98)00034-1

    Article  Google Scholar 

Download references

Acknowledgements

The author is grateful to the AL-Mustansiriyah University (www.uomustansiriyah.edu.iq) and the staff of the materials laboratory of the Department of Civil Engineering for providing assistance in this research.

Author information

Affiliations

Authors

Corresponding author

Correspondence to Rwayda Kh. S. Al-Hamd.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Mohamad, S.A., Al-Hamd, R.K.S. & Khaled, T.T. Investigating the effect of elevated temperatures on the properties of mortar produced with volcanic ash. Innov. Infrastruct. Solut. 5, 25 (2020). https://doi.org/10.1007/s41062-020-0274-4

Download citation

Keywords

  • Elevated temperature
  • Volcanic ash
  • Natural pozzolan
  • Mortar