Skip to main content
SpringerLink
Log in

Effect of moulding water content on strength characteristics of a cement-stabilized granular lateritic soil

  • Technical paper
  • Published:
Innovative Infrastructure Solutions Aims and scope Submit manuscript

Abstract

Performance of the cement-stabilized soils primarily depends on the soil type, cement quantity, moulding moisture content and ambient temperature. Control of the moulding moisture content and curing temperature are the challenges for most of the pavement engineers as these play a significant role in the strength development of stabilized soils. In the work presented here, an effort has been made to study the effect of the moulding water content on compressive strength and flexural strength of a stabilized granular lateritic soil collected from the eastern part of India. A detailed experimental programme was conducted, which involves various strength tests such as unconfined compressive strength test, California bearing ratio test and four-point flexure test. Microstructural analysis was also conducted using a scanning electron microscope and X-ray diffraction techniques to study the mechanism behind the variation of strength with varying moisture contents. Effect of moisture was also investigated through measurement of residual compressive strength. It is observed that compressive strength decreases with an increase in the moulding moisture content; however, the flexural strength increases with an increase in moulding moisture content within the testing range of moisture content around optimum moisture content (OMC), i.e. OMC-2% to OMC+2%.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14

Similar content being viewed by others

References

  1. Alexander LT, Cady JG (1962) Genesis and hardening of laterite in soils. US Dept. of Agriculture

  2. Biswal DR, Sahoo UC, Dash SR (2016) Characterization of granular lateritic soils as pavement material. Transp Geotech 6:108–122

    Article  Google Scholar 

  3. Pinnard IM, Netterberg F and Paige-green P (2014) Review of specification for use of laterite in road pavements. Association of Southern Africa National Road Agency

  4. Mahalinga-Iyer U, Williams DJ (1997) Properties and performance of lateritic soil in road pavements. Eng Geol 46(2):71–80

    Article  Google Scholar 

  5. Biswal DR, Sahoo UC, Dash SR (2017) Strength and stiffness studies of cement stabilized granular lateritic soil. In: International congress and exhibition sustainable civil infrastructures: innovative infrastructure geotechnology. Springer, Cham, pp 320–336

  6. Paige-Green P, Pinard M, Netterberg F (2015) A review of specifications for lateritic materials for low volume roads. Transp Geotech 5:86–98

    Article  Google Scholar 

  7. Caro S, Agudelo JP, Caicedo B, Orozco LF, Patiño F, Rodado N (2019) Advanced characterisation of cement-stabilised lateritic soils to be used as road materials. Int J Pavement Eng 20(12):1425–1434

    Article  Google Scholar 

  8. Gidigasu M (2012) Laterite soil engineering: pedogenesis and engineering principles. Elsevier, Amsterdam

    Google Scholar 

  9. Mengue E, Mroueh H, Lancelot L, Eko RM (2017) Mechanical improvement of a fine-grained lateritic soil treated with cement for use in road construction. J Mater Civ Eng 29(11):04017206

    Article  Google Scholar 

  10. Joel M, Agbede IO (2011) Mechanical-cement stabilization of laterite for use as flexible pavement material. J Mater Civ Eng 23(2):146–152

    Article  Google Scholar 

  11. Beckett C, Ciancio D (2014) Effect of compaction water content on the strength of cement-stabilized rammed earth materials. Can Geotech J 51(5):583–590

    Article  Google Scholar 

  12. Mun W, McCartney JS (2015) Compression mechanisms of unsaturated clay under high stresses. Can Geotech J 52(12):2099–2112

    Article  Google Scholar 

  13. Biswal DR, Sahoo UC, Dash SR (2019) Durability and shrinkage studies of cement stabilised granular lateritic soils. Int J Pavement Eng 20(12):1451–1462

    Article  Google Scholar 

  14. Beckett CT, Augarde CE (2013) Prediction of soil water retention properties using pore-size distribution and porosity. Can Geotech J 50(4):435–450

    Article  Google Scholar 

  15. Millogo Y, Hajjaji M, Ouedraogo R, Gomina M (2008) Cement-lateritic gravels mixtures: microstructure and strength characteristics. Constr Build Mater 22(10):2078–2086

    Article  Google Scholar 

  16. Chen X, Huang W, Zhou J (2012) Effect of moisture content on compressive and split tensile strength of concrete. Indian J Eng Mater Sci 19(6):427–435

    Google Scholar 

  17. Wang C, Li W (2016) Factors affecting the mechanical properties of cement-mixed gravel. Adv Mater Sci Eng. https://doi.org/10.1155/2016/876032

    Article  Google Scholar 

  18. Ribeiro D, Néri R, Cardoso R (2016) Influence of water content in the UCS of soil–cement mixtures for different cement dosages. Procedia Eng 143:59–66

    Article  Google Scholar 

  19. Horpibulsuk S, Katkan W, Sirilerdwattana W, Rachan R (2006) Strength development in cement stabilized low plasticity and coarse grained soils: laboratory and field study. Soils Found 46(3):351–366

    Article  Google Scholar 

  20. Vichan S, Rachan R, Horpibulsuk S (2013) Strength and microstructure development in Bangkok clay stabilized with calcium carbide residue and biomass ash. Sci Asia 39:186–193

    Article  Google Scholar 

  21. ASTM D2487 (2011) Standard practice for classification of soils for engineering purpose (unified soil classification system). ASTM International, West Conshohocken

    Google Scholar 

  22. AASHTO (2011) Standard specifications for transportation materials and methods of sampling and testing. AASHTO, Washington

    Google Scholar 

  23. ASTM D854-14 (2014) Standard test methods for specific gravity of soil solids by water pycnometer. ASTM International, West Conshohocken

    Google Scholar 

  24. ASTM D4318-17 (2007) Standard test methods for liquid limit, plastic limit, and plasticity index of soils. ASTM International, West Conshohocken

    Google Scholar 

  25. ASTM 1557 (2012) Standard test methods for laboratory compaction characteristics of soil using modified effort. ASTM International, West Conshohocken

    Google Scholar 

  26. Code IS. IS 1498–1970. Classification and identification of soils for general engineering purposes (first revision)

  27. Chakrabarti S, Kodikara J (2003) Basaltic crushed rock stabilized with cementitious additives: compressive strength and stiffness, drying shrinkage, and capillary flow characteristics. Transp Res Rec J Transp Res Board 1819:18–26

    Article  Google Scholar 

  28. Yeo YS, Jitsangiam P, Nikraz H (2011) Mix design of cementitious base course. In: International conference on advances in geotechnical engineering, pp 379–385

  29. Austroads (2012) Guide to pavement technology. 2: Pavement structural design. Austroads, Sydney

    Google Scholar 

  30. Paul DK, Theivakularatnam M, Gnanendran CT (2015) Damage study of a lightly stabilized granular material using flexural testing. Indian Geotech J 45(4):441–448. https://doi.org/10.1007/s40098-015-0158-2

    Article  Google Scholar 

  31. ASTM D1633-00 (2007) Standard test methods for compressive strength of molded soil cement cylinders. ASTM International, West Conshohocken

    Google Scholar 

  32. ASTM D1632-07 (2007) Standard practice for making and curing soil–cement compression and flexure test specimens. Laboratory ASTM D1632-07, West Conshohocken

    Google Scholar 

  33. ASTM D1635M-12 (2012) Standard test method for flexural strength of soil–cement using simple beam using third-point loading. ASTM International, West Conshohocken

    Google Scholar 

  34. Bui QB, Morel JC, Hans S, Walker P (2014) Effect of moisture content on the mechanical characteristics of rammed earth. Constr Build Mater 54:163–169

    Article  Google Scholar 

  35. Kota PB, Hazlett D, Perrin L (1996) Sulfate-bearing soils: problems with calcium-based stabilizers. Transp Res Rec 1546(1):62–69

    Article  Google Scholar 

  36. Yin C, Zhang W, Jiang X, Huang Z (2018) Effects of initial water content on microstructure and mechanical properties of lean clay soil stabilized by compound calcium-based stabilizer. Materials 11(10):1933

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. School of Infrastructure, Indian Institute of Technology, Bhubaneswar, Odisha, 752050, India

    Pawan Kumar Chamling & Umesh Chandra Sahoo

  2. School of Civil Engineering, KIIT Deemed to be University, Bhubaneswar, Odisha, 751024, India

    Dipti Ranjan Biswal

Authors
  1. Pawan Kumar Chamling
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Dipti Ranjan Biswal
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Umesh Chandra Sahoo
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Dipti Ranjan Biswal.

Ethics declarations

Conflict of interest

The authors declare that they have no competing interests.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Chamling, P.K., Biswal, D.R. & Sahoo, U.C. Effect of moulding water content on strength characteristics of a cement-stabilized granular lateritic soil. Innov. Infrastruct. Solut. 6, 82 (2021). https://doi.org/10.1007/s41062-020-00410-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s41062-020-00410-y

Keywords

Search

Navigation